The 5-Port 10/100BASE-TX Industrial Unmanaged Ethernet Switch from EtherWAN features an ultra-compact form for limited spaces. It's designed for easy deployment in harsh environments. It features five Fast Ethernet copper ports, or a combination of four Fast Ethernet copper ports and one Fast Ethernet fiber port for long distance connectivity.

The switch offers 10/100 Mb/s transfer speeds, full/half-duplex auto-negotiation, and auto MDI/MDIX operation, allowing for fast and hassle-free connection and setup. Other key features include full wire speed Fast Ethernet throughput, QoS, broadcast storm protection, IEEE 802.3az EEE (Energy Efficient Ethernet), and 4kV surge protection. The switch can be DIN rail mounted, and its compact size makes it an ideal solution for factory floors, warehouses, and locations without climate control.

Four Fast Ethernet Copper Ports    One Fast Ethernet Fiber Port    Full/Half-Duplex Auto-Negotiation    Broadcast Storm Protection

Related Questions and Answers

Q: 1. how long is the power cord, need a power strip with a 25 ft board?

A: The cable length for this unit is 14.5 ft long.

Q: 2. Does this protect from gray outs?

A: This is a surge protector, it does not have a built-in battery and cannot protect against low voltage issues. It also cannot protect against slightly higher voltages, only sudden surges. That's why they call it a surge protector, not a power conditioner.

Q: 3. does this have wall mount holes on the back?

A: Yes it Has two of the them Left and Right sides. with a tri fit meaning: you can lock in 3 different angles 1. top 2. Bottom,3. one side.

Q: 4. 20 amps rating?

A: Nope its only rated for 15 amp. If it was rated for 20 amps the plug would be made different

Q: 5. Is this a remote office's gateway for internet access? Is that the intended use or for end client AP access to bridged corp LAN

A: This EtherWAN Hardened Wireless Bridge Kit 1+6 is designed to wirelessly bridge a network to up to 6 remote locations up to two miles away, line of sight, from the EasyLink base unit.

Q: 6. Do all of the outlets face the same direction? If so it would seem that if you're using a lot of wall warts (with three prongs) that the top three would block the bottom three from being able to plug in anything.

A: Yes, the Furman SS-6B Power Pro Plug 6 Outlet Block B&H # FUSS6B outlets all face the same direction. It is possible that some of them could be blocked if you are plugging in adapters that are large and have to face in that specific direction.

Q: 7. Are the outlets spaced far enough apart so that I could squeeze a couple of wall warts in there along with some regular sized plugs?(what is the distance between adjacent outlets)

A: The spacing is decent, enough for a wall wart and a plug, but not two wall warts directly side by side. I had wall warts plugged in on the ends with normal plugs in the centers.

Q: 8. where made?

A: This product is made in China.

Q: 9. what is the length of the cable ?

A: The cable for this unit is a little over 14.5 feet long.

Q: 10. what is the clamping voltage for the furman ss-6b?

A: That detailed information is only available by calling Furman directly. It's a fine general use surge protector but if you wanna protect your gear, step up to Surgex