The beige CR-8S Cardioid Earworn Microphone from Point Source Audio is designed for high noise applications where more than one microphone is required such as for live performances and recordings. The cardioid pattern of the microphone will pick up sound from one direction, so it can be focused on the sounds of the person wearing the microphone. The unit features a 4mm diameter microphone element that can be positioned at the corner of the mouth to maintain an unobtrusive appearance.

The microphone features an unbreakable boom that can bend up to 360° and a flexible earhook that can be worn on either the left or the right ear. Alternatively you can utilize a dual-earset microphone clip to convert the earworn microphone so it can be worn on both ears for more support. The unit offers optimal gain amplification before feedback and can handle sounds with a maximum SPL of 135 dB. The microphone can connect to a wide range of wireless microphone transmitters using its interchangeable X-Connector system. This particular unit comes with an interchangeable 3-pin mini-connector for AKG transmitters. The microphone also comes with a foam windscreen, a body clip, and a storage box.

Focused Cardioid Polar Pattern    4mm Diameter Microphone Element    135 dB Maximum SPL    Unbreakable 360° Bendable Boom    Left or Right Ear Fit    Convertible to Earset    Interchangeable X-Connector System    Unobtrusive Appearance

Related Questions and Answers

Q: 1. Will this work with the 3 or 4 pin connector or 3.5mm?

A: Hi Mark! This mic model EO-8WL-XAT-BE has an interchangeable X-Connector compatible with the Audio-Technica (XAT) wireless system. If you wish to switch out to other wireless brands, you simply swap out for another X-Connector which can be purchased separately. For example, XSH (for Shure) or XSE (for Sennheiser.)

Q: 2. What environment would the high sensitivity be best for over low sensitivity?

A: A microphone with high sensitivity is best for capturing a quiet voice while a mic with low sensitivity is best for a loud voice.

Q: 3. Will this adapter allow me to connect a PS Embrace mic to a Sennheiser XSW transmitter?

A: No, that would not be possible. To be able to do that with a Point Source Embrace model, you would only need the one that is made for compatible with Sennheiser Evolution series transmitters like B&H # POEO8WLXSEBE for example.

Q: 4. If I have a set of custom in ear headphones can I use these with this headset/talkback mic for live productions?

A: The Point Source Audio CM-i3-5Ms is modular and ships with their EM-3 in-ears, but can be switched with earphones of the user's choice.

Q: 5. Will this headset work on the Sony packs?

A: If it doesn't say your brand, then I wouldn't buy it. This one is made for Sennheiser.

Q: 6. I want to use my Sennheiser mics on my zoom N1. Because of the threaded collar, it doesn't fit perfectly into my Zoom N1. Does this cable convert the Sennheiser connector to a regular 3.5mm plug?

A: This adapter is specifically for Point Source mics to connect into Sennheiser wireless bodypack transmitters.

Q: 7. Why I hear only blowing and breathing but no speech? It doesn't make any other sound.

A: I see that Point Source Audio's technical support team has already received your request for assistance and will be contacting you directly. If you do need to reach Point Source Audio by phone their number is 415-226-1122. Please let us know if you require further assistance.

Q: 8. Does this mic require any phantom power please?

A: This mic is designed with a connector for Sennheiser wireless transmitters, it does not require phantom power but does require voltage to operate 1 -10v which is provided by the transmitter.

Q: 9. is this article compatible with the RODE WIRLESS GOII?

A: The Point Source Audio CO-3 Earworn Omnidirectional Microphone with Locking 3.5mm Connector for Sennheiser Transmitters (Beige) is not compatible with the RODE Wireless GO II.

Q: 10. will this work with a countryman mic??

A: It took me a while to find our old E6 to try. Yes, this headset will hold the countryman in place. The microphone is a bit looser a fit than the Point Source that it is made for and i didn't do exhaustive testing but it seems to me like it would hold up through a production. i took a picture but i don't see a way to attach it.