View the content from two different computers simultaneously on two screens at resolutions up to 4096 x 2160 with the 2-Port 4K Dual View DisplayPort Matrix KVMP Switch from IOGEAR. Using Extension Mode, users will be able to use one system at a time, which allows the content of the selected computer to be displayed on two monitors. When Matrix Mode is activated, both systems will be simultaneously displayed on both monitors, regardless of which system is selected.

As this switch can be used to control two computers and two displays, there are two CPU inputs, each of which has two DisplayPort 1.2 ports, both of which support audio and video, one 3.5mm audio jack, one 3.5mm microphone jack, and dual 5 Gb/s USB-B ports. Available console connections include two HDMI 2.0 ports, two 5 Gb/s USB-A ports, two 480 Mb/s USB-A ports for a keyboard and mouse, two 3.5mm audio jacks, and two 3.5mm microphone jacks.

Display Two Computers on Two Displays    Extension and Matrix Modes    One Console and Two CPU Connections    HDMI | DisplayPort | USB-A 3.2 Gen 1    3.5mm | USB-B 3.2 Gen 1    Supports Resolutions up to 4096 x 2160    LED Indicators    Windows, Mac, and Linux Compatible

Most multi-monitor KVMs only allow you to extend the desktop of a single computer to two screens. The IOGEAR GCMS1922 is different, as it can also be used in matrix mode. This allows you to see the content from two different computers on each screen. You can easily switch between extension and matrix mode by pressing the mode button on the front panel or the remote port selector module. The GCMS1922 is the ideal tool for users who need to multitask on two computers.

Maximize your high-end workstations with the GCS1922 2-Port 4K Dual View DisplayPort Matrix KVM Switch. Experience Cinema 4K resolutions-up to 4096 x 21 at 60 Hz on each monitor, along with rich bass, 7.1 surround sound via DisplayPort, and two 5 Gb/s USB-A peripheral ports.

In Matrix Mode, view two different computer desktops on connected monitors and use your mouse to travel across both systems without needing hotkeys or push button to access either computer. No software is needed and multiple layouts are available.

Sound can serve as a helpful alert for better situational awareness while multitasking. When using the Audio Mixer feature, the audio coming from both computers can be mixed up to hear both audio sources simultaneously, regardless of which computer is in focus.

You can control and share two USB 3.0 peripherals between two computers at an impressive speed of up to 5 Gb/s. Moreover, the USB peripheral can be disconnected from the KVM port switching. This allows you to work with the connected USB device on one computer while switching to the other one for other tasks without any disruption.

There are four ways for GCMS1922 port switching. Hotkeys, pushbuttons on the front panel, the mouse wheel button, and the remote port selector, so you can pick the way that best fits your needs. For mode switching, you can use the mode pushbutton on the front panel, hotkeys, or the remote port selector to implement.

Related Questions and Answers

Q: 1. Will this work with a Thunderbolt 3 PC? If so, how would the three rear thunderbolt ports function? Will one act as a fully-equipped Thunderbolt 3 port, while the others switch to 10g USB3/4 with video support?

A: The Kensington SD5700T 4-Port Thunderbolt 4 Dual 4K Docking Station requires a fully qualified Thunderbolt 4 port to operate properly, otherwise unexpected and unsupported results can arise as this model is intended for use with full Thunderbolt 4 bandwidth.

Q: 2. How long is the AC adapter cable?

A: Measuring, from where the cable leaves the power supply plug to the tip of the plug that goes into the hub, it's 48" (4').

Q: 3. Will this power adapter works with 220 V?

A: The power adapter of the IOGEAR met(AL) USB 3.0 4-Port Hub can also support 220v.

Q: 4. Do you see 2 independent inputs inside your software, like wirecast, Obs, Mimolive etc? Or do you have to switch the inputs from a software before it gets to the computer USB?

A: Yes. The independent inputs will be seen.

Q: 5. Thunderbolt 4 to HDMI. My ASUS laptop has 2 Thunderbolt 4 sockets. If taking one of these to the hub, then from the hub to two displays using HDMI. Do the Thunderbolt to HDMI cables need to be active or have any specific features?

A: The SD5700T 4-port Thunderbolt 4 only supplies power through USB since it does not have HDMI ports, an adapter would be needed. It would depend on the monitor that is being used and the adapter if power will be supplied to said monitor.

Q: 6. Will this plug directly into a 2019 iMac with USB C ports or is an adapter required?

A: You would just need to go and connect this device using the USB-A port.

Q: 7. If I plug this into a USB 2.0 port on laptop, will it safely provide full required power to a USB 3.0 device using the AC adapter, while still allowing the device to communicate/sync/etc (at USB 2.0 speed) with the laptop?

A: I have used the IOGEAR hub connected to my early Mac Air laptop that has two USB 2.0 ports. IOGEAR hub was powered by its provided AC adapter. Laptop was not plugged into AC power. Then I connected a Kingston USB 3.0 hi-speed media reader to the the IOGEAR hub. Finally into the Kinston media reader I inserted a CF card from my Canon. Images transferred without any problem. Hope this helps.

Q: 8. Does this product support PAL HDMI transmission or only NTSC?

A: It will support NTSC frame rates only.

Q: 9. How seamless is the switching? Is there any video "tearing"?

A: IOGEAR says : Thank you for choosing IOGEAR. Video tearing is present however it is minimal . This is only present when switching ports. Once again, thank you for choosing IOGEAR.

Q: 10. From one of the answers, it sounds as though the hub will work without the AC. Is this true?

A: You should be able to use the IOGEAR met(AL) USB 3.0 4-Port Hub with Power Adapter without its power supply. But that's going to depend on the devices you're planning to connect. If you're connecting multiple external hard drives, I recommend to use the hub with its power supply.