Enjoy simple setup and lights-on projection with the Elite Screens FTE122H3-C4D Kestrel Tab-Tension 3 CLR 4D 59.8 x 106.3" Motorized Rising Projection Screen. The FTE122H3-C4D is a 16:9, 122" diagonal, motorized rising screen with Elite's ISF Certified, ambient-light-rejecting CineGrey 4D screen surface.

This electric floor-rising screen is housed in an elegant, black aluminum case that plugs into a standard 3-prong electrical outlet. There is no complicated installation needed, just plug and play. The CineGrey 4D surface is designed for standard-to-long throw projectors with a throw ratio greater than 1.4:1. The angular reflective material rejects up to 63% of ambient light and is ISF certified for color accuracy, ideal for environments with little or no control of indirect lighting such as family rooms, lecture halls, boardrooms, or training facilities. For your convenience, IR, RF, and 12V trigger controls are included.

122" Diagonal | 16:9 Aspect Ratio    CineGrey 4D ALR Screen Surface    1.1 Gain | 70° Viewing Angle    For Minimum 1.5:1 Throw Ratio Lenses    Up to 63% Ambient Light Rejection    ISF Certified for Color Accuracy    Black Aluminum Housing    Tab-Tensioned Design Keeps Images Flat    IR, RF & 12V Trigger Controls Included    Plug & Play Standard AC Power Cord

The CineGrey 4D is a 1.1 gain, flexible front-projection, ceiling-ambient light rejecting material for standard throw projectors. It can reject up to 63% of off-axis lighting while providing a bright, contrast-rich image in moderate light room environments. The CineGrey 4D produces outstanding images with a balanced color temperature for residential and commercial applications. The ambient light rejecting properties assist in maintaining picture clarity that does not wash out the image like typical matte white surfaces do under ambient light conditions.

To obtain ISF certification a projection screen must meet a list of essential ISF qualities such as accurate color fidelity, uniform spectral response, and black level performance.

• Not compatible with ultra-short and short-throw projectors
• Uses a multilayer matrix with reflective and absorbent micro-particles to eliminate 63% ambient light
• 4K/8K Ultra HD, HDR, and Active 3D compatible
• Moisture resistant black aluminum housing
• Rises and lowers using “scissor-backed” industry grade cross spring risers
• Tab-tensioned design to ensure a taut and flat ripple-free projection surface
• Includes Infrared (IR) and Radio Frequency (RF) handheld remote controls
• Wireless 12V trigger included
• Up/Stop/Down toggle switch for manual operation

Related Questions and Answers

Q: 1. What is the diameter of these pipes, please?

A: Measured with calipers, O.D. is 1.970 to 1.975 and I.D. is 1.85

Q: 2. How long will the background drop be

A: This cross pole can accommodate a 9 foot wide roll of seamless paper.

Q: 3. I saw on a video, these Ronin hand grips control a gimbal RS3 pro, are they compatible, I thought they were not?

A: Yes, They will work in conjunction and control the DJI RS3 Pro gimbal when you add them to the following DJI DJI Transmission Combo kit https://bhpho.to/3QQ5k73

Q: 4. Which grip controls which functions. Does not state anywhere here, nor on DJI's site. It appears the right side controls focus and two buttons, and the left has a joystick and a couple buttons?

A: The right controller has a focus knob, start/stop record, peaking toggle and mode switch. The left handle has an exposure assist button, an Activetrack button and a M button that will set the camera to sport mode. Both handles also have triggers on the front that will disable z axis and center your tracked subject in the frame.

Q: 5. How do I attach a vinyl seamless to the pole? Tape?

A: That's what I did. I used some acid-free clear packing tape, but gaffer tape might be better. Definitely not duct-tape.

Q: 6. Will this function with a Surface Pro7 (15 volt)? What adapter cord?

A: Yes, it will. It has a max power draw of up to 110V.

Q: 7. About the range, 1 answer says 20,000ft, another 20,000ft, which is it. How to get a long rand follow focus control with the handgrip controls, is it possible to use the DJI force pro?

A: The DJI Ronin 4D Handgrip Combo (B&H# DJR4DHGC) would be used with the DJI High-Bright Remote Monitor (B&H# DJHBRM) and it would be the built-in receiver (really a transceiver) in the DJI High-Bright Remote Monitor that would mainain communication at a distance of up to 20,000 ft. (6km) line of sight in ideal conditions.

Q: 8. Anyone knows what the accurate assembled length is? 9ft or 2.7m, because 9ft is 2.75m

A: The assembled length of this pole is 2.75m or 9 ft.

Q: 9. How to enable recenter trigger while using with dji transmission and rs3

A: When using the DJI Ronin 4D Handgrip Combo with the DJI Wireless Video Transmitter and the RS 3, you can recenter the gimbal by double pressing the trigger on the left or right hand grip. Here are the other control functions of the Handgrips when paired with the RS 3: (1) Joystick: Control the gimbal rotation. (2) M button: Press and hold the M button to enter Sport mode, and release it to exit. (3) Dial: Control the pulling focus electronically / zoom control, focus motor, camera parameters, and other functions. (4) Record button: Press once to start / stop video recording; and press and hold to trigger photo capturing. (5) AF button: Press once to trigger the auto focus function. (6) The control of EXP button, Active Track button, Mode button, and Focus Peak button is not supported.

Q: 10. Will TSA allow this power unit to fly on commercial airliners?

A: TSA regulations and even airlines regulations change all the time. Currently If the rated power is less than 100Wh, power banks can be carried without approval; power banks with the power between 100Wh and 160Wh can be carried after approval of air carrier.