This 1 to 5-stop, 67mm Nano-X Pro Series Filter from K&F Concept can increase the density of the entire image area from 1 to 5 stops. Increasing neutral density offers finer control in available shutter speeds or aperture settings for both still and video applications. Using a longer shutter speed makes it possible to increase motion blur to convey a sense of movement, or to dial in a video camera frame rate. Increased density also makes it possible to shoot using wider lens apertures, helping to isolate a subject from the background.

0.3 to 1.5 Optical Density    Double-Sided 36-Layer Nano-Coating    Ultra-Thin Brass Frame    Reduces Flare and Ghosting

The frame is made of brass material.

With an ultra-thin design, 0.01mm-level machining accuracy, the frame is highly fitted and fixed to the lens, and there is no vignetting when installed on the wide-angle and telephoto lenses.

CNC one-piece molding combines hardness and flexibility for smooth installation and durability.

Equipped with genuine leather material is a pure handmade storage bag specially designed for photographers.

Super waterproofing, anti-fouling, and anti-scratching all provide excellent durability for your filter.

The lens adopts K&F Concept's coating technology, and the reflectivity as low as 0.15% ensures ultra-high light transmittance. It reduces flare and ghosting that can occur when filters are attached to the lens with little or no impact on the original performance of the lens.

Related Questions and Answers

Q: 1. Will this fit the voilander 40mm 1.2

A: It will not. The Voigtlander Nokton 40mm f/1.2 has a 58mm thread. Instead you would need B&H # BWUVXSP58. https://bhpho.to/2MbwZTx

Q: 2. What's the difference between the 007 version and the 010 version?

A: The difference between the B+W 67mm XS-Pro Clear MRC-Nano 007 Filter (B&H # BWCXSP67) and the B+W 67mm XS-Pro UV Haze MRC-Nano 010M Filter (B&H # BWUVXSP67) is the Clear MRC-Nano 007 Filter is a completely clear filter that has no filtration whatsoever, and is used simply for its protection properties and ease of cleaning. The UV Haze MRC-Nano 010M Filter may also be used for protection and cleaning needs, but in addition to the above, it is also designed to absorb/block ultraviolet light, which reduces the bluish cast of daylight, and reduces atmospheric haze. . In bright daylight, near bodies of water or snow, in high atmospheres, and in some urban situations, a UV haze filter may also assist in cutting through atmospheric haze to assist you in obtaining a higher quality image. In regards to urban situations, ALL haze may not be eliminated as some urban haze is due to smog and/or air pollution, and not due primarily to UV reflection.​ Other than one being clear and one having UV haze filtration, the filter size and the brass filter ring would be identical. Both use high-quality Schott glass for increased optical clarity and color fidelity and have a thin brass ring designed to reduce/eliminate vignetting on full-frame lenses up to 24mm wide, or on APS-C sensor lenses up to 18mm wide, or on Micro Four Thirds lenses up to 12mm wide

Q: 3. Can you use this filter with the Leica Q lens hood?

A: Yes

Q: 4. This lists the filter as a 010M, but the photo f the filters shows 010. What is the difference?

A: 010M and 010 MRC Nano is the same thing. M stands for multi coating. The filter ring spells it out, instead of having the M after 010. No difference, means the same thing.

Q: 5. Hi! should it work with the sony s7c camera? i accidently ordered the one with the trs on both sides :(

A: The Tilta Nucleus-Nano Run/Stop Cable for Sony a6, a7, and a9 Series Cameras is not compatible with the Sony a7C Mirrorless Camera, because the camera utilizes USB-C, not micro USB.

Q: 6. i know all VNDs respond differently, but wondering if able to stack CPL on top of this lens and still get suitable shot?

A: The K&F Concept Nano-X Series VND Filter Kit with Green Coating for DJI Osmo Pocket 3 is not available for stacking.

Q: 7. How long is this cable?

A: 17" / 43.2 cm

Q: 8. Is there an option that works with A7S III?? Cheers

A: Yes, this should work with the Sony A7SIII as well.

Q: 9. Will this work with the Sony a5100?

A: Tilta only lists compatible with a6, 7 and 9 camera, We can't guarantee it would.

Q: 10. Will this fit a zeiss Otus 85mm f/1.4? the Otus has 86mm front filter thread.

A: Yes this should fit perfectly.A very appropriate choice for such a lens!Colin