The Kelvin Epos 300 RGB LED Monolight from Rift Labs is a 300W-equivalent LED monolight with power control that regulates its output to an accuracy of 0.1%. It is made with a meticulous attention to detail to ensure it outperforms expectations, in both still and video applications. It is built around the Cantastoria Engine, which doesn't use any white LEDs. Instead, it utilizes red, green, blue, amber, cyan and lime, resulting in an infinite color palette of precisely mixed light. The RGBACL light engine design provides a larger CCT range and can produce more saturated colors with more output compared to RGBWW lights. This broad color control range provides both gel effects and customizable lighting effects for added versatility, to suit any lighting requirement. The light head features a 6mm solid aluminum housing that exceeds structural requirements, that better conducts heat away from the light, and it is stronger than creaky plastic. It features a classic Bowens S reflector mount, making it compatible with a wide range of available light modifiers.

The Controller box offers a combination of 5" touchscreen LED analogue controls, and allows the Epos 300 to be controlled remotely using the free to download Kelvin Narrator app for iOS or Android. It also provides wired DMX and Lumen Radio wireless DMX control options. It supports multi-voltage operation for worldwide use, and incorporates dual B-Mount battery plates for use in locations where power mains are unavailable. Note: B-Mount batteries and battery chargers are available separately.

This kit includes an Epos multifunctional rolling case made of durable ballistic nylon. It features rubber wheels, a tow handle, padded internal dividers, and an ID pocket.

Light, Travel Case, Diffusers & Dome    Includes Umbrella Mount    Output: 9031 Lux at 3.3' (5600K)    1700 to 20,000K; RGBACL Control    B-Mount/Multi-Voltage AC Operation    Onboard, DMX & Bluetooth Control    CRI 98 | TLCI 99 | CQS 97 | SS1 86    CCT, HSI, RGB, Gel & Lighting Effects    Hybrid Fan Cooling    Includes 55° Reflector & Controller

• 300W full-spectrum LED COB studio light
• Cantastoria full RGBACL six-color light engine
• 1700 to 20000K CCT color temperature range
• 0–100% continuous dimming
• Bluetooth operation with Kelvin Narrator App
• Integrated DMX, Lumen Radio/Wireless DMX operation
• Bowens S mount compatible
• 6mm aluminum housing
• Includes a durable water resistant semi-soft rolling case

• 5" TFT LCD display with touchscreen and buttons
• AC Input Power: 110 to 240 VAC, 50/60 Hz
• 2 x B-Mount battery plates
• 4-pin head cable, 16.4 ft / 5M
• Neutrik Power CONTRUE TOP AC power cable, 16.4 ft / 5M

Related Questions and Answers

Q: 1. What is the difference between the Play Pro and the Play models?

A: The Kelvin Play Pro RGB LED Light Panel has DMX control built-in. the Play only has Wii-Fi app control.

Q: 2. This is strong enough to be used in a book light set up?

A: Yes the SmallRig RC120B Point-Source Variable Color Temperature Video Light would be strong enough to be used as a main light in a book light setup.

Q: 3. Is there Artnet support?

A: No, the Kelvin Epos 300-V only offers the following connectivity. Bluetooth *Power Supply/Controller Required (Included) Wireless DMX (LumenRadio) *Power Supply/Controller Required (Included) Radio/RF

Q: 4. I've been interested in switching over to continuous lights for my studio portrait photography (mainly headshots and adult portraits). Right now I use 300 Watt lights which is more than enough power for my work. Can these lights match the power of 300 watt strobes? Are these lights good for studio portrait photography?

A: Continuous LED and strobes work very different. And strobes have a much longer fall off than LED lights. So strobe light will go further. So depending on the distance of the light will be brighter. The Nanlite FS-300 AC LED Monolight is 36,730 Lux at 3.3, which is very bright. And Max Power Consumption 330 W. Comparing it to 300 watt quartz light it is brighter.

Q: 5. I see that a v mount battery plate comes with the kit, does the v mount have a clamp on it so it can be clamped onto a light stand?

A: Yes, the SmallRig RC 120B Bi-Color LED Monolight (2-Light Kit) has a V-mount that includes a clamp for attaching it to a stand.

Q: 6. Light of the FS series and the Forza series have the same color temperature? If they are used together on set, there will be no color difference?

A: The Nanlite FS-300 Daylight LED Monolight is 5600K like the Forza line, but each does have a CRI rating that is a bit different. This means that they might not match exactly, but they will be close.

Q: 7. Does it come with a stand for each light?

A: No, the SmallRig RC 120B Bi-Color LED Monolight (2-Light Kit) does not include stands.

Q: 8. Are there any leko or fresnel accessories that fit this light?

A: You can use the BH #APF10F with the Kelvin Epos 600 RGB LED Monolight (Travel Kit with Accessories) BH #KEPOS600LK1.

Q: 9. The first review of this I have seen says the fan noise is so loud its unusable if recording sound. Why do you list it in the answers as silent ?

A: The Nanlite FS-300 Daylight LED Monolight does have some fan noise. Most do not seem to have issues with it when recording sound. It will depend on how far the light is from the mic.

Q: 10. Can this light be powered from the new Small Rig VB50 or VB99 v mount batteries?

A: The SmallRig RC120D is best used with the SmallRig VB155 Mini V-Mount Battery (155Wh), BH # SM3581 due to the higher power consumption of this lamphead. https://bhpho.to/3XxIapV