The rock gray Camera Shoulder Strap from PGYTECH can be worn over your shoulder, around your neck, or across your body. This strap has original quick bead connectors which utilize a dead center locking mechanism. This mechanism will stay locked as long as the bead stays in place. To unlock the bead simply press the upper part of the quick connector. The loop on the quick connectors is made from three layers of woven fabric; an outer wear-resistant layer, an inner replace-warning layer, and the load bearing core. The replace-warning layer shows when it's time to replace your loop. The loops are abrasion-resistant and made from UHMWPE, a thermoplastic polyethylene that is ten times stronger than steel wire and able to support 198 lb. Quickly adjust this strap to your ideal length with the quick adjusters on both sides of the strap. This strap is made with resilient EPDM padding and has a streamlined shape for comfort and style.

Quick Release Bead Connectors    Adjustable Length    Supports up to 198 lb    Configured with Arca-Type QR Plate    Sturdy 3-Layer Loops

Related Questions and Answers

Q: 1. How wide is the strap in the widest part?

A: The Evoc Camera Shoulder Strap Lite is 1.5 inches wide.

Q: 2. Is the Pelican case still waterproof after the strap mounts are screwed into it?

A: Yes, the screws on the Pelican 1472 Shoulder Strap - for Pelican 1470 or 1490 Series Cases have seals so the Pelican case will still be waterproof after the strap mounts are screwed into it.

Q: 3. Will this fit EOS r6 II with RF 24-70 2.8L and an RF 70-200 2.8L or RF 100-500 L?

A: The PGYTECH OneGo Shoulder Bag (10L, Shell Gray) should comfortably support a camera and two lenses like the Canon EOS R6 Mark II Mirrorless Camera (B&H # CAER62) with the Canon RF 24-70mm f/2.8 L IS USM Lens (B&H # CA2470RF) and the Canon RF 70-200mm f/2.8 L IS USM Lens (B&H # CA70200RF). A third lens like the Canon RF 100-500mm f/4.5-7.1 L IS USM Lens (B&H # CA100500LRF) may make it a snug fit.

Q: 4. Would this work with the 1485 air?

A: No, Pelican 1472 Shoulder Strap is only compatible with the Pelican 1470 or 1490 Series Cases. The 2 x Circular Attachment Rings included with the strap are connected into the compatible cases which allow the strap to be connected.

Q: 5. Can I use with x-t5?

A: Yes, the FUJIFILM Shoulder Strap for X-S10 (Black) can be used with the Fujifilm XT-5 camera. You will need the Ruggard Split D-Ring (Pair) BH #RUTSR2PK.

Q: 6. Is this strap good enough to hold canon 5d3 with canon 70-200 f/2.8 IS II attached ?

A: Yes, this strap can hold that camera/lens combination.

Q: 7. Does fit regular size flash light + Fuji xh2 + 10-24 mm lens ?

A: Yes, the PGYTECH OneGo Shoulder Bag (6L, Obsidian Black) can hold the Fujifilm X-H2 camera, the Fuji 10-24mm lens, and an average sized shoe-mount flash.

Q: 8. Does it fit EOS R6 II with two lenses? RF24-70 L and 15-25mm L

A: Yes, you will be able to fit an R6II, with a 24-70mm 2.8L and a 15-35mm 2.8L .

Q: 9. What is the heaviest camera weight (load capacity) of this strap?

A: EVOC Sports states that each buckle of the Camera Strap Lite has a tension strength of around 20kg (44 lbs), meaning overall 40 kg (88 lbs). So the strap may support larger DSLR cameras with attached telephoto lenses.

Q: 10. Where on the case am I supposed to attach the hooks on the strap?

A: When using this Pelican 1472 Shoulder Strap with the Pelican 1490 Attache Case, there will be mounting holes on the side of the case to accept the included hooks.