The Lynx Technik AG yellobrik Analog Sync/Video Fiber Optic Receiver provides two analog outputs and supports single-mode ST fiber connection. This NTSC/PAL composite video to fiber optic receiver is a compact device. It is specifically designed to combat the restrictions involved with the distribution of broadcast-quality analog reference and composite video signals over a long distance. Pairing of this receiver with the OTX 1712 Fiber Optic Transmitter gives a transmission system for analog sync reference signals or NTSC/PAL composite video signals. This device is useful for reference sync distribution between remote installations to maintain correct synchronization.

The ORX 1702 Receiver has the technology to maintain a high degree of sync and burst phase stability during fiber reception and analog conversion. It receives SDI signals (including reference and other relevant information) before they are converted to analog signals. Therefore, when this receiver is used for 525 or 625 SDI video sources, it is possible to convert the signals to an analog NTSC or PAL composite output directly.

Supports analog black burst, bi-level, and tri-level sync signals

NTSC and PAL composite video compatible

Supports two outputs

Broadcast-quality performance

Supports hot swapping and hot plugging

Related Questions and Answers

Q: 1. Can I run this through a network patch panel in order to use existing wiring in walls? What is the length of the cat5/6 limit?

A: Ideally, you want to connect the Cat5/6 directly to the units to achieve a run that can send a stereo signal up to 1000 ft.

Q: 2. Does it come with the BNC connectors at the back of the OpenGear 3.0 frame?

A: The Rear Input/Output Analog Video Module does not come with this DA. We do however have it available for a separate purchase on our website.

Q: 3. how do i control my stage monitor sound?

A: You use the Aux sends to feed all your cue mixes from the desk. This desk has 4 Aux sends which should be fine if you are doing monitor mixes from stage left or right. Then whoever is doing FOH will have their hands full with another desk.

Q: 4. Hello. Please tell me are LC SFP modules included in Lynx Technik AG ORR 1802 BH #LYORR1802 ?

A: Yes, An LC SFP is included with the Lynx Technik AG yellobrik ORR 1802 Dual Channel 3Gbit SDI to Fiber Receiver. Includes Module, SFP Module, AC power supply Spec sheet - https://bit.ly/3UPhleY

Q: 5. I would like to mount this in a 10 U slant top mixer case (B&H # MAMAM14UW), is it 10U in size?

A: You may need the 19 Rack kit for the ZED-14 - Order part number: ZED1402-RK19:Allen & Heath ZED-14-RK19 Rack Mounting Kit for ZED-12FX and ZED-14B&H # ALZED14RK19

Q: 6. Hello. Please tell me are LC SFP modules included in Lynx Technik AG OTT 1812 BH #LYOTT1812?

A: Yes, An SFP is included with the Lynx Technik AG Dual-Channel 3Gbit SDI to Fiber Transmitter. Includes Module, SFP Module, AC power supply

Q: 7. is this outboard gear compatible with protools?

A: The mixer has a USB input/output interface. Assuming that your PC is running Pro Tools and that this program accepts input via the USB port on your computer, then it should be compatible. Also, the mixer comes with a free download of Cakewalk's Sonar LE, which performs a similar function. I would recommend that you test Pro Tools to make sure it can use the USB interface first.

Q: 8. Is there a pre-made XLR audio break-in/out cable assembly available from Lynx Technik (or someone else) that could be used with the 25 pin connector on this unit?

A: According to the manufacturer, that while the included D-Sub Screw Terminal Adapter PCB answers the needs of 99% of it's users, there is a special order item. that might suit you RAC MF25-4/4 Adapter Cable. http://bit.ly/1eg8tKW If you wish to order this, please email us. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 9. i purchased a zed 428 used with no recording software. how can i get the software?

A: Hi Radcliffe, Since SONAR/Cakewalk went out of business, we no longer include that software with our ZED consoles. The ZED will work with any other DAW, however.

Q: 10. Will this card work with the AJA OG-X-FR frame ?

A: Yes it should. This is an OpenGear Card, meant to go in other OpenGear Frames. This card should work in that OpenGear Frame from AJA.