Extend the reach of your D-Tap power source with this Coiled D-Tap Extension Male to Female Cable from Kondor Blue. The coiled power cable extends from 16 to 36" and features a D-Tap male connector on one end and a D-Tap female connector on the other end, which enables the extension of your power reach. The durable cable is braided for enhanced flexibility.

Extends D-Tap Power Source Reach    1 x D-Tap Male Connector    1 x D-Tap Female Connector    Cable Extends from 16 to 36"

Related Questions and Answers

Q: 1. Is this the newest version with more holes and a built in voltmeter?

A: Yes, the Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub (16") is the newest version with the LED Power Status Indicator. Our pictures do not always match but the descriptions explain the product and its features.

Q: 2. Is this cable regulated?

A: The Output Voltage on the Kondor Blue D-Tap To Sony L Series Dummy Battery NPF Cable is 8V (Regulated).

Q: 3. it will fit atomos Battery Eliminator with ninja v?

A: The Atomos Battery Eliminator's DC barrel size is 2.1mm. This would be DC to Dtap: https://www.bhphotovideo.com/c/product/1493127-REG/atomos_atomdtpcb2_d_tap_to_dc_barrel.html

Q: 4. Can the Blackmagic Video Assist be powered using the 12V output on this and a regular D-tap to DC cable?

A: Yes it can however it is usually safer to use a dummy battery solution such as the Kondor Blue D-Tap Power Cable to Sony L-Series Dummy Battery B&H # KODTAPSL MFR # KB-DTAP-SL (for the newer Video assists) or the Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable (16-36") B&H # KODTAPCLPE6 MFR # KB-DTAP-CLPE6 (for the original) It is much harder to find a DC cable with the correct sizing to fit the DC input on the monitor thus using one of the dummy battery solutions above takes all the guess work out of the equation. They are guaranteed to work as long as you get the model that fits the battery slot on the back of your video assist.

Q: 5. Does this fit the Atomos Battery Eliminator?

A: Yes, this cable is compatible with the Atomos Battery Eliminator.

Q: 6. Can this power the Canon R5C in 8K 60P raw?

A: No, the Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable (Kondor Blue, 16-36") would not be able to power the Canon R5 C in 8K60P RAW and be able to power attached lenses. That would require a PD USB-C cable or the Canon DR-E6C DC Coupler for EOS R5 C, B&H # CADRE6C, along with the Canon CA-946 Compact Power Adapter for Select Canon Cinema EOS Cameras and Camcorders, B&H # CACA946.

Q: 7. Will this work with the amaran cob 60x? 5.5 vs 2.5 confuses me.

A: No, The Kondor cable will not work. Please use the following Dtap cable BH #AP0152A30 https://bhpho.to/3zfCfuG

Q: 8. Will this work on atomos ninja to v mount ??

A: Yes, the Kondor Blue D-Tap To Sony L Series Dummy Battery NPF Cable will allow you to power the Atomos Ninja V, And Ninja Models from a V-Mount battery. Also, the locking cable below connects to the Atomos battery eliminator that comes with every Ninja model. It will also allow you to power the Ninja from a V-mount battery DTAP port. Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 50") BH #KODCTAP21LCK

Q: 9. Can this be used to power a SmallHD 502 Bright monitor?

A: Yes, the SmallHD 502 Bright On-Camera Monitor is powered by Canon LP-E6 batteries. The Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable would be able to power your display.

Q: 10. What is the maximum output current/power on the regulated 12v. output? I am building a rig that will draw about 5 amps/60 watts.

A: The DTAP input connection on the Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub will distribute and divide a total of 4.1A / 50W to the four DTAP ports.