Whether deployed as a transmitter (Encoder) or receiver (Decoder), the AVPro Edge MXNet 10G SDVoE Transceiver serves as both a gateway and destination point for the next generation 10G lineup of AV-over-IP multicast offerings from AVPro Edge. It features a maximum range up to 328' using a single twisted pair Cat6a cable, it also sports a maximum range up to 18.6 miles using single-mode fiber, through industry standard SFP+ modules. With zero frame latency, zero image artifacts, zero compression up to 4K/30fps 4:4:4 8-bit, and supporting HDMI 4K/60fps 4:4:4 8-bit (1/150th of a frame latency); 4K/60fps 4:2:2 10-bit, and 4K/60fps 4:2:0 12-bit, are transported visually lossless with a pixel-perfect light compression of 1.3:1.

HDMI 2.0    18 Gb/s Bandwidth Support    Dual-10GbE Ports, Copper or Fiber    Multi-View Support

Related Questions and Answers

Q: 1. In my Canon 70D, transceiver on the hotshoe does not trigger flash if Viewfinder LCD of the camera is ON.If I turn off the LCD and look through eye piece view finder, everything works fine.Is this a bug?

A: I don't know the 70D, but I imagine you have the camera set on some sort of Live View setting used for video or pre-shot composition. The transceiver should NOT fire when you are in this mode because no traditional photo is being made as long as the LCD is in viewing mode.

Q: 2. Do you have CE version instead of FCC in stock? thanks!

A: Unfortunately not. The only PocketWizard units sold in the USA are of the North American (FCC) frequencies.

Q: 3. can I use with a pocketwizard plus2 ???

A: Yes, the Plus 2 is fully compatible with the Plus X.

Q: 4. Does the PocketWizard Plus X transceiver come with the right cable that can be plugged in a Nikon SB910 flash? It seems to me the cables are not the right ones but I might be wrong. If not, which cable/accessory should I purchase?

A: The Plus X Transceiver does comes with a miniphone to PC male cable, which will plug directly into the sync terminal on the SB-910, as well as any Nikon flash with the same sync terminal.

Q: 5. Can this Pocketwizard PlusX be used with Canon 70D and speedlite 430EXII as both a shutter trigger and also as flash trigger simultaneously and separately?

A: This product is a transceiver. Yes, it can be used as a flash trigger, a remote flash receiver, as a repeater to increase the signal distance or as a transceiver to simultaneously receive a shutter release command and synchronize a remote flash with the shutter. It can function as a flash trigger or shutter release trigger as long as you have 2 units. To trigger the shutter remotely and trigger an off camera flash you will need 3 units.

Q: 6. Can you transmit from the camera (with out using the hot shoe) to two off camera flashes? I want to put an on-camera flash on and have the option to use it or not to use it yet have the other two off-camera flashes trigger.

A: As long as your camera has a PC sync port, you could hook up the Plus X to your camera with the included PC cable instead of using Plus X on the hot shoe. If your camera doesnt have a PC sync port, you would need to purchase a hot shoe adapter with a PC connection.

Q: 7. Will this transceiver fire my Fuji XPro1 with my 2 canon FlexTT6 using Canon 430EXII and 580EXII?

A: No, you may not use the PocketWizard PlusX Transceiver to wirelessly trigger the shutter on the Fujifilm X-Pro1 Mirrorless Digital Camera. A motor drive cable is required to use a PocketWizard transceiver to trigger a camera's shutter, and the Fujifilm X-Pro1 does not have an electronic remote terminal for use with a motor drive cable. It only has the threaded socket in the center of the shutter button for use with manual threaded shutter release cables.

Q: 8. Can i use this on my Nikon D7100, with the second transmitter on my dynalite battery pack, acting as a receiver?

A: If your Dynalite battery pack has a PC sync or household sync terminal designed for use to trigger your light kit, then yes, the PocketWizard Plus X Transceiver can be used on your equipment with the appropriate sync cable. The PocketWizard Plus X will fit into the hot shoe of the Nikon D7100 DSLR camera and would then be able to trigger the lights connected to the second Plus X wirelessly.

Q: 9. Does this unit work with Sony A7/R/S? Do I need an adapter to connect it to my camera?I don't mind to deal with manual flash, I only need to trigger the flash.Thanks

A: Yes, the PocketWizard PlusX Transceiver is compatible for use with the aforementioned cameras. No adapter would be needed to connect the PlusX Transceiver to the hot shoe on the top of your camera.

Q: 10. will this work with Profoto Acute 1200 2R and any camera system_?

A: Yes, the Pocket Wizard Plus X can fire the Profoto Acute 2 1200R from any camera system.