Gain Control On Line Out Converter

Whirlwind Mix 7 Contractor Mixer

Product Code: ga13170
Availability: In Stock

$2,685.00 $3,490.50

Qty

3 reviews Write a review

Description
Reviews (3)

Whirlwind's Mix 7 Contractor Mixer is a versatile stereo mixer, combining four mono mic/line inputs and three stereo line inputs, in a compact, easy to use one rack space package. This mixer provides up to 76 dB of gain, professional quality signal to noise ratio and full frequency response. Designed for use anywhere microphone and music sources need to be combined, the Mix 7 is ideal for use in broadcast production, sports facilities and banquet rooms. Features include stereo/mono switching, a tone control on each of the mic/line inputs, two place master EQ, metering and a stereo/mono switch on the main outputs.

Parameters
Frequency Response	Frequency Response (Line) unity gain: ±.25 dBV 20 Hz - 20 kHz Frequency Response (Microphone) 40 dB gain: ±.35 dBV 20 Hz - 20 kHz
THD + N	Line Mode unity gain: <.0035% 20 Hz - 20 kHz THD + N Mic Mode 40dB gain: <.012% 20 Hz - 20 kHz
Equivalent Input Noise	-120 dBV
Rise Time	4.1 uSec
Total Gain	Microphone mode full gain: 70 dBV
Gain	Gain of Microphone Preamp: Microphone/Line switch (in) +32 dBV
Range	Range of input level pot: -63 to +20 dBV Range of master level pot: -70to +17 dBV
Common Mode Rejection	Input (Microphone): >63 dB
Maximum Input Level	Line +21 dBV; Mic -11 dBV
Input Impedance	Microphone: 1.3 kOhms Line: 8.8 kOhms
Isolation	Between input channels: Line at unity gain; 72 dB @ 1 kHz
Maximum Output Level	+26 dBV balanced
Output Impedance	200 Ohms balanced; 100 Ohms each leg
Noise	Unity gain: (Line) -88 dBV 40 dB gain (Microphone): -79 dBV
Dynamic Range	111 dBV
Control	Treble Control: ±15 dBV @ 16kHz, shelving Bass Control: ±15 dBV @ 20 Hz, shelving Tone Control: ±12 dBV @ 2 kHz, peaking
LED	Threshold: +18, 22 dBm bal; 16 dBm unbalanced + 8, 12 dBm bal; 6 dBm unbalanced 0, 4 dBm bal; -2 dBm unbalanced - 24, -20 dBm bal; -26 dBm unbalanced
Phantom Power	48 VDC
Power Consumption	0.13 Amps AC at 120 VAC maximum 0.09 Amps AC at 120 VAC minimum
Power Requirement	120 VAC 60 Hz
Mains	Internal Mains Fuse: .5 Amp Slo-blo type 3AG
Voltage	AC Dropout Voltage: 95 VAC
Inputs	4 x Mono Microphone/Line 3 x Stereo Line
Dimensions	1.75 x 19 x 6" (4.44 x 48.26 x 15.24 cm)
Weight	5.3 lb (2.4 kg)
Packaging Info
Package Weight	6 lb
Box Dimensions (LxWxH)	21.4 x 9.5 x 4.8"

Stereo/mono switching

Tone control on each of the microphone/line inputs

Two place master EQ

Metering and a stereo/mono switch on the main outputs

Related Questions and Answers

Q: 1. Could this fit an m32r?

A: Midas M32R mixer; Dimensions: 478 x 617 x 208 mm (18.8 x 24.3 x 8.2") Gator G-MIX Specs: Exterior Dimensions: 24.5 x 21.5 x 9.5" (62.23 x 54.61 x 24.13cm) (LxWxH) Interior Dimensions Rackable space: 21 x 19.25 x 6.5" (53.34 x 48.9 x 16.51cm) (LxWxH)

Q: 2. Will it fit for Allen & Heath QU24?

A: Yes, the Gator G-MIX 20X25 ATA Rolling Mixer Case will fit the Allen & Heath Qu-24 Digital Mixer.

Q: 3. Is it possible to use this product as an external sound card? Specifically, I'd like to use it to connect it to my computer through USB and use it to get sound from my computer to my studio monitors. Is this possible?

A: The ART USB Mix can be used to playback audio from your computer via USB through the mixer. With a single button the USB audio is routed through channel 2/3 and output via the main analog outs.

Q: 4. Getting static and interference noise. When I unplug USB it stops?

A: A comprehensive test of every device in your setup would need to be done to determine where the interference noise and static is coming from. You could be getting RFI (Radio Frequency Interference) through the computer or computer monitor. If the noise is a ground loop, you may try the EBTECH HUMX which filters out unwanted voltage and current in the ground line that cause ground loop hum, while simultaneously maintaining a solid, safe ground.

Q: 5. Do you place the wedge foam on the lid or underneath the mixboard? Also, the velcro seems to be weaker than the weight of my mixboard, anyone else have problems with the mixer flopping around and pushing past the velcro wedges?

A: The foam goes under the mixer. To the best of my knowledge I havent heard of any issues with the Velcro moving around. You might want to get a few pieces of foam and fill any space around the mixer so it wont move .

Q: 6. Is there a something that can be attached to hold a laptop?

A: There is no specific laptop holder designed for the GLORIOUS Modular Mix Station; however, we do offer some laptop stands that can be positioned on the center of the desk such as the Ultimate Support LPT-1000QR HyperStation QR 5/8" Thread-Mountable Laptop / DJ Stand with QuickRelease Center Post (Black), B&H # ULLPT1000QRB.

Q: 7. Can the inside rack in the Gator Cases G-MIX-12PU 12 Space ATA Pop-Up Mixer Case with Roller Blade Wheels and Pull-Out Handle be removed?

A: The gator G-MIX-12PU internal rack is hinged and riveted. The pop-up rack is not designed to be removed.

Q: 8. How much do the volume knobs attenuate the output signal? Can it reduce a line level signal to mic level?

A: The Radial Engineering MIX 2:1 2-Channel Audio Combiner & Mixer (BH # RAPSSM) cannot reduce a signal from line to microphone level.

Q: 9. When will this item be available for purchase? If I can know specific date, I will be able to pre order. Thanks.

A: We do our best to keep our site update with the latest information available to us. At this time Expected availability: Mid October 2016. You can choose to be notified by email when this item becomes available by clicking on the Notify When in Stock icon on the product page.

Q: 10. Can I control this with a single RS-1?

A: Yes, the Furman CN-15MP Contractor Series MiniPort (15A) can be controlled with the Furman RS-1 Maintained Contact Remote System Control Panel.

anyonymous	21/07/2024
I use this to play music over arena PA systems for kids hockey games. Works great as all we have available to us is an XLR mic, simply hook this up with an iPod/iPad and away you go. I always use it with a line out dock connector, NOT THE HEADPHONE JACK, and it works 100%. The gain adjustment on the line in is great for making sure the sound is not over powering. Excellent compact design. 5

Mr Sound	13/07/2024
I have been looking for a mini mixer to interface a 3.5 mm stereo source and a XLR mic input. This box is perfect! It is built well and sums both devices to a lowZ mic input and it has a Ground lift to boot. 5

Kevin	03/05/2024
I purchased this to boost the level of my portable keyboard in my monitoring system on my mixing desk. It is small and easy to use. Perfect for what I needed. 5