The AV-3207 4D Serial & IP Joystick Controller from AViPAS offers joystick and button control for your PTZ cameras with support for VISCA IP, and ONVIF protocols over IP and Pelco-P, Pelco-D, and VISCA protocols over RS-232, RS-422, and RS-485 serial communication. It enables you to control the speed of your pan, tilt, zoom, and lock moves and incorporates an LCD screen. The controller features seven quick camera select buttons and it can control up to 255 cameras.

The controller also offers presets including gain, iris, focus, red and blue gain, white balance, color, and speed control settings to control the finer settings on the PTZ cameras. The AV-3207 features two IP control modes using VISCA IP and ONIF and three serial control modes using RS-422, RS-485, and RS-232. All configuration is done using the bright, backlit OLED display. The unit comes with a 12 VDC power supply or it can be powered using Power-over-Ethernet (PoE).

4D Pan / Tilt / Zoom / Lock PTZ Control    IP & Serial RS-232/422/485 Communication    2 x IP & 3 x Serial Control Modes    VISCA/VISCA IP/Pelco-P & D/ONVIF Support    Power-over-Ethernet (PoE) Support    12 VDC Power Supply Included    Backlit 3.12" OLED Display    Control up to 255 Cameras

4D joystick and button control with simultaneous IP/serial communication

3.12" backlit OLED display

Control speed of pan/tilt and zoom in/out

IP, RS-232, RS-422, and RS-485 communication

VISCA-over-IP, Pelco-P, Pelco-D, ONVIF, and VISCA protocols

Control up to 255 cameras

Seven quick camera selection buttons

Two IP control modes via RJ45 (IP VISCA and ONVIF); three serial control modes (R-S422/RS-485 and RS-232)

Control focus, iris, red gain, and blue gain control with joystick/buttons/knobs

Power-over-Ethernet (PoE) support

USB-C port for updates

Related Questions and Answers

Q: 1. Does this work with the Datavideo ptc 150 ptz cameras?

A: Yes. The following unit offers RS-232/422/485 communication.

Q: 2. How do I connect multiple cameras to this single port unit?

A: That would depend on the cameras being used and how you need to wire them. Some options will require you to customize cables for use with the Green Phoenix connectors on the back or you may need to daisy chain RS-232 cables.

Q: 3. It can control Sony SRG360SHE? Thanks

A: We recommend the Sony B&H # SORMIP10 controller for the Sony SRG360SHE. However, while the AVMATRIX Professional IP & Serial PTZ Camera Joystick Controller should work, there will be no support from Sony or Avmatrix if you run into setup issues.

Q: 4. Will this work with a Tevo-vhd20n ptz camera?

A: Yes, The AViPAS 4D Serial Joystick Controller (No IP Function) should control your camera using the Visca protocol. You would need a Visca cable like the following model. TecNec Visca Camera Control Cable 9-P D-Sub F to 8-P DIN M 50 Ft BH #TEV9F50 https://bhpho.to/3hTeILq

Q: 5. Will this work with Datavideo PC150 PTZ Camera?

A: The Datavideo recommends using the Datavideo RMC-180 Mark II PTZ Camera Controller or the Datavideo Universal Remote Control Panel for Datavideo PTZ & Block Cameras for use with a Datavideo PTC-150 HDMI/SDI PTZ Video Camera. No other models are recoomended for use with these cameras.

Q: 6. I have avipas av-1081. if I use this av-3104se is it a simple RS232 cable to camera or is more to it. ifso doyou have the cable?

A: The AViPAS 4D Serial Joystick Controller (No IP Function) does support RS-232 via it's D-Sub 9-Pin output. You could connect the controller directly to the camera using a cable like the TecNec Visca Camera Control Cable 9-P D-Sub F to 8-P DIN M 50 Ft (BH #TEV9F50). See: https://bit.ly/42jOYJZ

Q: 7. I have never used a PTZ camera before. Can I somehow connect a AViPAS AV-1081 HDMI PTZ Camera to this and to an ATEM Mini switcher (via HDMI), to use this as one of three cameras connected to the ATEM Mini?

A: Yes, the following unit will worked connected VIA RS-232 and connect to BlackMagic atem mini via HDMI.

Q: 8. Hi, will this controller be able to work with JVC-KY PZ100 cameras? Thank you!

A: Yes, the JVC KY-PZ100 Robotic PTZ can be driven via RS-232 or RS-422 bridge control.

Q: 9. Will this work with the Canon CR-N300?

A: They both specify compatibility with VISCA control protocol, so they may be configured to work together. However, we recommend sticking with Canon controllers for Canon PTZ cameras for a seamless experience.

Q: 10. Will this work with the new Canon XC protocol?

A: No, the AVMATRIX Professional IP & Serial PTZ Camera Joystick Controller does not support the Canon XC protocol.