Power your camera, lights, and gear with an efficient power supply with this AlphaV 28V 500W Fanless Power Supply from Core SWX. This fanless power supply is designed to provide a quiet presence on set, and it is constructed with aluminum to assist in heat dissipation. It can hang onto your light stand, rigging, or tripod using its built-in heavy-duty rope handle.

The unit receives mains power with a standard 90-240 VAC plug, and it provides 500W, 28V power via its two 3-pin XLR outputs. It features an LED power indicator to show status of power-up, standby, or active power.

Power Supply for Camera/Lighting Gear    2 x 3-Pin XLR Outputs    500W, 28V Total Power Output    Quiet, Fanless Design    Rope Handle to Hang on Stands/Rigging

Related Questions and Answers

Q: 1. Would this work with a sony PMW F3?

A: Yes, the Core SWX SPU-4 Compact Power Supply would work with the Sony PMW-F3L.

Q: 2. Would I'be able to power two Sony Z190 with this power supply unit?

A: The Core SWX Cube 200 Power Supply (B&H# COCUBE200) can supply up to a maximum of 200W, that is, 100W from each of its two 4-pin XLR ports. Each is more than enough for the power demands of the Sony PXW-Z190 4K 3-CMOS 1/3" Sensor XDCAM Camcorder (B&H# SOPXWZ190). It would also be a good idea to find a voltage regulator to drop the voltage from the 14.3V of the Cube 200 to the 12V that the camera requires. A safer option would be just to use the AC adapter and charger that came with the camera, the Sony BC-U1A Battery Charger / AC Adapter for BP-U90, U60, U60T, U30 (B&H# SOBCU1A).

Q: 3. Will it work with Arri Alexa Plus?

A: No, the following charger does not have the proper Voltage to power up the Arri Alexa Plus XT unit. Please look at the following charger Wooden Camera 24V Power Supply for ALEXA XT, SXT, SXT-W & Classic https://bhpho.to/38jdH6B

Q: 4. It works with blackmagic studio camera???

A: Yes, there is a 4-Pin XLR port that takes 12 to 15V.

Q: 5. Would this work with a sound devices 664 mixer?

A: Unfortunately no and for two reasons. 1. The Sound Devices 664 requires a Hirose power plug, not the 4 pin XLR plug of the Switronix SPU-4.2. On a delicate electronic device such as the Sound Devices 664, I would not substitute anything that was not a OEM supply for fear of electrical damage.

Q: 6. Does this work with the Blackmagic Studio 4k camera?

A: Yes. The unit will provide the power needed for the blackmagic studio 4k camera.

Q: 7. Will this power up a Panasonic Aw-UE150 or AW Rp150 remote?

A: Yes. please also review the following if you are interested in saving a bit. IndiPRO Tools 12V Power Supply with 4-Pin XLR Connection BH #INIP4PPS • MFR #IP4PPS https://bhpho.to/3wdj6cO

Q: 8. Will this work with the Core SWX Battery Plate for the Sony FX9?

A: Yes it should work well.

Q: 9. Will this provide adequate power for a Sony FS7 with extension unit?

A: Yes, the Core SWX SPU-4 Compact Power Supply will provide adequate power for a Sony FS7 with an extension unit.

Q: 10. Will this power a Rayden Ikan RB5 LED light?

A: No, that is not the correct AC adapter for the RB5. The correct one is, ikan AC Adapter for LB5 / LW5 / MB8 / MW8 / RB5 / RW5 LED Lights BH #IKAC15V4A • MFR #AC-15V-4A https://bhpho.to/2H1N6Rs