The CONTROL ONE DMX Controller Rental Kit from Exalux is an all-in-one wireless DMX controller specially designed to control lights with intuitive and simplicity. It is an ideal controller for DMX devices on cinema, television, and video sets. It pairs perfectly with Exalux Connect CRMX components, such as the RX100 and RX100s wireless receivers, as well as other brand CRMX devices. It offers five DMX applications in a single box that can be operated using an external power supply, a V-lock battery, or a rechargeable power bank.

This universal controller has a DMX console with 512 sliders and a recorder with a capacity for eight memories. The CONTROL ONE is user-friendly and future-proof, allowing DMX libraries to be updated via USB. Settings can be locked with a PIN code, locking both the 5" touchscreen and the hardware being controlled.

The included stand adapter and hard case make it easy to carry the CONTROL ONE to locations for setup.

Compatible with EXALUX CONNECT Ecosystem    5-in-1 DMX Tool    1 DMX Universe, DMX512-A Interface    DMX Library Presets up to 40 DMX Units    8 Switches to Save Memories    Lock/Unlock Function    Estimated Range: 1094 Yards    Tempered Glass Screen Protector    Neck Lanyard and Spigot Stand Adapter    Weather-Resistant Case with Foam Liner

Related Questions and Answers

Q: 1. how well would 6ft-10ft of PVC Schedule 40 Pipes hold up?

A: That depends on how much weight you are putting on the Pipes and how you intend to use them. If you plan to lay your dolly track on the floor for instance 6-10 feet probably isn't going to be a problem, however, if you plan to elevate the dolly then 6-10 feet will become very problematic. PVC Pipes are known to flex and break therefore you'd have to be extremely cautious about how and where you apply your supports. In addition to that, the heavier the payload the more cautious you have to be about how and where the supports are located. It is safest to use metal tracks if available at that distance.

Q: 2. How does this compare with other similar dollys such as Dana Dolly and ProAim Polaris?

A: The main difference between the Matthews Dutti Dolly (Black, 20 x 24") and the other two dollys is that the Matthews Dutti Dolly (Black, 20 x 24") comes with wheels that allow it to roll on the floor as well as on a track. Other than that all three dollys are very similar in form and function.

Q: 3. If I just need to adjust light intensity, how many DMX 512 internally compatible lights (not needing the DMX adapters) can I control with this controller?

A: No. The following system will only run off a Controller/Transmitter wireless system.

Q: 4. Does this item(#395400) actually come with the Mitchell Riser? When I see it listed on other sites.. it does not

A: The Matthews Dutti Dolly with Mitchell Riser (Aluminum) comes with 1 x Dutti Dolly1 x Low Profile Mitchell Tie Down.

Q: 5. Does this need 3 Slider Stands since it has 3 track brackets ?

A: Yes it does.

Q: 6. Can this be run plugged into house power for longer run-times?

A: You can use a usb c cable with Xuma 2.4A USB Charger with Folding Prongs BH #XUCAC124 • MFR #UCAC-124 or similar on ac power yes.

Q: 7. Will this controller work with pro LED lights that have built-in DMX 512 receivers, or only with the SWIT adapters?

A: Yes. As long as the led are dimmable units.

Q: 8. Where is the Dutti Dolly low profile tie down that video says comes with?

A: You can search the Low Profile Tie Down on msegrip.com as part number: 1062-3

Q: 9. What are the best track dolly for this product? Can this product use BH #PRPTRK12 or B&H # GLSYL101 ??

A: Matthews states that you can use the Matthews Dutti Dolly (Black, 20 x 24") with speed rail or commercial tubing that can be round, square, angled or PVC pipe, though 1.25" square tubing is the recommended choice by Matthews.

Q: 10. This system works with any app like luminaire or blackout?

A: The SWIT Pocket Wireless DMX Controller Kit cannot work with apps like Luminaire or Blackout.