The beige Series8 Omnidirectional Waterproof Headset Microphone from Point Source Audio is a dual-ear headset microphone which provides pristine sound quality with a secure and comfortable fit for applications such as vocal performances, recordings, and speeches in worship facilities, on stages, and more.

This omnidirectional microphone delivers 136 dB maximum SPL with a 20 Hz to 20 kHz frequency response and high-gain before feedback, making it well suited for use in low- to moderate-noise environments. It is mounted on a flexible boom which bends up to 360° and allows the miniaturized capsule to sit comfortably at the corner of the mouth for an unobtrusive appearance.

This Series 8 mic boasts an IP57 waterproof rating and is protected against water, sweat, and makeup. Its reversible design lets you choose between left or right ear placement, while the hooks conveniently fold flat for easy storage and safe transportation.

This headset comes with an XAK interchangeable TA3F X-Connector for AKG transmitters. A windscreen, clothing clip, and storage box are also included.

TA3F X-Connector    For Vocal Performance and Speech    20 Hz to 20 kHz Frequency Response    136 dB Maximum SPL    IP57 Waterproof Rating    High Gain Before Feedback    Bendable Boom up to 360°    Reversible Left or Right Ear Placement    Windscreen, Clothing Clip, Storage Box

Includes XAK interchangeable TA3F X-Connector for AKG transmitters

Omnidirectional pattern provides a natural vocal sound and is well suited for low- to moderate-noise environments

IP57 waterproof rating: Microphone is protected against water, sweat, and makeup

High gain before feedback and 136 dB maximum SPL for distortion-free live performance, recordings, and speeches

Dual-ear headset with reversible left- or right-ear wearing

Boom bends up to 360° and miniaturized capsule allows microphone to sit comfortably at the corner of the mouth for unobtrusive appearance

Headset ear hooks fold flat for easy storage and safe transportation

Includes windscreen, clothing clip, storage box

Related Questions and Answers

Q: 1. I would like to use this headset with Telex and Clear-com systems. Which headset and adapters should I get? Tks

A: The CM-i3 is available wired for TELEX or Clearcom systems. Please see the following link: http://bhpho.to/2fyyJS4 There is currently no adapter available from Telex to Clearcom. Adapters available can be found here. http://bhpho.to/2gD6ciS

Q: 2. Will this work with the pdwm8900?

A: The TA4F connector attached to the Pyle Pro PMHMS20 is not compatible with the beltpacks supplied with the PDWM8900 system which require a 3.5mm jack.

Q: 3. Can this mic be used interchangeably with various transmitter brands?

A: Yes, it can! Each mic comes with one X-Connector. Additional X-Connectors for other wireless brands can be purchased separately.

Q: 4. Does it work with Shure BLX1 Bodypack?

A: Hi, Thank you for reaching out. It depend on the plug that you have in your receiver.

Q: 5. Does this PMHM2 works with PDWM8900 or similar system?

A: Yes the Pyle Pro PMHM2 will work with the Pyle Pro PDWM8900. They both have 3.5mm and connectors.

Q: 6. is this compatible with Mipro Act-7ta?

A: Although we are unable to test to fully confirm, the Pyle Pro PMHMS20 Omnidirectional Headset Microphone for Shure Wireless Transmitters uses the appropriate TA4F connection for use with the MiPro ACT-7Ta Wideband UHF Bodypack Transmitter and has a good chance of compatibility with this wireless system.

Q: 7. does this mic require phantom power? or "bias power?" thanks!

A: Because the Point Source Audio CM-i3-PH Intercom Headset with 3.5mm Plug is designed for use with iOS intercom applications, we can presume that if power is needed, it is powered via a small amount of voltage received through connection to an iOS device. This is typically between 2-5V and often referred to as "plug-in" power. The power specifications for the CM-i3-PH are not specified, and the microphone element is actually categorized as dyamic/self-powered, which may indicate that it does not require any power from its source connection.

Q: 8. Just purchased the PMHMS20 headset mic. Have been unable to use so far due to the fact of the 4 pin mini-xlr. What adapter do I need to purchase to make this mic compatible w/ standard XLR?

A: You need the Laird Digital Cinema Premium 3-Pin Standard XLR Male to TA3M 3-Pin Mini XLR Male Audio Adapter B&H # LARD1XMTA3M MFR # RD1-XMTA3M which B&H has for under $5, and the device you plug into needs phantom power

Q: 9. What bodypack systems is the 3.5 mm ts compatible with?

A: The Pyle Pro PMHM2 Omnidirectional Headset Microphone can be used with any wireless bodypack transmitter that has a standard non-locking 3.5mm mic input such as the RODE Wireless GO II Compact Digital Wireless Microphone System/Recorder, the DJI Mic Compact Digital Wireless Microphone System/Recorder, the Saramonic Blink 500 Digital Camera-Mount Wireless Microphone System, and the Synco WAir Ultracompact Digital Wireless Microphone System, to name just a few. The PMHM2 can also be used with other devices that have a 3.5mm mic input including audio recorders, tablets, and computers.

Q: 10. Does this work with the Riedel Bolero Wireless Intercom?

A: Yes, the Point Source Audio CM-i3-4F Intercom Headset with XLR-4F Connector is compatible with the Riedel Bolero Wireless Intercom.