Point Source Audio Series8 Omnidirectional Earworn Microphone With Ta3f Connector For Akg Transmitters
- Product Code: ga12836
-
The black Point Source Audio Series8 Omnidirectional Earworn Microphone with TA3F Connector for AKG Transmitters is designed for live sound reinforcement applications where ambient noise is low to moderate such as for concerts, plays, and public speaking. The microphone fits over either the subject's left or right ear and features a 360° bendable and unbreakable boom with an omnidirectional back electret microphone element. The IP57 waterproof rating helps prevent moisture, sweat, or makeup from interfering with the sound.
The microphone can handle a maximum SPL of 136 dB and offers a full-range frequency response of 20 to 20,000 Hz. The unit comes with a windscreen, clothing clip, storage box, 4' cable, and an interchangeable 3-pin mini connector for AKG systems.
Reversible Left or Right Ear Placement 360° Bendable & Unbreakable Boom IP57 Waterproof Protection Back Electret Condenser Capsule 20 to 20,000 Hz Frequency Response 136 dB Maximum SPL Interchangeable X-Connector System Includes Windscreen and Clothing Clip Includes Storage Box
Key Specs | |
---|---|
Polar Pattern | Omnidirectional |
Power Sources | Plug-In Power |
Color | Black |
Microphone | |
Polar Pattern | Omnidirectional |
Included Tone/Pattern Caps | No |
Performance | |
Frequency Response | 20 Hz to 20 kHz |
Maximum SPL | 136 dB |
Sensitivity | -43 dB |
Dynamic Range | 104 dB |
Connectivity | |
Analog Output | 1x TA3F/Mini-XLR 3-Pin Female |
Cable Length | 4' / 1.2 m |
Power | |
Power Sources | Plug-In Power |
Operating Voltage | 1 to 10 V (Plug-In Power) |
Physical | |
Color | Black |
Environmental Resistance | Dust/Water-Resistant (IP57) |
Weight | 0.6 oz / 17 g |
Packaging Info | |
Package Weight | 0.5 lb |
Box Dimensions (LxWxH) | 9 x 6 x 1" |
Related Questions and Answers
Q: 1. How long is the cord that attaches to the mic?
A: The four included cables for the Samson LM8x Omnidirectional Lavalier Microphone are each 3.9 feet long.
Q: 2. Does this microphone fits the PDWM4400 transmitter? One of the headset microphone comes with the PDWM4400 did not work. If it does not work, can you suggest one similar to this headworn microphone for PDWM4400 transmitter?
A: Yes the Pyle Pro PMHM2 will work with the Pyle Pro PDWM 4400.
Q: 3. Will the Countryman EMW mics work with Saramonic UMW Mic9 transmitters?
A: As long as the mic is wired for a Sennheiser wiring, it should work with the Saramonic system.
Q: 4. will this work with the zoom f1 without plug in power?
A: This will not work. The Zoom F1 requires a mini locking connection that has been wired the same way as a Sennheiser lavalier. This Countryman EMW will work for the Zoom F1. B&H # COMEMWFBSR .
Q: 5. Will this work with the Roland r-07?
A: The Countryman EMW Omnidirectional Lavalier Microphone for Digital Recorders will work with the Roland R-07 digital recorder. Be sure to turn on the "plug in power" in the menu of the R-07, to send voltage to the microphone.
Q: 6. Can I plug this mic into a regular audio interface Mic Pre?
A: Greetings: I am researching this question myself. First of all, there are a few microphones from Shure and Audio Technica that are made to directly plug in ot XLR fittings that go into a mixer board. The unit that is by Pyle most likely will require phantom power to work, since wireless body paks provide about 9 volts for energizing the microphone. A possible risk point with a direct connection is that phantom power typically is 48 volts, far beyond the scope of what this microphone is usually fed with. This is an involved subject,
Q: 7. what is the length of the cable?
A: Great mic, but really short cable length. Which I didn't even think to check before buying. Maybe 2 or 2.5 feet? Definitely get a longer XLR cord to go with it.
Q: 8. Is this clip compatible with Sony E-44B microphones?
A: The Point Source Audio Double Holder Slider Clip can be used with most lavalier microphones, including the Sony ECM-44B.
Q: 9. For the Countryman EMW 4-pin hirose connector will this work with the T1001 bodypack or System 10 Pro Lav's? Thanks, Paul
A: Yes. The T1001 transmitter is a 4-pin locking connector.
Q: 10. will this work with a countryman mic??
A: It took me a while to find our old E6 to try. Yes, this headset will hold the countryman in place. The microphone is a bit looser a fit than the Point Source that it is made for and i didn't do exhaustive testing but it seems to me like it would hold up through a production. i took a picture but i don't see a way to attach it.
Top Bestselling Products
Akg P120 Cardioid Condenser Microphone (black)
$297.00 $469.26
Countryman Isomax 2 All Purpose Microphone
$975.00 $1,257.75
Countryman Isomax 2 All Purpose Microphone
$1,044.00 $1,409.40
Countryman Isomax 2 All Purpose Microphone
$752.67 $1,053.74
Products You May Like
Matthews Medium Noga Articulating Arm
$434.85 $613.14
Freewell Long Exposure Filter Kit For Dji Mavic Air 2 (4-pack)
$209.97 $298.16
Canson Infinity Baryta Photographique Ii (44" X 50' Roll)
$839.97 $1,184.36
Hahnemuhle Photo Rag Baryta Glossy Fineart Paper (64" X 39' Roll)
$1,813.80 $2,448.63
Ricoh 3-year Basic Service With 24x7 Response For Fi-7600
$19,185.00 $28,393.80
Smart-avi 4-port Quad Displayport-hdmi Kvm Switch With Usb 2.0 And Audio
$3,165.00 $4,367.70
Tilta Cage Top Adapter For Sony Xlr-k1m/xlr-k2m
$149.85 $188.81
Angler 40° Grid For 33" Quick-open Beauty Dish
$179.85 $278.77
Red Digital Cinema Red Evf Mount
$3,750.00 $5,662.50
Theatrixx Technologies Hdmi To Sdi Video Converter
$1,635.00 $2,616.00
Ergotron Workfit-a Dual-display Workstation With Work Surface
$2,055.00 $3,288.00
Canare Male To Right Angle Male Hd-sdi Video Cable (blue, 200')
$749.85 $1,177.26