The Beachtek BT-35 is a cable designed to provide a premium interconnect between the line output of your DXA-PRE preamp and any cinema camera with a 3.5mm TRS audio input including the RED DSMC2. The 18" high-quality, Van Damme Pro Grade cable features a 5-pin mini-XLR female connector on one end and a gold-plated, Neutrik right-angle 3.5mm TRS male connector on the other.

DXA-PRE to Camera with 3.5mm Audio Input    Compatible with RED DSMC2    5-Pin Mini-XLR Female Connector    Right-Angle 3.5mm TRS Male Connector    Gold-Plated Neutrik Connector    Length: 18"

Related Questions and Answers

Q: 1. Does it work with other cameras like the blackmagic pocket cinema camera?

A: The Beachtek BT-MINI XLR5F to Right-Angle 3.5mm TRS Adapter Cable does not have the proper connectors to support connectivity to the Blackmagic Pocket Cinema camera line.

Q: 2. Can this be used to send signal from 1 microphone (like Rode VideoMicro) to 2 recorders (like Zoom F1)? If yes - then how the recorders' "plug-in power" should be set? 1 On, 1 Off? Both On? Does it matter?

A: I would not expect that plug in power will work at at all.

Q: 3. Tried using with Rode Wireless Go mics, but sounds is only being picked up from one mic (black side). Is there any way to fix this?

A: This cable : Rode SC11 Right-Angle 3.5mm TRS Y-Splitter Cable (10.9") BH #ROSC11 Is a "Mono to Stereo cable". It is designed to take two Mono signals and split them to the Stereo input of a camera If you do not have two, discreet or independent Mono signals, fed into the two 3.5mm connectors, separately, as Mono signals into each connector, you will NOT get both Left and Right to the destination.

Q: 4. How long is this cable. The description says upto 31.5" but the picture looks like it will barely go 12". Anyone know for sure?

A: The BeachTek SC25 3.5mm to 2.5mm TRS Output Cable is approximately 12" when compressed and it extends to 31.5" when fully stretched.

Q: 5. Hi, Does this adapter come with the clip that goes around the middle? I don't see it on the pics...

A: From what I see on Rode's site, this does not come with any belt clip. For an adapter that does, I would recommend the Deity #DEDXLR, which also does the same job.

Q: 6. Hello. I have the f3 zoom. Is this adapter necessary with phanton power??? because the f3 has the option to give phantom power. I don't understand very well what it would be used for

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter would be used when you have a lavalier microphone with a 3.5mm connector, and you want to connect it to an XLR input. Lavalier microphones require a certain type of power, which is different from the 48v phantom power provided by XLR audio recorders. This adapter can convert that 48v phantom power to the special plugin power the lavalier needs. Compatibility will depend on the specific model of your lavalier.

Q: 7. Does this work with the Sennheiser MKE2 Gold EW lapel mic?

A: Yes it will.

Q: 8. Does this cable work between a Panasonic GH4 and a Beachtek MCC-2 adapter? Thank you.

A: The GH4 will have a3.5mm mic input unlike the older Lumix cameras. The SC25 will not be necessary. The standard 3.5 jack will work, the SC35 which is available separately, but included with most Beachtek products including the MCC-2 a href= http://bhpho.to/1C8lNYP target= _blank http://bhpho.to/1C8lNYP/a

Q: 9. Will this cable record two mics into one camera and keep each a distinct channel for editing each seprately? If not, what cable?

A: The RODE SC11 Right-Angle 3.5mm TRS Y-Splitter Cable (10.9"), BH # ROSC11, connects two mono outputs to a stereo input. It is designed for connecting the mono outputs of two devices such as camera-mount microphones or wireless receivers to the stereo input of a mirrorless camera, DSLR, or camcorder. It is wired to send each connected source to a separate, distinct channel rather than summing them to mono.

Q: 10. Looking for cable to connect the Vello Freewave Wireless Shutter Release to my FujiXT-2. Vello receiver sized for 2.5mm. XT-2 has 2.5mm or 3.5mm available. Will this work for this application?

A: Take a look at the camera's manuel, if the 3.5 is for remote hook up, no, if the 2.5 MM is for audio that should tell you same thing. My Fujifilm XF-100F uses 2.5 MM port for both MIC/REMOTE and is clearly labeled as such. This being my first Fuji camera can't really speak to the XT-2 but......if you are not using PS (non web based) to process you Fuji Raw files may I ask what program you are using. CS5, ON1 and DxO do not support Fuji RAW, ON1 will process it but converts to Adobe RGB thus negating the menu driving film styles in the camera.