Power your Canon camera, such as the R6 or R5C, with a USB-C PD source using this USB-C to Canon LP-E6 Dummy Battery with PD Fast Charging from DigitalFoto. The dummy battery can also power accessories like external monitors or fill lights with separately available battery plate adapters. It is fully decoded so it will operate just like a Canon brand LP-E6 battery.

The cable regulates its voltage from 9-20V to match the voltage of a typical LP-E6 battery. The 19.7" USB-C cable plugs into a separately available PD/QC fast charging power adapter, and it also supports Samsung AFC and Huawei FCP protocols.

Power LP-E6 Camera or Accessory    USB-C Cable to LP-E6 Battery    Fully Decoded Dummy Battery    Supports QC/PD/FCP/AFC Fast Charging    Compatible with USB-C 9-20V PD Adapters    Cable Measures 19.7" in Length

Cameras and gear that require an LP-E6 battery, including but not limited to the following Canon cameras:

• EOS 5D Mark IV, 5D Mark III, 5DS, 5DS R, 5D Mark II
• EOS 6D Mark II, 6D
• EOS 60D, 60Da, 70D, 80D, 90D
• EOS R, R5, R6

Related Questions and Answers

Q: 1. Will this allow my camera to run while it's plugged in? I'm looking to leave it charging while I'm streaming

A: The GyroVu USB to Canon LP-E12 Dummy Battery Cable (40") doesn't charge the camera whatsoever, it is meant to power not charge, externally.

Q: 2. Will this work with the canon m50 mirrorless camera?

A: Yes it will as the M50 uses Canon LP-E12 style batteries.

Q: 3. Will this work with a Canon 5D Mark IV that takes LP-E6 batteries?

A: Yes, the GyroVu USB to Canon LP-E6 Dummy Battery Intelligent Cable with 3.1A Power Supply works with the Canon 5D Mark IV.

Q: 4. Will this work for the Canon R5C or R5II while providing enough voltage to run all features/ functions?

A: No, the Canon EOS R5C Mirrorless Cinema Camera and Canon EOS R5 Mark II Mirrorless Camera require USB-C PD power to gain all recording capabilities.

Q: 5. Could I use it to power my Canon R6 with my tilta side handle with the NP-F power battery ? I would use cable 12V DC to USB-C.

A: I would not recommend that, as the power output may me too great and damage your camera. The DigitalFoto Solution Limited USB-C to Canon LP-E6 Dummy Battery with PD Fast Charging is designed to work with USB-C PD power supplies, and as such, the PD of the power supply would regulate the voltage, so we can not say with any certainty that if you were to use a 12V power source that the battery would regulate the voltage to the correct power leve for the camera.

Q: 6. I've tried the GV-USB-LPE12 with a few different power sources but no combination works with my Canon M200. Is there a specific input power requirement? I've tried 5V 2A as well as 9V 1.67A

A: Dear John, Usually complains like this are related to insufficient power provided to the adapter cable. You camera is required certain level of current to function properly. To provide that at least 2.0 Amp USB power source has to be used for the adapter cable. Usually computer USB ports are limited to 1.o Amp. The power banks and USB power supplies if not specified are usually providing 1.0 Amp outputs. You need to used power source with SPECIFIED 2.0 Amp output from reliable manufacturer for adapter to function properly. Please check specifications of the power source your are planning to use with this cable. Recommended GyroVu power banks: GV-PB-301 https://www.gyrovu.com/product-page/high-capacity-30-000-mah-power-bank GV-PBID-401 https://www.gyrovu.com/product-page/high-capacity-40-000-mah-power-bank-with-110v-inverter In case if you will not able to make it working properly we can provide you with RMA ## for return.

Q: 7. Does this provide the higher voltage to run the r5c at 8k60 raw?

A: Yes, the IndiPRO Tools D-Tap to Canon LP-E6 Type Dummy Battery for R5 C Cameras is sufficient for 8K60P RAW on the Canon EOS R5C.

Q: 8. Is the D-tap standard size? Why is it called mini-tap?

A: Yes, the D-Tap is the standard size. We call this line Mini-Taps to differentiate from our Standard D-Tap Cables. These Mini-Tap cables all feature an additional Female D-Tap output on one side and the other has a built in 5V USB interface for charging various electronic devices.

Q: 9. Does this battery have a regulator in it? I want to use a 12v power source.

A: This is an Intelligent Battery Adapter, it will regulate the power as needed. However this device is for use with batteries that have a D-Tap Port on them. If you need further assistance finding the proper adapter for your needs feel free to email us directly at provideo@bhphoto.com.

Q: 10. Will this power the Blackmagic Design Pocket Cinema Camera 6K/6K G2?

A: Yes, the Kondor Blue D-Tap to Canon LP-E6 Dummy Battery Cable (Kondor Blue, 16-36") is compatible with the original Blackmagic Design Pocket Cinema Camera 6K (Canon EF/EF-S) but incompatible with the Blackmagic Design Pocket Cinema Camera 6K G2 since that camera uses Sony NP-F style batteries.