The CONNECT RX200N-RP Wireless RDM/DMX Receiver for SkyPanel from Exalux is an ultracompact wireless RDM/DMX receiver. Its RDM and DMX compatibility makes it ready for the future of DMX. CRMX communications by LumenRadio is DMX512 + RDM-ANSI E1.20 compliant and supports 512 channels in one universe. The XLR connector and antenna on the RX200N-RP CRMX receiver are reversed by 180° compared to the standard version, making it ideally compatible with ARRI SkyPanel LED panels. It works perfectly with the Exalux CONNECT CRMX family, such as the TX100 family. It also works perfectly with other CRMX devices available on the market, such as EXALUX CONTROL ONE or CONTROL SKY.

Thanks to its wide supply range (+5 to 26 VDC), the RX200N can be powered through the USB connector of a DMX fixture, a V-lock battery through the D-Tap connector, or any external power supply, available separately.

Built-In LumenRadio CRMX Receiver    Designed for ARRI SkyPanel    1 DMX Universe    Wide-Range DC Power Mode    DMX and RDM Compliant    Neutrik 5-Pin XLR Connector    Aluminium Unibody Enclosures    Removable Antenna    Universal 3/8"-16 Mounting

Related Questions and Answers

Q: 1. Can this be used to stream Tidal and Spotify?

A: Yes, so long as you are using it with an iOS device.

Q: 2. This system works with any app like luminaire or blackout?

A: The SWIT Pocket Wireless DMX Controller Kit cannot work with apps like Luminaire or Blackout.

Q: 3. Compatible with Ratpac Satellite?

A: The Godox TimoLink RX Wireless DMX Receiver BH #GORX is a CRMX receiver and should be able to receive signal from any CRMX compatible transmitter.

Q: 4. Will this work with the Exalux Control One?

A: No, the Exalux system runs on a CRMX, DMX512 protocol system we suggest looking into the following adapter which works with the Exalux system via DMX input and will provide a Lumen Radio CRMX protocol signal. Godox TimoLink TX Wireless DMX Transmitter BH #GOTX • MFR #TIMOLINK TX https://www.bhphotovideo.com/c/product/1748675-REG/godox_tx_wireless_dmx_transmitter.html

Q: 5. Will this receiver communicate with the Exalux Control One?

A: The Blizzard wiCICLE Skywire Wireless DMX Receiver is not compatible with the Exalux CONTROL ONE DMX Controller. The Exalux CONTROL ONE DMX Controller is LumenRadio CRMX. So you need one like this, https://bhpho.to/3Mbq2Ny.

Q: 6. If I just need to adjust light intensity, how many DMX 512 internally compatible lights (not needing the DMX adapters) can I control with this controller?

A: No. The following system will only run off a Controller/Transmitter wireless system.

Q: 7. how many light adapter are include?

A: No light adapter is included with this SWIT Pocket Wireless DMX Controller.

Q: 8. Will this controller work with pro LED lights that have built-in DMX 512 receivers, or only with the SWIT adapters?

A: Yes. As long as the led are dimmable units.

Q: 9. How much Wireless DMX Transmitter needs to turn 16 lights ?How much Wireless DMX ReceiverNeed to turn 16 lights ?Tank you!

A: If you are using a lighting control board, you can connect one transmitter to the output and one receiver to the first light in your chain. Then, you can daisy chain the remaining lights together. So, one receiver and one transmitter should be enough, unless you are using all your lights far away from each other and don't want to have any cables. In that case, each light would need both a receiver (to get the signal from the previous unit) and a transmitter (to send it to the next unit in the sequence).

Q: 10. If I used all three of these with a board like the SDC12 how would channel assignments work? Would they just go 1, 2, 3 automatically or would I need to do something else?

A: You assign a Dmx address for each light and choose channels for each fixture as needed.