The black/blue 7-in-1 Photography Jacket from Haukland is three separate layers that can be worn in seven different combinations. There are 27 pockets between the three jacket layers, including the mini photo bags. Each jacket can be worn separately as well as together, depending on the conditions you're in.

Waterproof Outer Jacket    Padded & Quilted Inner Jacket    Fleece Base Layer    Windproof, Rainproof, and Breathable    Microfiber Cloth Pocket in Each Jacket    3 Mini Photo Bags Included

The first layer of the 7-in-1 jacket can be worn alone on chilly fall or spring days. It is cut longer than most standard fleece jackets to help keep you covered and warm. The fleece fabric protects against light rain and moves moisture from the inside to the outside of the jacket. In heavier rain, you can zip this fleece layer into the outer jacket. You can attach both sleeves and the collar of this jacket to the outer jacket with eyelets and buttons.

This first layer jacket has eight pockets including five pockets in the mini photo bag. There are two large front pockets and one pocket in the left sleeve with an elastic strap and metal clip for a microfiber cleaning cloth. The mini photo bag in this layer is made from mesh.

The second layer of the 7-in-1 jacket is a padded, quilted jacket with a hood and a stylish checker design. This jacket can be worn by itself on chilly days without rain. It also zips into the outer jacket for an additional layer of warmth on cold and windy days. You can connect the hood and sleeves of this jacket to the outer jacket with buttons and eyelets. It is cut slightly longer than other padded jackets but doesn't show under the outer jacket.

This second layer jacket has eight pockets when you count the mini photo bag. There are two large front zippered pockets and one microfiber cloth pocket with an elastic strap and metal clip in the left sleeve. The mini photo bag has a waterproof film to protect your equipment in snow or rain.

The third layer of this jacket is lightweight, water and wind resistant with a rain column of 6000mm. It is made from tear-resistant 228T nylon-treated fabric. The interior mesh enhances the jacket's comfort and breathability while providing air circulation. The zippers under the arms provide extra ventilation if desired. Additionally, this outer jacket has a welded 2-way YKK zipper for extra water and wind protection. There are also elastic bands in the hood for a more secure fit and wrist wind stoppers to seal the jacket and prevent unnecessary heat loss. You can also tighten the sleeves with the hook-and-loop adjustment. The front side of the hood is cut longer to protect your camera and viewfinder in inclement conditions.
There are 11 different sized pockets throughout this jacket including the five pockets in the mini photo bag. There are two chest pockets designed to carry lens caps, two large pockets with hook-and-loop closures for filters up to 100x150mm or your Haukland 3-in-1 gloves, and an interior top left pocket for a slim wallet, your passport, or phone. There is also a left-sleeve pocket with an elastic strap and metal clip for your lens cleaning cloth.

Photographers have worn the Haukland 7-in-1 jacket from anywhere around 77 °F in the rainforests of Costa Rica to -4°F in Finland, as well as in winds over 100km/H.

• Layer 1 has 5 pockets, made entirely of mesh for comfort.
• Layer 2 has 5 pockets and a waterproof film so you can drop the jacket in the snow without exposing your electronic equipment.
• Layer 3 has 5 pockets with labeled memory card & battery pockets, plus two additional large pockets for drone batteries, power banks, and other accessories. This area is reinforced with a waterproof film on the exterior side to provide extra protection for your electronic equipment. On the interior side, the pockets are made of mesh.

Related Questions and Answers

Q: 1. Is the RB-1B (Black) bag the newer version with grey handles and grey suede shoulder straps? Or does it come with tan suede?

A: The RB-1B will come with grey handles and grey shoulder straps.

Q: 2. Does it fit EOS REBEL XSI?

A: No, the EH29-CJ body jacket is for the Canon EOS M5.

Q: 3. Are there dividers in the bag? If not, does Porta Brace make dividers to specifically fit this bag?

A: There are two sewn-in dividers that span the 7.0" width with a 12" divider in between.

Q: 4. Would this fit a 16 inch MacBook pro?

A: The K&F Concept Beta Photography Backpack (Blue, 20L) cannot carry a 16" MacBook Pro laptop computer.

Q: 5. Does the Peak Design Capture Camera Clip v3 fits?

A: Yes, the Peak Design Capture Camera Clip v3 will fit the K&F Concept Beta Photography Backpack (Black, 20L).

Q: 6. Does the magnetic system damage the laptop screen in the long term?

A: The Max Huggins Slipdrive (Small, Black) uses 3M adhesive (not magnets), so it shouldn't damage your laptop screen.

Q: 7. Is this bag made in the USA?

A: Yes, the Country of Origin for this product is the USA.

Q: 8. Do you have to fully detach the cover to use the camera or does it just hang down when open?

A: It just hangs down when open. No need to detach.

Q: 9. What is the weight of this backpack when empty please?

A: The K&F Concept Beta Photography Backpack (Black, 20L) weighs 1.75 lbs.

Q: 10. Can this bag hold a Canon C100 with a medium size lens attached?

A: The Canon C100 is a bit too tall for this bag.