Whether you are an owner-operator who needs a case for your Canon C300 Mark III camera or a rental house looking to protect its investment, this black Carry-On Case for Canon C300 Mark III with a red insert from Foama has you covered. Nestled inside a Nanuk 935 case, the durable EVA foam is custom-cut to accommodate your camera and specific accessories.

The foam insert is custom-made to fit each piece of equipment perfectly, so you can rest assured knowing it's safe from any damage. While most foam inserts on the market are made from open-cell PE or PU foams that are less protective and not as durable, the Foama insert is designed using the highest quality closed-cell EVA foam, which is much stronger and more long-lasting than any other type on the market.

For Camera & Select Accessories    20.5 x 11.3 x 7.5" Interior    Crush, Dust & Waterproof    Extendable Handle & Low-Profile Wheels    Lightweight NK-7 Polypropylene Resin    PowerClaw Latching System    Automatic Pressure-Release Valve    Molded-In Bezel System & Padlock Holes    Comfortable Soft-Grip Handle

• Canon C300 Mark III with PL mount
• 5" viewfinder monitor
• CFexpress memory cards
• Sonnet
• Accessory pocket
• Canon BP A60 battery charger
• Canon CG-A10 dual-battery charger

The gasketed lid is held fast with dual PowerClaw latches. This patented latch system uses compressive force to tightly clamp the case shut to a waterproof and dustproof IP67 rating, with an integrated slide lock that prevents the case from opening during transport or if dropped. For additional security, there are two 0.34" diameter padlock holes integrated into the case and lid. A molded-in bezel system allows the use of optional inserts that can be installed quickly and easily without the need to modify your case. Its built-in pressure relief valve regulates the internal pressure, keeping your gear and the case from getting crushed during air travel and allowing you to open it without having to break a tough pressurized seal.

Related Questions and Answers

Q: 1. What mount is need for a c300 mark ii

A: You can use the Canon CL-V2 Clamp Base for EVF-V70 to attach the Canon EVF-V70 OLED Viewfinder for C700

Q: 2. can I use the $2 dollar Pearstone 3.5mm Stereo Male to Female Extension Cable instead of this?

A: No, using the Pearstone 3.5mm Stereo Male to Female Extension Cable, or any standard 3.5 extension cable, won't work because it doesn't have the necessary data connections that allow the handgrip to communicate with the camera.

Q: 3. Will this support 1920x1080 resolution at 120fps on the C300 mk3 ?

A: The EVF has a maximum refresh rate of 60p. This does not affect your ability to record or view footage that is 1920x1080 at 120fps. The camera processes so that the image can be displayed properly on the EVF.

Q: 4. Will auto focus work with the fujinon xk 20-120 while using this?

A: No it will not.

Q: 5. would this work with a Canon C100 Mark I?

A: No, the Wooden Camera PL Mount for Canon C300 Mark III and C500 Mark II would not work with the Canon C100. The listed cameras design allows this adapter to work. Only Canon C300mkIII, C500mkII the are supported.

Q: 6. What top handles work with this plate?

A: It has a built in Z-Rail perfect for adding the Zacuto Tactical Handle. Or if desired, you can reattach your Canon Handle to the plate. If you opt to use Canon's camera handle, and need to mount an Axis for a Gratical EVF, you can mount the Z-Rail Axis mount to the front of your top plate and it will give you a 15mm quick release rod port to mount the Axis Mini, EVF Mount.

Q: 7. Is it possible to attach a 15mm rod ports adapter to the back of the baseplate? I would like to use this baseplate with a rear rod-mounted shoulder pad (instead of having a shoulder pad directly under the baseplate)

A: Yes. Please review the following item. Revo 15mm Counterweight for Shoulder Rigs v2 (4.6 lb) BH #RECWSR1500A • MFR #CW-SR1500-A https://bhpho.to/3yDDl2F

Q: 8. On the C300mkii, I'm assuming you will not be able to use this simultaneously with the monitor unit, correct?

A: You are correct in your assumption. You will not be able to use EVF-V70 and the Monitor on the C300 Mark II at the same time.

Q: 9. Will this extender work c300ii

A: No, the SHAPE Relocator Extension Cable for Canon C500 Mark II and C300 Mark III is not listed for use with the Canon Cinema EOS C300 Mark II Camcorder Body with Dual Pixel CMOS AF (EF Lens Mount). Consider the SHAPE Grip Relocator Extension Cable for Canon EOS C Series Camera BH #SHC300RE instead. See the link below: https://bhpho.to/3zjUdvU

Q: 10. Is there any material difference between this shoulder pad and the Shape Compact Revolt? I’m aware this is supposed to fit the c500II/c300iii, but what does that actually mean? Or is it just branding?

A: The SHAPE V-Lock Quick Release Baseplate for Canon C500 Mark II and C300 Mark III (BH #SHC52BP) includes an adapter plate that elevates the aforementioned Canon cameras to a proper optical center. Otherwise it is the same as the SHAPE Compact Revolt Shoulder Baseplate (BH #SHBP20).