The 6'-long Connectronics Premium Quality XLR Female to 1/4" TRS Male Audio Cable allows you to use a professional balanced mic with a 1/4" phone sound system. The 3-pin female XLR supports balanced signals, and the cable adapts them via 1/4" TRS connector, providing you flexibility in equipment choice and use.

3-Pin Female XLR    Use Pro Mic with 1/4" Phone Equipment

Related Questions and Answers

Q: 1. Can this be used as an adapter for PA's or DJ's desks into a XLR input on a recorder?

A: The Rode VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter is typically used to adapt microphones with 3.5mm wiring to XLR inputs, however this adapter could presumably work in the same manner with a line level 3.5mm connection from a DJ deck into a line level XLR input on a recorder.

Q: 2. will it work with takstar sgc-598?

A: That adapter will work for the Takstar SGC-598 microphone, to connect to an XLR input. Since that Takstar mic is battery powered, the less costly ROVXLR adapter would also work: https://bhpho.to/3AOKIE9

Q: 3. Is this compatible with balanced or unbalanced XLR?

A: The VXLR+ is designed to convert high voltage phantom power used with pro balanced XLR mic inputs into much lower bias voltage (plug-in power) that is needed by many unbalanced electret condenser mics like lavalier mics and shotgun style camera mics.

Q: 4. Is this adapter fully compatible with Sennheiser ME2 lapel mics?

A: Yes, it works with the ME2. The VXLR-Plus is the perfect alternative to going wireless. So I nstead of connecting the ME2 to the G3 wireless transmitter, simply connect your ME2 (or most other 3.5mm lapels) to the Rode VXLR-Plus and you have a hard-wired connection. Just make sure that the device you are connecting the VXLR-Plus to (i.e. your camera or recorder), has 48 volt phantom power enabled and you should be good to go.

Q: 5. Sanken COS-11D Omni Lavalier Mic With a Sennheiser 3.5 EW connector work properly with this adapter please?

A: My previous answer may be inaccurate. Some COS-11D microphones are 48V Phantom and some are +3V to +10V. You will need to determine the power requirements of your microphone. The VXLR Plus provides 5 Volts.

Q: 6. Can I use this with a Xlr splitter? I want to split a Lav mic into two inputs.

A: This would not be a recommended practice.

Q: 7. Will this work with the Deity W lav Pro (that is, instead of the similar Deity adapter)? Thanks!

A: This adapter should work with the mini jack connection provided in the W lav kit.

Q: 8. Hello. I have the f3 zoom. Is this adapter necessary with phanton power??? because the f3 has the option to give phantom power. I don't understand very well what it would be used for

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter would be used when you have a lavalier microphone with a 3.5mm connector, and you want to connect it to an XLR input. Lavalier microphones require a certain type of power, which is different from the 48v phantom power provided by XLR audio recorders. This adapter can convert that 48v phantom power to the special plugin power the lavalier needs. Compatibility will depend on the specific model of your lavalier.

Q: 9. Will this work w/ Sony PXW-Z90V? I dont understand the whole power converter thing

A: Yes the Saramonic C-XLR+ will connect to a mic input on the Sony PXW-Z90V.

Q: 10. I have a pair of rode videomicros (requires plugin power) and a pair of wireless lavaliers. I will be using them interchangeably depending on the project. I want to get 2 of this item because the videomicro requires power but I need to know if it will still pass the signal without phantom power because the lavaliers don't need plugin power?

A: Yes, this will pass audio without power.