With four 6W laser diodes compressed to produce 22W of laser power, the Creality Falcon2 provides strong and fast engraving and cutting power for wood, metal, cardboard, bamboo, rubber, leather, fabric, acrylic, and plastic. Cut up to 15mm thick wood or 0.05mm stainless steel sheets with just one pass and apply color engravings to make ideas into reality. The working area is right around 15.75 x 16.3", or exactly 40 x 41.5cm.

Assembly requires only three main steps, and your workflow is supported by advanced features including integrated air assist, triple monitoring systems, and five safety precautions. The machine is compatible with software including LaserGRBL and LightBurn on Windows or Mac. The supported file formats are SVG, PNG, JPG, JPEG, BMP, and DXF. The engraving file format is G-code. The engraving speed is 25,000mm per minute, and the resolution is 254 dpi.

Cut 15mm Wood / 0.05mm Steel in One Pass    Cut Bamboo, Rubber, Leather & More    Apply Colorful Engravings    25,000mm/Minute Engraving Speed    Integrated Air Assist    Five Safety Protections    Triple Monitoring Systems    15.75 x 16.3" Working Area    254 dpi Resolution    Works with LaserGRBL/LightBurn Software

Based on the latest FAC spot compression technology, four 6W laser diodes are compressed to increase the laser power to 22W.

With 25,000mm per minute engraving speed, Falcon2 allows you to work about twice as fast as with the previous Falcon model from Creality.

Using a stepless knob, manually adjust the air assist, or have airflow automatically adjusted through the optional LightBurn software in order to remove smoke and protect the laser lens for cleaner results.

When stainless steel is heated by the powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life.

Insert a TF card and create anywhere, anytime.

Position and adjust precisely without connecting to a computer. Short-press to fine-tune by 1mm, and long-press to adjust by 10 mm/s.

The all-aluminum design provides you with a solid machine. An integrated sliding rail keeps motion highly synchronized, while the U-shaped, wear-resistant wheels ensure motion stability.

Bidirectional limit switch, active stop function, security lock, emergency stop button, and a laser protective cover.

Airflow monitoring, lens monitoring, and flame monitoring.

When a flame is detected, an indicator will flash red, and the machine will stop immediately.

Related Questions and Answers

Q: 1. How do you convert the controller for fiber use?

A: So you need to convert both the sdi signal and data signal to a fiber signal. I prefer using a Thor 1-Channel Mini HD-SDI Single-Mode Fiber Optic Extender Kit for each Marshall Camera, but that is just me. It mux’s both signals to one fiber and demux’s at the other end. Hope this helps. Good luck!

Q: 2. Does the cutter come with extra blades?

A: I believe it came with a couple of blades but it's best to have extra packs on hand. Cutting with a sharp blade insures very smooth professional looking cuts. Have fun, I did. Very well made product.

Q: 3. Is this the same unit that also has the laser that drops down to 22w for precision engraving? Also are these new or refurbished

A: Yes, the Creality Falcon2 40W Laser Engraver & Cutter can decrease the wattage to 22 watts for precision engraving. It is a new cutter that was never used before.

Q: 4. To be able to hit 7 cameras with the one XLR output, do you just passively split the signal, e.g. jumper a set of jacks on a patch panel together? Or how do you hit multiple?

A: This is a very specialized product. You may want to call up Marshall directly at (310) 333-0606 for assistance wiring it out.

Q: 5. Can I engrave a brick with this?

A: The Creality Falcon2 CV-50 22W Laser Engraver & Cutter cannot engrave a brick. You can engrave the following: Wood, Metal, Cardboard, Bamboo, Rubber, Leather, Fabric, Acrylic, and Plastic.

Q: 6. Can I use a whirlwind split 6 to get to 6 cameras?

A: Yes. NOTE: Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of the source and destinations in a particular application. It is not recommended that the SPLIT 6 be used to split a microphone level signal to more than two outputs. Attempting to do so may result in poor frequency response and reduced signal level. The SPLIT 6 may be used to split microphone level signals in most applications if this limit is observed.

Q: 7. Is this product electrical?

A: Yes, it is electrically powered and includes a foot switch.

Q: 8. Is this plastic or metal like the bevel cutter?

A: The Logan Graphic Products 701-1 Straight Cutter Elite is made with resin.

Q: 9. will this work in an epson p800 17x22 printer to clean the whole path?

A: The Microcare Solutions Laser & Inkjet Printer Cleaning Paper size is 8.5" x 11". Since that is the case, it will not clean the whole path of the Epson P800 that has a 17" width.

Q: 10. Is this the same floppy and fabric that comes in the Westcott C47 DP Kit?

A: Yes, the Scrim Jim Cine Floppy Cutter Fabric from Westcott is the same fabric as the C47.