Quickly add support for powered devices such as advanced access points, IP security cameras, and VoIP phones by integrating the DS-3E0528HP-E 24-Port Gigabit PoE+ / PoE 4 Compliant Gigabit Unmanaged Switch from Hikvision into your business's network. Built for ease of use, this rack mountable switch features 24 Gigabit Ethernet ports, 20 of which support 30W PoE+ while the other four support 90W. Two Gigabit Ethernet RJ45 uplink ports are also available alongside two Gigabit SFP ports for fiber connections. With a plug-and-play design and total power budget of 370W, all you need to do is connect your compatible devices. No complicated management is required.

20 x Gigabit Ethernet PoE+ (30W)    4 x Gigabit Ethernet PoE 4 (90W)    2 x Gigabit Ethernet RJ45 Uplink Ports    2 x Gigabit SFP Slots    56 Gb/s Switching Capacity    41.66 Mpps Forwarding Rate    370W Power Budget    Up to 984.25' Range    Rack Mountable Design    Plug & Play

A 56 Gb/s switching capacity and a 41.66 Mpps forwarding rate help to ensure fast and reliable data transfers.

This switch automatically detects and restarts unresponsive cameras.

Configure the DIP switches to enable extended mode, which can transfer data at up to 10 Mb/s over a 984.25' range using select ports.

Separating data traffic between different ports helps to enhance network security.

The metal enclosure provides silent cooling, maintaining optimal performance without disturbing the environment.

Related Questions and Answers

Q: 1. Will this DVR support Hikvision DS-2CD2087G2-L ColorVu 8MP cameras?

A: The Hikvision DS-7604NI-Q1/4P 4-Channel 4K UHD PoE NVR with 2TB HDD (BH # HIQ14P2TB) is compatible with the Hikvision DS-2CD2087G2-L ColorVu 8MP Outdoor Network Bullet Camera with 2.8mm Lens (BH # HID2087G2L28).

Q: 2. what are some recommendations for cameras ?

A: The Hikvision DS-7604NI-Q1/4P 4-Channel 4K UHD PoE NVR with 2TB HDD can work with 100's of Hikvision camera models. Please see the link below for suggestions. Suggested 4mp cameras: https://bhpho.to/3uvDdV7

Q: 3. Does this item include a power cord and PoE injector?

A: This item does not include the POE injector.

Q: 4. will this power my Ubiquiti UAP-AC-IW ?

A: Yes it Will.

Q: 5. Will this power WIFI 6 LR AP ?

A: No you would need one like the B&H# UBPOE4824WG

Q: 6. I have a TPSCPOE 1248 solar powered PoE injector. It does 48V, .625A output, which makes it line up with 802.3at standard. I need the output to go to 24V passive poe for an access point. Would this work for that?

A: Indeed it will as that is what it is designed to do. From the Quick Start guide: PoE In Gigabit 802.3af PoE port: Connect this port to an auto-sensing 802.3af PoE Switch. The switch will automatically activate PoE. PoE Out Gigabit 24V passive PoE port: Connect this port to a 24V passive PoE device.

Q: 7. What protocols are supported?

A: This unit will only work with the Ubiquiti UniFi cameras.

Q: 8. Will this product work with a POE injector, and if so, which power rating will it need in volts?

A: Yes it will work with a PoE injector: PoE 802.3af (15 W)

Q: 9. Can this product be used with only a PoE network switch and cameras? Or does it require a separate UniFi Protect controller device to operate/configure?

A: You can only use this with Unifi cameras. It can be configured to view up to 16 cameras on a screen.

Q: 10. Does this come with wall mount?

A: The Ubiquiti Networks ER-6P 6-Port PoE EdgeRouter does not come with a wallmount kit.