The MXNet 1G Evolution II Weatherproof Decoder from AVPro Edge receives and decodes video and audio signals at resolutions up to DCI 4K60 4:4:4, along with control, power, and HDR metadata. This decoder features a sealed and tested IP68 weatherproof design with a Sealoc nano-coating. It supports HDMI 2.0, HDR10, HLG, and Dolby Vision up to 30 Hz and is designed for use with an MXNet switch or a multicast capable L3 switch and with Cat 6A cable or with SFP fiber for longer runs. It features a new AVPro Edge ASIC (application-specific integrated circuit) for enhanced video processing and support for audio formats like Dolby Atmos and DTS:X for IMAX Enhanced soundtracks.

Weatherproof Design with Nano-Coating    Sealed & Tested Chassis, IP68 Rating    1G Decoder/Receiving Device, HDMI 2.0    Supports up to DCI 4K60 4:4:4 Video    Supports HDR 10, HLG & Dolby Vision    New ASIC for Improved Image Fidelity    Requires an L3 Multicast/MXNet Switch    Uses Cat 6A or SFP Fiber for Long Runs    Uses Optimized JPEG 2000 Codec    Compatible with NetGear Switches

• The Sealoc nano-coating creates a durable, waterproof protective layer.
• Protects delicate electronics against the elements.
• Guards against water, moisture, humidity, dust, salt air, and corrosion.
• The sealed chassis is rated IP68.

Related Questions and Answers

Q: 1. I have an AXIS P5655-E Network Camera, can I put in the IP of the camera into the NVD-35 and it can decode to SDI?

A: Yes, as long as the encoded signal coming in via IP is among those supported by the device.

Q: 2. Does the SDI video output included Closed Captioning data (708)?

A: No. The SDI video output will not carry "CC" data.

Q: 3. will this work on a nexstar 5se ? i live in a low altitude my wedge only goes as far as 20deg. i'm at 10.55deg

A: Yes it will, the mount bolt spacing is identical among the 4SE/5SE and 6SE/8SE. The tripod should support this wedge just fine. Just be sure to keep its built-in wedge perfectly flat.

Q: 4. Can I use them for iem receivers? How long can I extend the antenna with a bnc cable? Thanks

A: Yes, the Sennheiser A 1031-U Omnidirectional UHF Antenna for Evolution Series could technically be used for IEM applications, although it is not ideal. The Sennheiser ADP UHF Passive Directional Antenna for EW-D Wireless Systems (BH #SEADPUHF4701) is more ideal for this application. BNC cable can be used in lengths up to 100 feet or more, but will experience some level of loss over long runs depending on the type of cable used.

Q: 5. Does this device have a built in RTMP server?

A: This supports RTMP protocols, but it does not have a server built in to it.

Q: 6. If using these for an ASA 1 Active Antenna splitter, should you purchase two?

A: Yes, you need two antennas. Think of the splitter as a dual channel device. It will combine all the A channels from the individual receivers into one antenna and all of the B channels into a second antenna.

Q: 7. can use this for transmitting device (In ear monitor)?

A: Yes, the Sennheiser A 1031-U Omnidirectional UHF Antenna can be used with Sennheiser G4 IEM transmitters.

Q: 8. Do I understand correctly that this bag that has "waterproof" in the title isn't actually waterproof?

A: Not correct. the following bag is Water-Resistant featuring a Nylon Shell. But cannot be submerged in water.

Q: 9. Does this work with the 9.25?

A: No, the Celestron HD Pro Wedge is the one that will work with the 9.25 and it's tripod.a href= http://www.bhphotovideo.com/c/product/726918-REG/Celestron_93664_HD_Pro_Wedge.html target= _blank http://www.bhphotovideo.com/c/product/726918-REG/Celestron_93664_HD_Pro_Wedge.html/a

Q: 10. Can the NVD-35 Mark II decode up to 4 pairs of audio (8 channels) via the HD-SDI embedded output in SRT mode?

A: No, the Datavideo NVD-35 Mark II Streaming IP Video Decoder with SDI Output can only output up to four channels of audio via SDI.