Use this circular Bluetooth Focus Controller from PDMOVIE to control fine lens focus with a separately available PD-BTMP motor using Bluetooth from up to 328' away. This compact focus controller mounts onto your cage or rig using a 1/4"-20 screw, and it provides A/B stops, gear direction control, automatic calibration, and it can even be switched to zoom mode to be used as a zoom controller. The controller is powered using a replaceable, rechargeable LIR2477 Li-ion battery.

Wirelessly Control Lens Focus via LiDAR    High-Power 1Nm Smart LiDAR Motor    Bluetooth Focus Controller, USB-C Cables    REMOTE AIR RIG Handwheel Unit    Shoe Mount Adapter, 15mm Rod    Lens Gear Ring, Mounting Clamp    Combination Battery Charger & Batteries

Related Questions and Answers

Q: 1. Can the DJI Focus Pro Lidar be used with the DJI Focus Pro Grip only? I have a DJI RSC2 but want to use it without a gimbal.

A: The DJI Does not support the RSC2 gimbal. But you could consider the Focus Pro handle kit which will will work as a stand alone solution, no gimbal required. DJI Focus Pro Creator Combo BH #DJFPCC • MFR #CP.RN.00000404.01

Q: 2. Does this have an internal, rechargeable battery?

A: No, the DJI Focus Pro LiDAR does not have an internal, rechargeable battery.

Q: 3. Is there alternative mounting brackets? Eg to attach 1/4-20 from below? Or 15mm rod four so the rod is above the lidar

A: The DJI Focus Pro LiDAR, with its cold shoe foot, can be alternatively mounted. Here is a possible mount: the Niceyrig 15mm Rod Clamp with Cold Shoe Mount (B&H # NI426). You need to get the DJI Focus Pro LiDAR close to the lens plane.

Q: 4. How well would this work with an 85mm lens?

A: The PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit (Basic) works very well with most focal lengths, including 85mm.

Q: 5. Will this system work with the DJI Ronin 4D?

A: The DJI Ronin 4D has its own Lidar system and follow focus built into the camera. It has not been testes and would be redundant.

Q: 6. Is there any cable longer than 300mm to power it via focus pro grip? The supplied cable is 300mm and is too short

A: USB-C cables top out at 16.4' in regard to powering devices. To go further than this you will need to use a USB-C cable with fiber optics.

Q: 7. The DJI Focus Pro LiDAR is compatible with Cinema Lens only?

A: The DJI Focus Pro LiDAR was designed to be used with cinema lenses, but it could also be used with electronic focus photo lenses when using the DJI Follow Focus Pro Motor (https://bhpho.to/4hg1BNY) and the included DJI Focus gear strips.

Q: 8. Can one turn on/off auto focus without first focusing at minimum focus?

A: The PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit PDL-AFX-S/PDL-AFX-RA-S must rotate the controller to the position where it stays to activate or cancel autofocus. Therefore, PD Movie generally recommends that users only set 4 autofocus lens data, leaving a blank channel for pure manual wireless control, which will not be interfered by the controller staying at the position of the nearest focus point. If you want to switch between manual and automatic control through button commands on the controller, or motor, it is not possible. In essence, it also does not support completely seamless switching between manual and automatic. In addition, there is a new model being release PDL-AFX-RA-SP next month which is a purely manual wireless control mode, which can be set independently.

Q: 9. Will this item work with the new Panasonic Lumix S5D in AF mode?

A: Yes, the Panasonic Lumix S5D adds compatibility for the DJI Focus Pro LiDAR autofocus to the camera.

Q: 10. Can the motor reversed to work with Nikon F lenses?

A: During the calibration process, the PDMOVIE LIVE AIR 3 Smart LiDAR Wireless Focus Lens Control Kit will determine the direction of the gearing.