Designed to convert between two gigabit SFP modules, the MC230L Gigabit SFP to SFP Fiber Media Converter from TP-Link extends the distance of an existing gigabit network via fiber optic when integrated with an SFP module. It converts an optical light signal between different SFP modules, like multi-mode and single-mode modules. This device supports 802.3z network standard and comes equipped with an external power adapter.

Converts between Two SFP Modules    Two Gigabit SFP Slots    Complies with IEEE 802.3z    LED Indicators for Status    External Power Adapter Included

Suitable for network connections across multiple buildings, for remote surveillance, and automated factory equipment

Converts optical light signal between different SFP modules, such as multi-mode and single-mode SFP modules

Maximum transmission distance depends on the inserted SFP modules

LED indicators for monitoring network activity

Supports hot swapping

Flexible installation on standalone desktops or inserted into a compatible TP-Link chassis (available separately)

Related Questions and Answers

Q: 1. Does it have a Embedded Omada SDN Controller as does the ER7212PC?

A: The TP-Link ER7206 Omada Gigabit VPN Router supports Omada SDN, but it does not have a built-in Omada controller.

Q: 2. What’s the latency?

A: Generally, the expected latency of the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would be about 2 frames, but if the signals are gen-locked, the latency would then decrease to just a few lines of resolution.

Q: 3. Is it possible to use SFP to RJ45 adapter module with this unit?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP should be compatible with most copper SFP to 10G RJ45 adapters.

Q: 4. What's the maximum length the cat6 cable will be able to run?

A: When using the Blackmagic Design 2110 IP Mini BiDirect 12G Converter along with Cat 6A cable, you can do a run of approximately 100 meters.

Q: 5. Can this converter perform the same functions as the Blackmagic Design Studio Converter (just for 8 cameras instead of one) ?

A: No, the Blackmagic Design 2110 IP Converter 8x12G SFP does not sever exactly the same purpose as the Blackmagic Design Studio Converter (BH #BLSCN). The Blackmagic Design Studio Converter can intake a signal via 10G Ethernet, which provides power and tally/coms support, where as the Blackmagic Design 2110 IP Converter 8x12G SFP is a signal convertor for sending 8 camera feed over longer distances, so the inputs are SDI can the SFP ports are for transmission to a receiver.

Q: 6. Is the TP-Link Powerline adapter 120-240v 50-60 Hz?

A: The TP-Link AV1000 Gigabit Powerline Starter Kit, B&H # TPTLPA7017K, is dual voltage (100-240V 50/60Hz).

Q: 7. What is the throughput speed from WAN to LAN, no VPN, Just firewall?

A: The TP-Link ER7206 is a Gigabit VPN Router with a throughput of 291.6 Mb/s IPsec VPN. It has a Integrated SPI Firewall.

Q: 8. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 9. Can I connect this black magic box to an SMPTE 2110 network switch and output SDI video from it?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP has eight SMPTE-2110 SFP IP fiber ports for ingesting SMPTE 2110 signals and will then convert the signal so that it can be output as SDI.

Q: 10. I would like to ask about the version number "v1.0" , "v1.60"of this product

A: The TP-Link ER7206 Omada Gigabit VPN Router would be supplied with the newest firmware ER7206(UN)_V1.6_1.2.1 Build 20220512.