The Backpack Camera Straps from PGYTECH can be attached to the loops on your backpack straps for hands-free camera carrying. These straps are compatible with a variety of backpacks. They are made from strong and durable webbing and have strong quick bead connectors. The loop on the connectors is made up of three layers of UHMWPE which can support up to 198 lb. The loops' three layers include an outer wear-resistant layer, an inner replace warning layer, and a load-bearing core. The bead connector stays locked unless the upper part of the connector is pressed. Adjust the strap's length quickly with one hand by using the quick adjusters. Both connectors are magnetic and can be fixed to each other when not carrying a camera.

Compatible with a Variety of Backpacks    Quick Release Bead Connectors    Quick Length Adjusters    Connector Loop Holds up to 198 lb    Connectors are Magnetic

Related Questions and Answers

Q: 1. can it fit a Sony Venice body in Rialto mode?

A: Yes, the PGYTECH Backpack for DJI Ronin 4D can fit a Sony Venice body in Rialto mode inside it.

Q: 2. will this fit Sony A7R IV, 100-400 mm lens, 50 mm lens, 18 mm lens and dji mavic air2s with controller and batteries?

A: The 18L compartment in the PGYTECH OneGo Backpack (Deep Navy) does provide enough space depending on how one positions the dividers and orients the products.

Q: 3. how large a laptop can onemo2 carry?

A: The PGYTECH OneMo 2 Backpack's (Space Black, 35L) laptop compartment can support laptops that are 17.7 x 12.2 x 1.2" or smaller.

Q: 4. Can it fit the nikon z 600mm TC with all the dividers and shoulder bag removed?

A: The PGYTECH OneMo 2 Backpack (Space Black, 25L) could fit the Nikon NIKKOR Z 600mm f/4 TC VR S Lens (Nikon Z) with all dividers removed, but would potentially need to be stored at an angle.

Q: 5. Do these straps accommodate the use of a Peak Design capture clip?

A: It would be a bit of a tight fit, though it is possible. Shimoda has a video showing how to mount the Capture on the Shimoda Plus Strap. You can see the video here. https://bit.ly/2OMCg62. This should give some idea on how this can be done.

Q: 6. Can you fit a fully built Ronin 4D in this bag, so pull it out and start shooting or does it need to be disassembled?

A: The PGYTECH Backpack for DJI Ronin 4D is made for carrying the components of the 4D. You need to assemble the camera on set. Carrying a fully built 4D in a back pack would necessitate a much bigger, more expensive bag that likely would not fully protect the delicate gimbal.

Q: 7. Is it possible to fit mavic air2s vertically in the backpack? I know it's longer officially than the 15cm,

A: The PGYTECH OneMo 2 Backpack (Space Black, 25L) could store the DJI Mavic Air 2S with some rearranging of the interior dividers.

Q: 8. Hi. I talked earlier today to Steve, who said that the dimensions to this bag are 43.3 X 11x 5.5 inches. However, here on the B &H website, if you click on Question 2, it says the dimensions are 43.3 X 9.5 X 3.7 which is exactly what I want. Which is accurate?

A: The manufacturer's specifications show that the external dimensions of the Dexibell Vivo S1 Padded Bag with Backpack Straps are 46.1 x 12.2 x 5.9" (1170 x 310 x 150 mm) and the internal dimensions are 44.1 x 11.2 x 4.3" (1120 x 285 x 110 mm). The bag weighs 6.7 lb (3.05 kg).

Q: 9. Can the bag be configured to hold a Fuji XT3 w/battery grip and Fuji 150-600 attached (lens hood reversed)?

A: Yes, the PGYTECH OneMo 2 Backpack (25L) can be configured to hold a Fuji XT3, battery grip, and Fujifilm 150-600mm.

Q: 10. Cab I use these straps on a 35L Adventure V2 pack?

A: Yes, the Shimoda Designs Plus Backpack Straps are compatible with the Explore v2 35 Backpack.