The Monoball P1+ with ClicPan and Monoball Fix Receiver from Arca-Swiss is a tripod head made for large cameras and long focal length lenses. It has a large ball to ensure a high capacity while maintaining fluid movements. It has a slotted opening that allows the head to tilt 90° to quickly and easily change from a horizontal to a vertical camera orientation.

The new Monoball p1+ has improved friction control, providing more control over heavier loads up to 66 lb, and less tension with lighter loads. The sensitivity threshold can be set by turning the knurled wheel and stored by turning the friction wheel

The top of the Monoball p1+ has a ClicPan panning platform that can be either freely panned or panned in preset selectable steps. It has a range of 360° and a precision scale for accurate and repeatable results. The top of the head features a receiver that is only compatible with newer style Arca-Swiss Monoball Fix-type camera plates. Monoball Fix quick releases have a single channel design and are only compatible with monoball Fix camera plates and accessories, or with Arca-type camera monorails. Monoball Fix and Arca-type camera rails mount in the lower channel of the quick release.

Load Capacity: 66 lb    Height: 3.8"    Weight: 1.2 lb    Monoball Fix Receiver    360° Pan with Independent Pan Lock    Precision Panoramic Scale    Bubble Level    Portrait Angle Selector

Related Questions and Answers

Q: 1. What plate and clamp do I use with the Monoball to attach it to my camera and tripod?

A: Since it has a clamp on top, all you would need is an Arca Swiss type camera plate for the bottom of your camera or a lens plate for the bottom of your lens, if it has a lens collar.

Q: 2. What is the position distance for a full turn of the knob on the Arca-Swiss Monoball X-Table System? Thanks.

A: When using the Arca-Swiss Monoball X-Table System. the position distance is 3.5 inches.

Q: 3. What tripod mounting plate is required to mount this system on a standard tripod head?

A: You need an Arca Swiss Z1 plate

Q: 4. On this MonoballFix version can you rotate the top clamp plate. If you can is there any alignment guide to help align the axis of the clamp exactly 0 0r 90 degrees from the rails?

A: The QR clamp on this system cannot be rotated.

Q: 5. Will it fit on fuji camera xt2?

A: This bracket is too small. We suggest another bracket as one that should fit right. Sorry, not guaranteed since we cannot test. Arca-Swiss L-Bracket B&H # ARVHLH. For further information, here is the link to the Mini L's web page. https://bit.ly/2LK63Fn

Q: 6. What is the height of the head when it is positioned for horizontal shooting?

A: The Arca-Swiss Monoball P1+ with ClicPan and Classic Receiver weights 1.3 lb / 585 g on horrizontal, or vertical position.

Q: 7. Will this fit on Fuji XT2 with or without battery grip?

A: While we cannot test this combination, we see no reason it will not work very well for that camera with or without the grip.

Q: 8. What does "monoball fix receiver" mean? Would be nice if the jargon was interpreted back to standard vocabulary.

A: The Arca-Swiss Monoball P1+ with Quick Set Pan and Monoball Fix Receiver uses a different type of Arca-Swiss plate than the standard one that most use. Here is a link to the standard Arca-Swiss plate option: https://bhpho.to/2Wpncv4.

Q: 9. what is the diameter of the top part? The circle the clamp its on

A: According to the manufacturer, the base that holds the quick release clamp on the Arca-Swiss Monoball P1+ would measure 2.95 inches.

Q: 10. What is the width of this rail? I have a Monoball P0 which can take a 32mm rail only. Is there a cheaper alternative that is 32mm wide that you can recommend?

A: The nodal set is for the PO head and is the width of that quick release system.So it should work fine on the head you have. For that head, Monoball P0 this is the only one we are aware of that will work.