The 10' Backline Series Twist Lock to Twist Lock Connector Speaker Cable from Gator is designed as a professional low-noise cable. It has a sturdy, straight twist lock connector on each end and features 16 AWG construction. The cable has a fine stranded oxygen-free conductor for high-quality signal transmission.

Straight Twist Lock Connectors    16 AWG Construction    Low Noise    Oxygen-Free Conductor

Related Questions and Answers

Q: 1. Is the 2”/1.25” model works in a nexstar 8se? Could I use an 2” eyepiece with this? Use a 2” eyepiece is better than an 1.25”?

A: Yes, its 100 % Compatible. Yes, it accepts both size eyepieces. A 2" eyepiece does offer more features over a smaller eyepiece.

Q: 2. Has anyone used this with the BMPCC4k? How does it work and how long can you get out of it?

A: Yes this product works with the pocket 6K. It connects to the camera via a D-tap cable (here is an example) Core SWX Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K & 6K (18 to 48") BH #COPTCBMPC4 • MFR #PTC-BMPC4 The amount of time depends on the capacity of the batteries that you put on them. for example if you use 2 small batteries like the Watson NP-F550 Lithium-Ion Battery Pack (7.4V, 2200mAh) B&H # WANPF550 MFR # B-4203 You should get around an hour and a half. Depending on the batteries you choose you can get significantly more time but the batteries will be bulkier and heavier (the Watson NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh) B&H # WANPF975 MFR # B-4206 should get you around 4 hours) You will also need a mount to put this on or near your camera. There are a number of options that work but they vary depending on how you set up your camera. if you have additional questions feel free to reach out to us via chat in the top right hand corner of the B&H website or via phone at 1-800-606-6969 ext 7207 for professional video and one of our specialists can assist you.

Q: 3. Can the 1.25" eyepiece adapter included be used with 2" filters? Will they fit? So we can use 2" filters with 1.25" eyepieces with this 2" diagonal and 1.25" adapter.

A: The 2 inch filters will fit onto the 2 inch eyepiece adapter ..

Q: 4. Will this hold Nanlite Pavotube II 30X?

A: Yes, the Kupo Twist-Lock Mounting Plate for Two lamps will support most led tubes on the market.

Q: 5. Can this product be attached to the NextStar 6 SE?

A: Yes, you can use the Dielectric Star diagonal 2" item # 93573. However, keep in mind that the opening of the Nexstar 6 is smaller than an 8 inch telescope and you will not get the full benefit of the 2" wide view.

Q: 6. Can this be used on a 150mm Maksutov?

A: Yes, the Celestron 90° Dielectric Star Diagonal with Twist-Lock (2"), features a 1.25 "reducer, and will fit on the eyepiece holder of the 150mm Maksutov telescope.

Q: 7. The specs say "D-Tap output: 14.8 VDC, 3.5A / 50W (max)"- so if I use this to power a 60w light (Godox ML60) I won't get full power?)

A: The power output only states a 13 to 14.8 volts at 6 amps. You will get the full power output for your light.

Q: 8. Can this product attach to the Sky-Watcher Evostar ED APO 72mm f/5.8 Refractor Guidescope?

A: The Celestron 90° Dielectric Star Diagonal with Twist-Lock (2") BH #CEDSDTL2 • MFR #93573 will attach to the Sky-Watcher Evostar ED APO 72mm f/5.8 Refractor Guidescope

Q: 9. What is the difference between Celestron 2 inch diagonal 93573 vs 93527?

A: The Celestron 90° Dielectric Star Diagonal with Twist-Lock (2") BH #CEDSDTL2 • MFR #93573 has a twist lock and also comes with a 1.25" adapter.

Q: 10. Does this handle fit the cage for the Sony A7S and enable you to move it out the way so that the xlr unit can be mounted also. Unlike the old movcam cage handle.

A: The twist handle is adjustable both by sliding the handle on the rail included or can be rotated which should allow room for accessories.