Protect your Angenieux EZ-1 and EZ-2 lenses during potentially dangerous shooting scenarios with this Cinema True Protector Explosion-Proof Filter from NiSi. Featuring a Professional Explosion-Proof Layer, this filter will not shatter like normal glass, preventing additional damage to your lens' front element. It is also designed to have no effect on image quality by using clear water white glass along with a double-sided anti-reflective coating. For enhanced durability, the filter is equipped with shatterproof and waterproof coatings as well as a cinema edge seal.

For Angenieux EZ-1 and EZ-2 Lenses    Screw-On Design with Custom Threads    Professional Explosion-Proof Layer    Clear Protection Filter    No Effect on Image    Double-Sided Anti-Reflective Coating    Shatterproof & Waterproof Coatings    Cinema Edge Seal    Made from Water White Glass

• Angenieux EZ-1
• Angenieux EZ-2

Related Questions and Answers

Q: 1. How does this attach to the lens and does it change any of its optical characteristics?

A: Angenieux has a video tutorial where they show you how to change the lens. https://www.youtube.com/watch?v=W40n1v43mEE

Q: 2. Is this lens remote compatible via direct wire input?

A: The three "wiring" options available are 20-pin Hirose - analog and remote Control; 12-pin Hirose - direct to lens port on camera; and a 6-pin LEMO - MBUS port.

Q: 3. Which dial on the grip controls the focus motor?

A: On the bottom of the unit there are two switches to enable manual or servo control for both the focus and zoom. Change the focus switch to "S" for servo and change the zoom switch to "M" for manual. Use the rocker on the top of the unit to control focus.

Q: 4. I have a BlackMagic URSA Mini Pro, which has a PL mount and a 12-pin lens connector. Does the MSU-1 include the correct cable, or if not which cable do I need?

A: You will need a 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable. Angenieux CC1212 12-Pin to 12-Pin Hirose Cine Camera/Servo Connection Cable https://www.bhphotovideo.com/c/product/1397131-REG/angenieux_mvc_501_01_17_cc1212_12_pin_to.html

Q: 5. Looking for a hood for a canon 17-120mm. Will this guy do the job, will it vignette?

A: The Angenieux Hood with Cap for Type EZ Zoom Lenses would not be compatible with a Canon 17-120mm.

Q: 6. Can hold 114mm schneider close up?

A: While it is possible that this 114mm Shatter Proof Protector Filter from NISI could fit a 114mm Schneider Close Up Lens, they have not been tested together to our knowledge.

Q: 7. Can you clamp a 114mm matte box on top of this to add additional filters?

A: No, we would not recommend clamping a matte box to the NiSi 114mm Shatter-Proof Protector Filter as it doesn't have a front filter thread to screw the clamp adapters into nore does it have a sturdy flat exterior to clamp down around.

Q: 8. This works for both S35 and FF configurations of the lens, right?

A: Yes, The Angenieux RF Mount for EZ Lens would support both Full Frame and Super35 sized sensors.

Q: 9. Does this ef mount come with shims for back focus adjustment?

A: No, the Angenieux EF-Mount for EZ-1 and EZ-2 Zooms does not include shims.

Q: 10. Can I connect this via LBUS to Arri cameras/RIA-1 to make use of the run/stop feature?

A: The Angenieux MSU-1 Universal Cine Servo with 3 Motors & Wireless Module for EZ-1/EZ-2 Lenses (B&H# ANMSU1) does allow for start/stop, and the ARRI Radio Interface Adapter RIA-1 Set (B&H# ARRIA1S) does offer start/stop control. However, no cable is included for making a connection to the 4-pin LBUS port on the RIA-1.