Built to deliver high power with an extended data range of up to 2690 feet, the base side LONGSPAN Max Hi-PoE Extender from Veracity enables delivery of 802.3bt (90W) PoE connection to an IP camera or remote network device. This base unit receives PoE power from a PoE switch or optional 57 VDC power supply and transmits it via Cat 6 or Cat 5e cable to the camera side extender (available separately), and finally to the camera or IP device.

Featuring an unrestricted 10/100 Mb/s full-duplex network connection, this unit self-configures for optimum performance every time it is connected and eliminates the need for user setup, DIP switch settings, and system pairings. Built-in surge protection minimizes system failure in the event of voltage and current spikes.

Extends Ethernet Networks    Data Range up to 2690'    200 Mb/s Data Rate    802.3bt PoE Input (90W)    Unrestricted 10/100 Mb/s Connection    Self-Configuring    Built-In Surge Protection

Full-speed, long-range, point-to-point Ethernet connection over regular Cat 6 and Cat 5e cable

Fully automatic, simple to install, and maintenance-free

Smart PoE power and diagnostic display for reliable installation

LONGSPAN devices self-configure for the best performance possible when connected and eliminates the need for user setup, DIP switch settings, and system pairings

Veracity's SAFEVIEW technology provides confirmation of link status, power availability, and diagnostic information

LED indicators for status

Optional DC power input

Related Questions and Answers

Q: 1. Up to 1600' using RG11 cable at full rate. Does this mean a maximum distance is capable of 1600' on RG-11 or means a further distance is achievable but signal speed would decrease and not run at 200 mbps?

A: The details about the distance is due to the Bandwidth limitation.

Q: 2. Whait is the difference between the outreach lite and the outreach max Ethernet extender?

A: While both units need PoE to function, the Outreach Max MUST send power and data or the unit will not function properly. The Outreach Lite is the device you would use to extend data without power and additional 100 meters.

Q: 3. Would this work with the Sachtler Ace tripod?

A: Yes, if it has a 75mm ball head. It should work with all 75mm ball head tripod heads.

Q: 4. Can this be used on a photography tripod like the Manfrotto 190xprob and mount a fluid head? Or should I just buy a video tripod with a fluid head already included instead?

A: I purchased this riser to be used at our church. It is screwed to the balcony front rail and has a Manfrotto fluid head supporting the Panasonic video camera. It is very well made, light yet sturdy and stable for our needs. I would think this mounted to a sturdy/beefy photo tripod and a fluid head will work quite well.

Q: 5. What's the weight capacity?

A: The manufacturer does not list a weight capacity anywhere. However, the ikan IK-RSR6 will be able to support more weight than any tripod head you fix onto the riser.

Q: 6. What type and size of pipe "track" should be used?

A: The Dana Dolly Hi Hat Universal Kit (B&H# DADDHHUK1) may be used with pipe that is 1.5 to 1.9 inches (3.8 to 4.8 cm) in diameter. Schedule 60 steel pipe is enough for most uses, but if you will be using an especially heavy load then schedule 80 could be used.

Q: 7. Can this be monitored with SNMP?

A: From the manufacturer: TIMENET Pro provides a clean and simple browser interface for setting up the IP address and configuration password. The status tab displays information such as system up-time GPS lock, UTC and local time, plus an extremely useful satellite signal meter. This meter shows satellites in view, and their signal strength.

Q: 8. Can this work for a camera with these requirements Per camera: Hi-PoE: 42.5 VDC to 57 VDC, max. 38W/0.9 A?

A: This is passive poe. it most likely is not going to work with a surveillance camera

Q: 9. Do the legs lock in place so they can not be moved in any direction, or do they only lock in that they can not move further outward?

A: You can lock the legs in place.

Q: 10. I need to extend my network runs, possibly twice (resulting in 3 segments). The devices will not handle POE. Would the Outreach Lite work for this application or is there a better solution available?

A: This will allow you to extend your signal 3 times if needed but does not send POE.