Control USB-C LED fixtures such as an INFINIBAR, MT Pro, or MC Pro via DMX/RDM wired control with this Active USB-C to 5-Pin DMX In & Out Adapter from Aputure. This adapter features a single male USB-C connector on one end for connection to the LED fixture, and on the other end is a Y-cable featuring 5-Pin DMX input and output connectors for connection to your DMX control gear.

The box between the cabling ends features a built-in DMX/RDM chip that facilitates stable wired DMX control, and an additional USB-C port allows you to simultaneously power and charge the lights via your DMX system. The adapter cable measures 24.6" in length, and the box can be mounted using separately available magnetic mounts.

Single DMX Adapter Cable    USB-C to 5-Pin DMX In/Out Connectors    Control INFINIBARs, MT Pro & MC Pro    Simultaneous Charge & Control via USB-C    Built-In DMX/RDM Chip    Cable Measures 24.6" in Length

• Compatible with INFINIBAR series, MT Pro, and MC Pro fixtures
• Connect wired DMX-capable aputure lights to DMX network in series via USB-C
• USB-C interface to standard 5-pin DMX input and output
• Additional USB-C port provides power to connected fixture  for simultaneous control an charging ability
• Built-in DMX/RDM chip
• 24.6" cable length

Related Questions and Answers

Q: 1. will it work with a D-tap off my ENG camera?

A: Yes, the following cable is require in order to do so. Please review to see what we have in stock https://www.bhphotovideo.com/c/search?q=dtap%20to%20usb-c&sts=ma

Q: 2. Is this able to charge and control the Aputure MC pro at the same time? If so, how does that work? Is there a second USBC input?

A: The Aputure Active USB-C to 5-Pin DMX In & Out Adapter for MT Pro, MC Pro & INFINIBARs outputs power via USB-C due to the power that comes from DMX cable when connected to a source. If you are using DMX to control your Aputure MC there is only a USB-C input, so in order to control you can use Aputure Active USB-C to 5-Pin DMX In & Out Adapter that will convert the signal and the power from DMX source into Aputure MC. All DMX cables use 1 pin for power ( Ground/Common) and the other 4 for transferring DATA in and out.

Q: 3. Can you use this for still photography as a light source?

A: Yes, you can use this for still photography.

Q: 4. Would this provide the necessary pre-amplication for a Sennheiser MKH-416 to Nikon Z6? Thanks!

A: Certainly would: Gain Lo: +15 dB Hi: +30 dB Phantom Power Regulated 48 V Current to 14 mA (Direct Short) Plug-In Power 3.5 V on All Mini-Jack Mic Inputs

Q: 5. can thisbe used to plug a canon G50 audio in thru a mixer?

A: The inputs are designed for microphone level signals.

Q: 6. Does your DSLR have to have an audio output to be able to monitor audio with this device? I have a Nikon D5300.

A: You can monitor the audio on the Beachtek as it is going to the camera. You wont be able to monitor the audio that is being recorded though as the camera does not have a headphone port.

Q: 7. Does it come with at least one stereo mini cable, and other stuff like adapters? Cause there's nothing about that in the whats in the box , but if you see packaging pictures in the internet, you will see those things in the box.Thanks

A: The Beachtek DXA-Micro Pro ships with two 3.5mm (1/8 ) stereo cables for connection to/from a camera.

Q: 8. Does it work with the android system?

A: Yes it does.

Q: 9. Is the kit case safe to travel and flight? You can go on a plane with it?

A: Yes, the Aputure MC Pro 8-Light Charging Case is safe to travel and fly with. This case also supports attaching a lock for further anti-theft protection.

Q: 10. Will this provide plug in power not phantom power for lav mic

A: Yes, according to the operating manual i downloaded and printed this provides 3.5 volts on all mini-jack mic inputs.