Offering broad, consistent coverage, powerful sound, and a sleek, low-profile enclosure, the black SLP14/T from JBL lays a solid foundation for a wide range of installed audio applications, such as restaurants, retail spaces, hotels, resorts, and even home theater systems. With up to a peak 200W of power handling and a two-way driver system consisting of one 0.79" tweeter and one 4.5" woofer, the SLP14/T delivers potent, high-quality sound, and thanks to an award-winning design and a 15° down-tilted angle, it remains flush to the wall.

The 25W multitap transformer can support 70 and 100V or direct 8-ohm operation in installed systems, and connection to amplifiers is easy with a convenient 4-pin Euroblock terminal. This speaker is ADA compliant, at less than 4" deep, and is capable of handling outdoor installations too, with an IP44 water splash rating. The SPL14/T includes a slide-on wall bracket for easy installation, a 4-pin Euroblock plug, and a protective rain cover for the terminal during outdoor use.

For Restaurants, Retail, and Home Audio    Sleek, Flush-to-Wall Audio Solution    0.79" Dome Tweeter, 4.5" Cone Woofer    100W Continuous Program, 200W Peak    15° Down-Tilted Coverage    Multitap Transformer: 70/100V or 8-Ohm    4-Pin Euroblock Audio Connection    ADA-Compliant Design, Under 4" Deep    IP44 Water Ingress Protection    Includes Wall Bracket and Rain Cover

Related Questions and Answers

Q: 1. How doe the LH-40 compare to the LH-30 for loads of 4-5 lbs, such as a FF camera and a 24-70/2.8?

A: Either will work but the LH-40 has a much higher load capacity and would be more suitable for your setup.

Q: 2. Will this head work on a Benro A2580F tripod legs?

A: Yes, as the top of the center column of the (now discontinued) Benro Classic A2580F Aluminum Tripod has both 1/4"-20 & 3/8"-16 head attachment fitting screw threads, and as the base of the Benro GX30 Two Series Arca-Type Low Profile Aluminum Ball Head has a 3/8"-16" female threaded socket, the head and tripod would be compatible for use with one another.

Q: 3. Is the clamp removable to replace with different clamp?

A: Yes, the clamp can be removed and replaced. Important to note, however is that top of the "neck" of the ballhead is not flat, but has protrusions that slot into sockets found in certain quick release clamps (used to keep the assembly from twisting). Therefore, one must choose specific clamps with similar slot shapes to fit properly.

Q: 4. Does this ball head take a quick release lever?

A: Yes, the Benro GX35 Two Series Arca-Type Low Profile Aluminum Ball Head does come with a Quick release. It comes with the PU56 Quick Release Plate to be exact

Q: 5. Is this product still current ? I can't see it on Benro's website

A: Yes, this is a brand new head.

Q: 6. Does the Manfrotto 323 RC2 200PL-14 Plate work with the LH-40?

A: No. Please review the following items for your quick release need. https://bhpho.to/3CCKYqq

Q: 7. Will this head accommodate standard Arca-swiss plates and L-Brackets, such as SmallRig? Also, what is the base diameter?

A: Certainly! This will fit standard arca-swiss plates/L-brackets without issue. The diameter of the head's base is 51mm/2.00 inches.

Q: 8. Are the GX series compatible with the MT190CXPRO4 tripods? Is there a pin to lock the ball head in place? Which GX would be best for a Nikon Z6Ii with heaviest lens of z 70-200mm?

A: Yes, the Benro GX35 is compatible with the MT190CXPRO4 (and any other 3/8"-16 mounting screw tripod). The pin for the ballhead will be on the tripod mounting platform; gentle raise the screw to increase the tension/friction between the tripod and head to secure the head into place. For a Z6ii + 70-200 f/2.8, we recommend either the GX30 or the GX35; the latter of which is better if you foresee getting larger lenses in the future.

Q: 9. What is the height?

A: As per Benro, the GX25 would measure 3.34 inches high.

Q: 10. Are the GX series compatible with th Benro MeFoto GlobeTrotter Carbon Fiber Travel Tripod?

A: The Benro GX35 Two Series Arca-Type Low Profile Aluminum Ball Head is compatible with the Benro MeFOTO GlobeTrotter Pro Carbon Fiber Travel Tripod. However, the base of the head is wide, and the legs might not fold up as compact as it does with the included head.