The Dual XLR Male to TA5M Female Audio Cable from DigitalFoto Solution Limited is designed to work with the Zaxcom QRX200. The 3.2' long cable features two 3-pin XLR male right-angle connectors on one end and a TA5F Mini XLR female connector on the other.

For Zaxcom QRX200    Cable Length: 3.2'    2 x XLR Male Right-Angle Connectors    1 x TA5F Mini XLR Female Connector

Related Questions and Answers

Q: 1. What is the difference between the KA 600i and KA 600 cable?

A: KA-600i has a TRRS connector for smartphones and tablets. KA-600 has a TRS connector for DSLR cameras, camcorders and audio recorders.

Q: 2. Would this work with a cellphone connected to a 3 pin port on a racing headset ? Thanks

A: This is specifically designed for compatibility with Sennheiser products. We cannot predict how other products will behave.

Q: 3. Does it fit this K&F filter https://www.bhphotovideo.com/c/product/1536341-REG/ ? And if not is there one that does fit?

A: Yes, 100 mm equals 3.937 inches the unit will adapt to the following sizes 4 x 4" or 4 x 5.65" Filter

Q: 4. The overview says, "This allows you to play back your computer's audio over your home audio system," but few (if any) stereos have a "mic input," they are all line-level inputs (from CD player, tuner, tape, home theater processor, etc.). Does output from the LSP-1 need to go through a microphone preamp before connecting to a home stereo system? Thank you for your help!

A: This unit is designed to allow you to connect any audio source with a line level, 3.5mm jack style, output to a mic preamp on a mixer. The output must be connected to a mic preamp to playback at a listenable level.

Q: 5. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.

Q: 6. Is the end of each arm a nato rail / the same as the DJI RS cold shoe?

A: The only mounting points on the DigitalFoto Solution Limited Dual Z-Axis Spring Handles & Tethered Control Adapter for DJI RS 2/3/3 Pro are the two 1/4 20 female screw points at the top of each handle. Unfortunately, there are no NATO rail mounts on the handle.

Q: 7. Hi! I would like to use this with an AVX microport receiver connected to an iPhone (acting as recorder). This haven't worked so far. The AVX puts out the max four bar level. What is the problem?

A: This adapter works with every iPod I have going back to one made in 2008. Audio levels are consistently good. I'll bump up the audio in post production at times. Use a dynamic with a hotter output (I use a Shure SM 63 or VP 64) to get higher input levels on your recordings.

Q: 8. Does this have a 1/4-20 thread on the bottom to attach to a tripod?

A: Yes, it has a 1/4 inch female thread on the bottom. This allows you to attach it to most tripods with a head.

Q: 9. Will this give the proper output level from a mixing console line level aux output to an iOS input?

A: The Sennheiser KA600i is not designed to connect line level devices to a smartphone. A hardware interface would be recommended for this application.

Q: 10. Can someone confirm that this cable splits the right channel and the left channel? I'm thinking it might go well with the Deity Microphone V-Mic D4 duo on and ENG type camera such as the Sony FS5.

A: Yes. This cable will split the left and right on the 3.5mm to seperate male XLR conectors.