Power up to four devices from a single D-Tap power source with the D-Tap 2-Pin Male to Hirose 4-Pin Female Clip-On Power Cable from Hawk-Woods. A male D-Tap connector at one end brings power through the 5.9" cable that connects to a clip-on power hub with two female Hirose and two female D-Tap connectors at the other end. The power cable is ideal for clipping onto a 15mm rod to facilitate powering devices and accessories on any professional camera rigging system.

1 x D-Tap to 2 x Hirose & 2 x D-Tap    Cable Length: 5.9"    Ideal for Clipping onto 15mm Rods

Related Questions and Answers

Q: 1. Will this work with Omni Sony UWP-D16?

A: The Sony lav would be too big for this clip. Here's a universal vampire clip option BH #POVCLIPBL.

Q: 2. Does this one works with Atomos Ninja V?

A: As per the manufacture. Since it is a 2.1mm connection, it should work.

Q: 3. Is this pin threaded to receive a 1/4 -10 double end spigot? Trying to solve attaching a Amran/Apurture LED panel.

A: This pin is not threaded at all. It's designed to be used in a pinch-clamp of a C-stand. The end with the reduced diameter is where a strobe would be added, and tightened into place by the set screw of the strobe.

Q: 4. Why has B&H not updated the product title & description to explain it is not threaded?

A: The Impact SRP-110P 6" Baby Pin listed above has a 1/4"-20 female thread in front of the pin (mounting side) and a 3/8”-16 female thread in the back of the pin (collar side).

Q: 5. Will this work with GoPro Hero 7 Black?

A: You would need a USB-C or a Micro-HDMI-D for the GoPro Hero 7.

Q: 6. Is the Rode Vampire clip compatible with the new Rode Lavalier II mic?

A: The form factor of the Rode Lavalier II Omnidirectional Lavalier Microphone's capsule would not be well accommodated by the Rode Vampire Clip Double-Toothed Clothing Pin. The Rode Vampire Clip is designed for a cylindrical mic head found on models such as the Rode Lavalier GO. A better option in this clip style for use with the Rode Lavalier II would be Point Source Audio V-Clip Vampire Clip for Lavalier Microphones (BH #POVCLIPBL), which holds the microphone from the cable as opposed to the capsule: https://bhpho.to/3Mbe1G2

Q: 7. Does this cable work with the Fujifilm XT3 vertical battery grip?

A: No, the FotodioX Power Adapter Cable - D-Tap Male to 2.1mm Barrel (17.5") would not fit the FUJIFILM VG-XT3 Vertical Battery Grip. The grip does not use that size connector.

Q: 8. This cable is suitable for the Teradek Ace 500 series? The barrel connection is the same but I'm afraid of the polarity output in D-tap connector.

A: The FotodioX Power Adapter Cable - D-Tap Male to 2.1mm Barrel (17.5") is compatible with the Teradek Ace 500 HDMI Wireless Video Transmitter and Receiver Set.

Q: 9. Will this work with the 702 7 Bright model?

A: No, you will need a dummy battery like this: https://a href= http://www.bhphotovideo.com/c/product/1279655-REG/smallhd_pwr_adp_dca5_lemo_dtap_ki_dca5_faux_lp_e6_battery.html?sts=pi target= _blank www.bhphotovideo.com/c/product/1279655-REG/smallhd_pwr_adp_dca5_lemo_dtap_ki_dca5_faux_lp_e6_battery.html?sts=pi/a

Q: 10. Do they make a baby pin like this with the smaller end on both sides? I need something like this to attach my Forza 500 COB light to my Impact heavy duty light stand, the included spigot is way too small. What is the best way to attach my COB light to my Impact Heavy duty stand? Thank you

A: Yes, please review the Impact SRP-113 Long Double Stud 5/8". Impact SRP-113 Long Double Stud 5/8" BH #IMSRP113 • MFR #SRP-113 https://bhpho.to/3ii0Tpy