Control USB-C LED fixtures such as an INFINIBAR, MT Pro, or MC Pro via DMX/RDM wired control with this Active USB-C to 5-Pin DMX In & Out Adapter with Mounting Kit from Aputure. The kit includes one USB-C to DMX in/out adapter cable, a 3/8"-16 magnetic mount adapter, a 3/8"-16 to 1/4"-20 screw adapter, and a 3/8"-16 to Lightning clamp adapter. The 3/8"-16 screws feature anti-twist divots that allow you to mount the adapters securely onto your rig.

The adapter features a single male USB-C connector on one end for connection to the LED fixture, and on the other end is a Y-cable featuring 5-pin DMX input and output connectors for connection to your DMX control gear.

The box between the cabling ends features a built-in DMX/RDM chip that facilitates stable wired DMX control and an additional USB-C port that allows you to simultaneously power and charge the lights via your DMX system. The adapter cable measures 24.6" in length.

USB-C to 5-Pin DMX In/Out Adapter Cable    3/8"-16 Magnetic Mount, 1/4"-20 Adapter    3/8"-16 to Lightning Clamp Adapter    Control INFINIBARs, MT Pro & MC Pro    Simultaneous Charge & Control via USB-C    Built-In DMX/RDM Chip    Cable Measures 24.6" in Length

• Compatible with INFINIBAR series, MT Pro, and MC Pro fixtures
• Connect wired DMX-capable Aputure lights to a DMX network in series via USB-C
• USB-C interface to standard 5-pin DMX input and output
• Additional USB-C port provides power to connected fixture  for simultaneous control and charging ability
• Built-in DMX/RDM chip
• 24.6" cable length
• Includes 3/8"-16 magnetic plate adapter, 3/8"-16 to 1/4"-20 screw adapter, and 3/8"-16 screw to Lightning clamp adapter

Related Questions and Answers

Q: 1. Does this come with any sort of diffusion?

A: A Silicone Rubber Diffuser is included in the box.

Q: 2. Does it work with the android system?

A: Yes it does.

Q: 3. What is Magic Tape?

A: Magic Tape is made up of small patches (approx. 1.5" x 1.5") of adhesive tape on one side and velcro on the other.

Q: 4. Is this able to charge and control the Aputure MC pro at the same time? If so, how does that work? Is there a second USBC input?

A: The Aputure Active USB-C to 5-Pin DMX In & Out Adapter for MT Pro, MC Pro & INFINIBARs outputs power via USB-C due to the power that comes from DMX cable when connected to a source. If you are using DMX to control your Aputure MC there is only a USB-C input, so in order to control you can use Aputure Active USB-C to 5-Pin DMX In & Out Adapter that will convert the signal and the power from DMX source into Aputure MC. All DMX cables use 1 pin for power ( Ground/Common) and the other 4 for transferring DATA in and out.

Q: 5. Is this compatible with Amaran F21c?

A: No, the Aputure Active USB-C to 5-Pin DMX In & Out Adapter for MT Pro, MC Pro & INFINIBARs is not for the Amran F21C. This is the correct one, Aputure USB-C to DMX Adapter (Single), https://bhpho.to/46ZaPIO.

Q: 6. Is the kit case safe to travel and flight? You can go on a plane with it?

A: Yes, the Aputure MC Pro 8-Light Charging Case is safe to travel and fly with. This case also supports attaching a lock for further anti-theft protection.

Q: 7. can you mount it on you camera?

A: Yes, this has a 1/4"-20 thread under it which you can use with a shoe mount, such as BH #VECSBH2 , to connect it to your camera. https://bhpho.to/2tKxCdV

Q: 8. Will these charge on the old MC charging case?

A: No, the charging port on the Aputure MC Pro RGB LED Light Panel is in a different location and so will not work with the older MC charging case.

Q: 9. Can you use this for still photography as a light source?

A: Yes, you can use this for still photography.

Q: 10. Can I leave this plugged in when not in use?

A: yes you can leave it plugged in when not in use