Video Recording Studios Editing St Louis

Multidyne V4-3917-0x4-sxxeb-st 12g-sdi Video Portable/throw Down Fiber Optic Receiver

Product Code: ga130409
Availability: In Stock

$15,060.00 $23,794.80

Qty

0 reviews Write a review

Description
Reviews (0)

This V4-3917-0X4-SXXEB-ST 12G-SDI Video Portable/Throw Down Fiber Optic Receiver from MultiDyne features four 12G-SDI video outputs, one Genlock/Sync input, and one Gigabit Ethernet port, and it supports single-mode fiber operation with integrated ST connector. This unit requires the use of V4-3917-4X0-SXXEA-ST at the other end of your fiber cable to perform. Housed in a V4 enclosure. An optional rackmount kit is available.

4 x 12G-SDI Output Single-Mode Fiber with ST Connector Optional Rackmount Kit Available

Interfaces
Inputs	1x ST (Fiber)
Outputs	4x BNC (12G-SDI)
Other I/O	1x BNC Genlock Input 1x BNC Genlock Loop Output 2x RJ45 10/100/1000 Ethernet
Standards
Video Standard Compliance	SMPTE 259M/292M/344M/424M/ST-2081/ST-2082/ST-2083
HDR Support	Yes
Reclocking	Yes
Transmission
Max Transmission Distance	12.4 Miles / 20 km (via Single-Mode Fiber) 24.9 Miles / 40 km (via Single-Mode Fiber) 49.7 Miles / 80 km (via Single-Mode Fiber)
Audio Format	AES/EBU
Supported Cable Types	Single-Mode Fiber
Power
Power I/O	1x Barrel Input
PoE Support	No
Power Consumption	(7.34 W)
General
Operating Conditions	-13 to 131°F / -25 to 55°C up to 95% Humidity
Dimensions	7.25 x 4.22 x 1.75" / 18.41 x 10.72 x 4.45 cm

Related Questions and Answers

Q: 1. Can I use this in simplex, just one LC connector? After adding a module of course.

A: Yes, that should work.

Q: 2. could one of the channels carry reference/genlock?

A: No only digital SDI Video signals. Reference is an analog signal.

Q: 3. Will this accept TP-Link TL-SM5310-T 10G SFP+ to RJ45 Adapter Module?

A: No, the SFP+ to RJ45 adapter modules are not compatible with the Blackmagic Design Mini Converter Optical Fiber 12G-SDI.

Q: 4. Does this support Talkback on the ATEM TV Studio 4K?

A: Yes it is compatible with the ATEM Talkback system.

Q: 5. What's the latency when converting SDI to fibre and then back to SDI again?

A: There is a near zero delay in this conversion, as that is one of many benefits of transmitting/extending over optical fiber.

Q: 6. How long of a run can this handle?

A: Depending on what type of fiber cable you are using, distances can be hundreds of feet to many miles.

Q: 7. Does it come with a power supply?

A: Yes.

Q: 8. Is there an SFP for this that can do Multimode om3 fiber?

A: The Black Magic SFP options only support Duplex LC Connectors compatible with singlemode Fiber. Compatible with Singlemode Fiber Black Magic SFP options. https://bhpho.to/3P511DN

Q: 9. Is there a rack shelf accessory for this?

A: The ShieldRock Rack10 works well. You can also add-on a single power supply, power splitters, and DC barrel cables if you want it all super-organized.

Q: 10. Does this work with the Blackmagic Design Studio Fiber Converter?

A: No. The Studio Fiber Converter can only connect to the Camera Fiber Converter using a SMPTE fiber cable. The signal is not compatible with the Mini Converter Optical Fiber.

There are no reviews for this product.