Best Budget Av Receiver With Hdmi

Aja Dante Av 12g-sdi/hdmi 4k Transmitter And Receiver Kit

Product Code: ga133405
Availability: In Stock

$10,493.85 $13,327.19

Qty

0 reviews Write a review

Description
Reviews (0)

Use the AJA Dante AV 12G-SDI/HDMI 4K Receiver to decode Dante AV Ultra signals up to UHD 4K into 12G-SDI and HDMI video via your Ethernet network. In combination with the separately available transmitter, the receiver can operate in your conference room, lecture hall, or event space thanks to its modular system design. Connect the unit to your Dante AV network using the primary Ethernet port. The receiver features one 12G-SDI and one HDMI 2.0 output capable of supporting signals up to 4Kp60. 8-channel, 48 kHz embedded PCM audio from those sources can be distributed across the network via TCP/IP protocols.

The receiver is compatible with Dante Controller software which allows you to route the video, audio, KVM, VISCA, and IR connections via your network to the destination of your choice. Two USB-A ports connect peripheral devices while a mini-USB port inputs your Windows or macOS computer. IR communication is facilitated using the 3.5mm input and output ports and included emitter and receiver units. The receiver supports HDCP 2.2 and has a DB-9 port for RS-422 serial control. Five LED indicators on the front panel of the unit display power, codec, system, sync, and HDCP status.

1 x Dante AV 12G-SDI/HDMI 4K Transmitter 1 x Dante AV 12G-SDI/HDMI 4K Receiver Dante AV Ultra Signals up to UHD 4K 12G-SDI and HDMI 2.0 Interfaces Gigabit Ethernet Ports, PoE+ HDCP 2.2 Support, RS-422 Serial Control

Inputs / Outputs
Audio Inputs	No
Video Outputs	1x HDMI (2.0) Female 1x BNC (12G-SDI) Female
Audio Outputs	1x 2RCA Analog Female
Other I/O	1x BNC Reference Input 1x RJ45 LAN, PoE 1x RJ45 LAN 1x DE-9/DB-9 RS-422 Input 2x USB-A 1x Mini-USB Input 1x 1/8" / 3.5 mm IR Input 1x 1/8" / 3.5 mm IR Output
Expansion Slots	No
Latency	0.5 Frame
Format Support
Output Video Format	SDI (10-Bit 4:2:2 YCC) DCI 4K 23.98/24/25/29.97/30/50/59.94/60 fps UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps DCI 2K 23.98/24/25/29.97/30/50/59.94/60 fps 1080p 23.98/24/25/29.97/30/50/59.94/60 fps 1080PsF 23.98/24/25/29.97/30 fps 720p 50/59.94/60 fps HDMI (8/10/12-Bit 4:4:4/4:2:2 RGB, YCC) DCI 4K 23.98/24/25/29.97/30/50/59.94/60 fps UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps DCI 2K 23.98/24/25/29.97/30/50/59.94/60 fps 1080p 23.98/24/25/29.97/30/50/59.94/60 fps 720p 50/59.94/60 fps HDMI / SDI (8-Bit 4:4:4) WUXGA (1920 x 1200) 60 fps UXGA (1600 x 1200) 60 fps SXGA (1280 x 1024) 60 fps XGA (1024 x 768) 60 fps SVGA (800 x 600) 60 fps VGA (640 x 480) 60 fps
Output Audio Format	LPCM (Linear Pulse-Code Modulation): 48 kHz / 24-Bit
Embedded Audio	SDI Input: 8-Channel HDMI Input: 8-Channel
Standards
Video Standard Compliance	SMPTE 292M/424M/425M-A/ST-2081/ST-2082
HDCP Support	Yes, Version 2.2
EDID Support	No
HDR Support	No
Hardware
Tally Light	Yes
OS Compatibility	Windows macOS
Power
Power I/O	1x XLR 4-Pin (12 VDC ) Input
PoE Support	PoE+ 802.3at
Power Consumption	Power Supply: 100 to 240 VAC at 1.5 A
Environmental
Operating Temperature	32 to 104°F / 0 to 40°C
Storage Temperature	-40 to 140°F / -40 to 60°C
Operating Humidity	10 to 90% ()
General
Certifications	CE, EN 62868-1, FCC, ICES, IEC 62368-1, EN 55032: 2015 + A11: 2020, EN 55035: 2017 + A11: 2020, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 61000-4-2: 2009, EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-4: 2012, EN 61000-4-5: 2014/A1:2017, EN 61000-4-6: 2014, EN 61000-4-8: 2010, EN 61000-4-11: 2020, Kcc, BSMI, VCCI
Dimensions	8.74 x 7.09 x 1.65" / 22.2 x 18.01 x 4.19 cm
Weight	3.1 lb / 1.4 kg
Packaging Info
Package Weight	3.61 lb
Box Dimensions (LxWxH)	10.7 x 10.1 x 4"

