Blackmagic Converter Sdi To Hdmi

Gra-vue Mmio Hdmi To Dual Sdi Video Converter

Product Code: ga13213
Availability: In Stock

$596.85 $787.84

Qty

1 reviews Write a review

Description
Reviews (1)

The MMIO HDMI to Dual SDI Video Converter from Gra-Vue converts an HDMI input to two HD-SDI outputs pixel to pixel in up to 1080p HD. LED indicators confirm the status of the input signal and power supply.

Pixel-to-Pixel HDMI to Dual HD-SDI Supports Up to 1080p HD LED Status Indicators Screw-On Power Supply

Parameters
Input	1x HDMI, type A, female
Supported Input Resolutions	1920x1080, 1280x720
Output	2x HD/SD-SDI on BNC, 75 ohm, 800mV±10% level, <0.2UI (100 kHz) jitter SMPTE-259M-C 270 Mbps SMPTE-292M 1.485 Gbps SMPTE-425 2.970 Gbps
Selectable Output Formats	720p 50/59.94/60, 1080i 50/59.94/60, 1080p 50/59.94/60
Power	12 VDC, 1A
Dimensions	3.8 x 2.5 x 1.1" (9.67 x 6.5 x 2.8 cm)
Packaging Info
Package Weight	0.85 lb
Box Dimensions (LxWxH)	7.5 x 4.5 x 2.9"

Related Questions and Answers

Q: 1. does include the power supply?

A: Yes, the attached power adapter is included in the box.

Q: 2. Hello, Can the Gra-Vue MV10 delay embeded Audio /SDI Video ?

A: It is our understanding that yes, this device will do what you wish to do.

Q: 3. Does this take 7.4v power in only(like the zcam body), or it can take 14.8v dc in? thx

A: This unit will handle 6.8 to 16.8 VDC in.

Q: 4. Muist the output match the input, or are there options to change it? For example, the input would be 1080P 25pfs, but I want the output to be 1080i 60 fps.

A: This input and output will have to match. This product is not a frame rate and standards converter.

Q: 5. Is a D-tap cable available to power the Roland VC-1-HS HDMI to SDI Video Converter?

A: no unfortunately there isn't a DC power solution for the Roland VC-1-HS HDMI to SDI Video Converter

Q: 6. Are these Converters Rackmountable?

A: no, it is not rackmountable.

Q: 7. Hi someone bought it for atem studio televison? Thanks

A: Yes, this product is compatible with the Blackmagic ATEM Television Studio switcher. It will convert two analog sources into AES, which is the input accepted by the switcher.

Q: 8. With this adapter allow 12-Bit ProRes RAW recording over HDMI to a monitor-recorder?

A: The Z CAM HDMI to SDI Converter is an HDMI to SDI converter, and is intended to take the HDMI output from Z Cams and convert it to an SDI 3-G format. If you want to record 12-Bit ProRes RAW from your Z Cam we recommend using your camera's HDMI output to send a feed to the Atomos Ninja V.

Q: 9. Will this work on cameras other than the z-cam? Or is it proprietary?

A: This is for Z-Cam only.

Q: 10. Does the power in, power the unit and the camera if it mounts to the battery sled?

A: No it can not. however you can use the DC out on this converter to feed power into the camera via an additional power cable.