Seagate 6Tb External Hard Drive Year 2010 Model

Seagate 6tb Ironwolf Pro 7200 Rpm Sata Iii 3.5" Internal Nas Hdd (cmr, Retail, 2-pack)

Product Code: ga131291
Availability: In Stock

$1,319.94 $1,623.53

Qty

14 reviews Write a review

Description
Reviews (14)

Designed to deliver performance, reliability, and dependability in multi-bay, multi-user RAID and NAS environments within commercial and enterprise settings, the 6TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD from Seagate is built to withstand 24/7 operation, or 8760 hours per year. This 6TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, and a 256MB cache, providing users with ample storage capacity with data transfer speeds of up to 250 MB/s. The IronWolf Pro also has an MTBF rating of 2 million hours and a workload rate of up to 550TB per year. Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver enhanced RAID performance. Included is a limited 3-year Data Recovery Service that helps you retrieve damaged data in the event of a mechanical error, accident, or natural disaster, and overall protection is provided by a limited 5-year warranty.

6TB Storage Capacity per Drive 3.5" Form Factor SATA III 6 Gb/s Interface 256MB Cache 7200 rpm Up to 250 MB/s Data Transfer Rate 2 Million Hours MTBF Workload Rate: 550TB per Year AgileArray Technology Seagate Rescue Data Recovery

Key Specs
Total Installed Storage	6 TB
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 250 MB/s
Write Speed	Maximum: 250 MB/s
Parameters
Drive Type	SATA III / 3.5" HDD (7200 rpm)
Read Speed	Maximum: 250 MB/s
Write Speed	Maximum: 250 MB/s
Encryption Support	No
Mean Time Between Failures (MTBF)	2.0 Million Hours
Endurance (Total Bytes Written)	550 TB
Power Draw	9.3 W (Active) 7.1 W (Idle) 1.0 W (Standby)
Input Power	12 VDC at 2 A
General
Operating Conditions	32 to 97°F / 0 to 65°C
Operating Shock	70 G / 2.0 ms
Storage Conditions	-40 to 158°F / -40 to 70°C
Dimensions	5.79 x 4.01 x 1.03" / 146.99 x 101.85 x 26.11 mm
Weight	1.6 lb / 716 g
Packaging Info
Package Weight	1.9 lb
Box Dimensions (LxWxH)	8.8 x 6.1 x 3"

All-CMR (conventional magnetic recording) portfolio enables consistent, 24/7 performance, allowing users to access data virtually anytime, anywhere.

Up to a 550TB per year workload rating, a 2 million hours MTBF, and a limited 5-year warranty for a solid total cost of ownership (TCO).

Seagate provides complimentary Rescue Data Recovery Services for three years, giving users a hassle-free, zero-cost data recovery experience.

Helps protect data with prevention, intervention, and recovery recommendations to ensure peak system health.

Seagate's AgileArray technology provides dual-plane balancing, time-limited error recovery (TLER), and rotational vibration (RV) sensors to deliver top RAID performance in multi-bay environments.

Related Questions and Answers

Q: 1. How many hours are on these used drives?

A: This listing is for a new Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD. All of the items on our site are new unless marked otherwise.

Q: 2. The Heading is for 48TB, but the Overview says "the 24TB IronWolf Pro 7200". Could you please check?

A: The Seagate IRONWLF PRO 48TB 3.5" 7200RPM SATA HDD, B&H # SEST24000N2K, is a kit that includes two Seagate 24TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDDs, B&H # SEST24000NT2.

Q: 3. I intend to hook up 4 of these as part of a RAID 0 array to boost performance speeds while doing photo editing and graphics intensive work. Is this ideal for RAID 0, or are they better options out there? WD Black or Seagate Barracuda Pro perhaps?

A: These will work well.

Q: 4. Is this compatible with ds923+?

A: Yes, the Seagate 16TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR) is compatible with the Synology DS923+ 4-Bay NAS Enclosure, B&H # SYDS923.

Q: 5. Is it compatible with QNAP 473A?

A: This drive SEST16000NE0 is compatible with with a Qnap TS-473A.

Q: 6. What does CMR information means?

A: "CMR" on this Seagate 18TB IronWolf Pro 7200 rpm SATA III Internal NAS HDD (CMR) would be Conventional Magnetic Recording.

Q: 7. It is compatible with Synology DS920+?

A: Yes. The Seagate IronWolf Pro series drives are recommended for use in NAS enclosures such as the Synology DS920+.

Q: 8. can we mix seagate pros w seagate regular ironwolfs in a nas?

A: You can mix, but you would be limiting your self to the performance of the lowest spec drive and if in a Raid 0 or other striped raid array your level of safety would be reduced to the lowest drive.

Q: 9. Which single external enclosure with USB 3.2 handles this 22TB drive? And two bay enclosure handles same 22tb each in raid 0?

A: We do not have a single bay DAS enclosure that would support the Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD (CMR). The QNAP TR-002 2-Bay USB 3.1 GEN 2 RAID Expansion Enclosure (BH #QNTR002US • MFR #TR-002-US) would be able to support two of the Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD's (CMR) in RAID 0.

Q: 10. What NAS systems will work with these 22TB drives?

A: This Seagate 22TB IronWolf Pro 7200 rpm SATA III 3.5" Internal NAS HDD will work with any NAS that accepts 3.5" hard drives with a capacity of 22TB or more. That would encompass scores of options, far too many to list, so it is usually better to pick out a NAS first and the hard drives second.

Jamil	11/09/2024
Replaced 7 older drives by 2 new 14TB drives. Very happy with the results 5

Randall	22/08/2024
Upgraded from eight 10TB HGSTs to four Seagate 20TB drives. The Seagates are quieter and run cooler. They are also slightly faster. Problem free so far. For redundant bulk storage of large media files these disks can't be beat. 5

Thomas	11/08/2024
Does what it is supposed to do! 5

Gary	06/08/2024
I have been buying SEAGATE hard drives for over 20 years now. I have literally used them all but SEAGATE has never let me down. Their drives are built rugged and are beyond reliable. This is the largest single drive that they make and it does great for me because I film and edit 4K content and it gives me plenty of room for that. This is a must buy. 5

Dave	28/07/2024
I am very happy with this drive. It arrived quickly and works great in my Synology NAS. Performance is good, and the drive seems to be very quiet. 5

Conrad	19/07/2024
As an avid photographer it is quite easy for me to acquire terabytes of images. It's important to have a robust hard drive that can quickly pull images into post processing software. This Seagate 10TB NAS drive fits the bill. 5

Anatoliy	08/07/2024
I have just got one from BH. Warranty is Valid Until September 7, 2027 5

Joseph	21/06/2024
At least 50% faster copying 16TB IronWolf to 16TB IronWolf then my Seagate Baracuta8 TB that it replaces. Great price! 5

Philip	14/06/2024
The Seagate IronWolf drives provide added visibility into there condition from Synology NAS devices beyond my previous choice which was Western Digital Red drives. I'm not sure if Seagate has a deal with Synology to allow that, or if they just implement a feature that WD doesn't. In any case these drives are fast, have a 5 year warranty (Pro drives) and seem as quiet as my old WD drives. 5