This TRS344 Pro-Stix Carbon Fiber Tripod with Compact Top Plate from ProMediaGear supports up to 60 lb, measures 20.8" when folded, and includes a tripod top plate with a 3/8"-16 mount. Each of its 4-section legs has a maximum diameter of 1.3". They also feature an independent spread, a 3-position angle lock, quarter-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 3.8" to a maximum height of 59". For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike that can be fastened to the bottom of its corresponding foot. A separately available leveling base and bowl can be installed on the TRS344 and oriented without using the tripod's legs.

Load Capacity: 60 lb    Max Height: 59.3", Min Height: 3.8"    Folded Length: 20.8"    Leg Sections: 4, Weight: 4 lb    Carbon Fiber Legs, 1/4-Turn Twist Locks    Rubber Feet with Stow-Away Metal Spikes    Bubble Level, Top Plate    Compact Aluminum Alloy Apex    Three 1/4"-20 Female Accessory Threads    Six Anti-Twist Pin Slots

Related Questions and Answers

Q: 1. Is it difficult to tighten this to the video head? There are no locking screws like those used on the Manfrotto model.

A: No, simply turn the lever clockwise and your video head will lock.

Q: 2. Does this tripod come with a hook underneath the baseplate?

A: Yes. There is a hook on the underside of the Top Plate.

Q: 3. What is the diameter of the base where a head attaches?

A: The diameter of the base plate on the TR424L is about 2.9 inches.

Q: 4. How do I reverse the 1/4 to 3/8 inch stud?

A: A bushing is needed to be put in place. Please review the following item. Sunwayfoto Stainless Steel 1/4" to 3/8" Tripod Adapter/Bushing (Set of 5) BH #SUTN1X5 • MFR #TN-1X5 https://bhpho.to/3qYKec5

Q: 5. What is the weight without the center columns, mini legs, and carrying case?

A: The weight of just the Novoflex TRIOMC2844 Tripod-M Compact Carbon Fiber 4-Section Tripod without the center column and accessories is 3.05 lb.

Q: 6. Can the foot become unscrewed from this monopod? I own a top rated monopod fromEurope and have had to replace the foot, because it is lost during use.

A: Yes the foot is removable for access to the spike. It would unscrew in order to remove it.

Q: 7. Is this compatible with the Nicky tripod byb3 Legged Thing? Thanks!

A: The 3 Legged Thing Legends Nicky 4-Section Carbon Fiber Hybrid Video/Photo Tripod is compatible with the ProMediaGear Pro-Stix 75mm Half Ball, when configured to receive a 75mm bowl adapter (not flat base adapter).

Q: 8. At full length the tripod is 59.3". What is the height of this tripod with the lower-most section of legs NOT deployed?

A: That height would be 44.75 inches. Each section is approx 15 inches. Best regards Tom Promediagear.com

Q: 9. Will this work on Gitzo systematic Series GT4542LS tripods?

A: The ProMediaGear 75mm to 100mm Bowl Adapter for Pro-Stix Tripods may work with the Gitzo Series 4 Systematic Carbon Fiber Tripod (Long), however we have not tested the combination and can not confirm if it would work or not.

Q: 10. Can I use this 100 to 75mm adaptor on any 100mm bowl?

A: The TRB75 adapter is specifically designed to insert into the ProMediaGear Pro-Stix 42 Series Carbon Fiber Tripod and allow you to use a 75mm or 100mm Bowl. The 100mm bowl will sit a bit higher in the adapter on the top ridgeline. Any 100mm bowl should work with this adapter as well as any 75mm bowl. A 75mm bowl will fit into the dish lower than the 100mm.