Dante AV is a 1 GigE networking solution that delivers up to UHD 4Kp60 video at a 0.5 frame latency over IP connection. It features a JPEG 2000 codec for high quality visuals with network efficiency. The codec supports lossy and lossless coding and has up to 16384 components. Easily integrate Dante-enabled audio products into your setup for a complete AV-over-IP ecosystem.

Use the Dante Controller software with your macOS or Windows computer to set up your video and audio signal routing between Dante devices. Control the video and audio connections and move them over in real time to an Ethernet network. Take the receiver's embedded audio and configure it as a separate audio source channel on the network using the Dante Via. The separately available Dante Virtual Soundcard can emulate a physical PC or Mac soundcard via the Dante network.

The primary Ethernet port supports PoE+ for reduced cable runs. Included with the receiver unit is a power adapter capable of converting 100-240 VAC at 50/60 Hz to 12 VDC. A DIN 4-pin power input accepts the power adapter cable.

The Dante AV receiver supports various VESA formats from WUXGA to VGA to allow efficient monitoring of your networked connections. An RCA analog audio port outputs audio signals to your monitor.

Related Questions and Answers

Q: 1. Can this T-Tap cross convert so the different outputs are send out different formats?

A: no it can not.

Q: 2. Can I feed audio from the headphone jack to my receiver for my monitor speakers?

A: Yes, it is possible to take the 3.5mm TRS stereo output from the AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output and plug it into speaker monitors using appropriate adaption.

Q: 3. Does this receive and sends 59.94i

A: Yes. In the following formats SDI/BNC: 1080p at 25, 29.97, 30, 50, 59.94, 60 fps 1080i at 50, 59.94 fps 720p at 60 fps HDMI: 1080p at 24, 25, 30, 50, 60 fps 1080i at 50, 60 fps 720p at 60 fps

Q: 4. does this work with fcpx?

A: AJA does show FCP X on their website for compatibility.

Q: 5. Can there be multiple transmitters to one receiver?

A: Unfortunately no that is not possible.

Q: 6. How many frames of latency does this converter introduce?

A: About 1 to 2 lines of scanning. Visit the document below: https://www.aja.com/assets/support/files/2374/en/AJA_Path_Delays_v02.2.pdf

Q: 7. Does this device support 23.98psf?

A: This supports outputs up to UHD 4K60. It should work well for 24fps.

Q: 8. Can it output from Macs that don't have support for external HDR displays?

A: The AJA T-TAP Pro Thunderbolt 3-Powered Converter with 12G-SDI and HDMI 2.0 Output would support the following applications and allow you to output to HDR displays. See software compatibility. https://bit.ly/3GFz7dP

Q: 9. Does this transmit timecode?

A: Yes, this will support timecode.

Q: 10. I shoot in 4K and edit in HD. Can T-Tap Pro take a 4K signal and downconvert to HD for playback?

A: The AJA T-TAP Pro does not have built in downconverters. However, depending on the editing software, like Premiere Pro. You can have UHD/4K sequence and have the playback setting “match control panel” in Premiere Pro preferences with the T-tap Pro format set to HD/2K to playout.

There are no reviews for this product.