The 77mm Kase KW Revolution Mega Set features six filters from Kase's color-coded KW Revolution magnetic filter system. You get ND8, ND64, ND1000, CPL, neutral night, and R.MCUV filters, designed with color-coded filter frames for easy identification and swapping. The ND8 is color-coded blue, the ND64 is yellow, the ND1000 is red, the CPL is silver, the neutral night filter is green, and the R.MCUV filter is black. The kit also includes adapter rings, a filter case, and one front lens cap. The KW Revolution system is based on Kase's earlier Wolverine series and is fully backwards-compatible with Wolverine filters.

KW Revolution filters are made with shock-resistant and water-resistant optical glass that's durable and easy to clean, and that doesn't cause any color cast. In addition to being magnetic, the filters are also front-threaded (except the R.MCUV filter). This is one of the differences between the KW Revolution series and the earlier Wolverine series.

This kit includes both the standard magnetic adapter and the inlaid magnetic adapter supported by the KW Revolution series. The standard one screws onto your lens and lets you magnetically attach the filter to it. But the inlaid adapter works a bit differently. It secures to your lens in a very recessed way. It screws onto the front filter threads very close to the front lens element and nearly hidden within the filter thread area. It hardly leaves any space between the lens and filter. This results in minimized vignetting with wide angle lenses when you attach the filter. The filter snaps onto the adapter magnetically. Up to four filters can be stacked in total, both from this KW Revolution series and from the earlier Wolverine series, and the filters can be freely rotated. Please see more about the inlaid adapter below.

Color-Coded Magnetic Filters    ND8, ND64, ND1000, and CPL Filters    Neutral Night and R.MCUV Filters    Filter Case and Front Lens Cap    Standard and Inlaid Magnetic Adapters    Stackable    Front Threaded    Compatible with Kase Wolverine Filters    Shock-Resistant Glass    No Color Cast

When your KW Revolution filter (or backwards-compatible Wolverine filter) is removed from the inlaid adapter, you can leave the adapter on the lens. It will not interfere with attaching the original lens cap to the front of your lens. Similarly, it won't interfere with screwing in regular screw-in filters to the filter threads of the lens.

Besides securing directly to the lens, the inlaid adapter can instead be screwed onto the front threads of regular screw-in filters. The screw-in filter can then be screwed onto your lens, and the inlaid adapter will be on the front of that filter. You can then magnetically attach KW Revolution and Wolverine filters onto the adapter. The benefit of this flexibility is that it allows you to mount the KW Revolution filters on top of regular screw-in filters that you may want at the bottom of your stack.

The inlaid adapter is not compatible with step rings.

There are a few ways to screw in the ultra-slim inlaid adapter. The main way is to first attach it magnetically to one of the included ND filters, and to then screw in both by hand. Then you can remove the filter or stack additional ones onto it. You can also attach the optional Kase magnetic lens hood.

Related Questions and Answers

Q: 1. Will this fit the 2.0 version?

A: No, the Intellytech Pancake Lantern and Skirt Set for Mega-8 LiteCloth 3.0 is not compatible on the1.0 & 2.0 Mega-LC.

Q: 2. does it work on the GFX50s mark ii?

A: Yes, the Kase 3-in-1 (ND8, ND64, ND1000) Clip-in Filter Set for FUJIFILM GFX 50R/50S/100/100S Mirrorless Camera listed above would also be compatible for use with the new FUJIFILM GFX 50S II Medium Format Mirrorless Camera.

Q: 3. Are these clip in filters compatible with the Z-9?

A: Unfortunately, as far as we are aware, Kase specifies these as only being compatible with the Nikon Z6/Z7 (I and II) and the Nikon Z5.

Q: 4. Can I use a regular step-up ring to attach this to a 77mm lens?

A: Yes, you can use a standard step up ring from 77 to 82, then attach the adapter ring that comes with the Kase KW Revolution Professional ND Kit (82mm) and then you will be able to attach the magnetic filters.

Q: 5. Are these stackable?

A: No, these are not stackable.

Q: 6. What stud should I use for this boom?

A: The Avenger E200 Stand Adapter B&H # AVE200 would fit on the end of the boom in the junior receiver and will terminate into a baby pin for mounting most lights.

Q: 7. Can I use this adapters with the Zip Box Pro?

A: They do not connect directly to the Zip Box Pro. If you have a smaller lens, you can use this; https://www.bhphotovideo.com/c/product/1449056-REG/wooden_camera_267500_wooden_camera_zip.html

Q: 8. Is there a bag that can fit this? I'd like a padded bag that would fit this for transport

A: I run a rental house in ABQ and after a lengthy search I never came across a bag that could fit the Mega Boom. Even looked at snowboard and ski bags/cases but all were just too short. Ended up having ProCases custom make a case for us out of ABS plastic w/ foam cutout inside. Significantly cheaper then a Pelican custom. Could always just keep wrapping it in a furni pad, but no style points if trying to impress clients. Best of luck hunting

Q: 9. Will these fit a X-T20?

A: The Kase 3-in-1 ND Set for Select FUJIFILM X Camera Bodies (ND8/ND64/ND1000) does not fit the Fuji XT-20 camera.

Q: 10. Has anyone used this boom with a parabolic reflector with off-axis weight offset, such as a Para 88/133?

A: The boom is capable but you will need to make sure it is counterbalanced and the stand is both strong enough and weighted.