Only Connect 2.4 To Wifi Range Extender

Exalux Connect Etx4 Wireless Dmx/rdm Transmitter For Connect+

Product Code: ga126229
Availability: In Stock

$5,196.00 $6,650.88

Qty

0 reviews Write a review

Description
Reviews (0)

The CONNECT eTX4 Wireless DMX/RDM Transmitter for CONNECT+ from Exalux features four CRMX/CRMX² transmitters in an ultracompact unit. The eTX4 can be set up using the CONNECT+ control panel simply and intuitively. It is ready for use, powered by the CONNECT+ Dual-Band Wi-Fi to DMX Gateway, and it is automatically detected and powered once the two units are connected.

CONNECT+ Add-On Unit Compliant with LumenRadio CRMX / CRMX² Range: 546 to 1093 Yards Frequency Range: 2.402 to 2.480 GHz 5/8" Threaded Female Receiver 4 x Whip-Hinged 50-Ohm Antennas

Key Specs
Inputs/Outputs	0x
Channels	0
Protocol	DMX512, RDM
General
Inputs/Outputs	0x
Channels	0
Cooling System	Passive
Sensitivity	20 dBm
Wireless Range	547 yd / 500 m
Frequency	2.4 to 2.48 GHz
Power
Power Consumption	6 W
PoE Port Power	Yes
Compatibility
Protocol	DMX512, RDM
Physical
Operating Conditions	14 to 131°F / -10 to 55°C
Storage Conditions	-4 to 167°F / -20 to 75°C
Certifications	CE, RoHS
Environmental Resistance	Dust-Resistant (IP3X)
Material of Construction	Aluminum
Dimensions	9.2 x 7.2 x 4.4" / 234.0 x 183.0 x 110.7 mm (Including Antenna) 9.2 x 7.2 x 1.1" / 234.0 x 183.0 x 28.5 mm (Without Antenna)
Weight	2.1 lb / 950 g

CONNECT+ add-on unit
Four transceivers / four DMX universes
DMX + RDM compliant
CRMX, CRMX², W-DMX compliant
Removable antennas
Omnidirectional antenna
Powered by CONNECT+ Dual-Band Wi-Fi to DMX Gateway
User-friendly design
5/8" spigot mount

Related Questions and Answers

Q: 1. Does this work with b2

A: Yes it does work with Profoto B2

Q: 2. Will this work on the Profoto a1x?

A: Yes the Profoto Connect Transmitter can fire the Profoto A1X.

Q: 3. Can this be used with Nikon flashs?

A: No, it only works with, AirTTL: A1 AirTTL, B10 250 AirTTL, B1X 500 AirTTL, B2 250 AirTTL, D2 500 AirTTL, D2 1000 AirTTL, Pro-10 2400 AirTTL, and B1 500 AirTTL Air without TTL or HSS: D1 Air 250, D1 Air 500, D1 Air 1000, D4 1200 Air, D4 2400 Air, D4 4800 Air, Pro-B4 1000 Air, Pro-8a 1200, and Pro-8a 2400

Q: 4. Is the Profoto Connect compatible with the Profoto B10X or B10X Plus?

A: Yes, the Profoto Connect Transmitter can fire the Profoto B10X and B10X Plus monolights.

Q: 5. I don't have an Iphone, can I use the flash without the app, why isn't the app available for android? Not all photographers use apple products!

A: The app is only to control the output of the flash if using it in manual mode. Otherwise, the transmitter will fire a Profoto flash like the A1 if set to auto mode.

Q: 6. Curious where this fits in if you already have the Profoto Air remote?

A: This would be an either or. If you have the Air remote you probably would not need one of these remotes. This is designed for worry free nothing to adjust simplicity.

Q: 7. Will this work for the original a7, I only see the 2 and 3 listed.

A: Unfortunately it is not compatible with an A7.

Q: 8. Can it be used for two A1 lights or do I need the Air Remote for this?

A: The Connect only has one group. You can fire two lights but they will have the same settings. You will need an AirTTL if you want full control of two lights on separate settings.

Q: 9. Will this work with the Canon G15?

A: Unfortunately, this has not been tested with the Canon G15 to confirm its compatibility. Your results may vary.

Q: 10. How many lights can this transmitter control?

A: The remote has only one group. You could use two lights but they will have the same settings.

There are no reviews for this product.