You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Pelican Carry-on Case With Trekpak Divider System (black, Special 50th Anniversary Edition)

Pelican Carry-on Case With Trekpak Divider System (black, Special 50th Anniversary Edition)
  • Product Code: ga133419
  • Availability: In Stock

$959.85 $1,190.21

The  Pelican Carry-On Case with Trekpak Divider System is an unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof hard case used to carry any kind of equipment that needs to be protected from the elements. It is made of an ultra-high-impact structural copolymer that makes it extremely strong and durable. It has a 0.25" neoprene O-ring and includes an automatic purge valve for quick equalization after changes in atmospheric pressure. It has a hinged case with double ABS latches that seal perfectly, and padlock protectors that provide added strength and extra security against cutting and theft.

The comes with long side handles, a long front handle, a retractable extension handle, and strong polyurethane wheels with stainless steel bearings. It has an effortless release latch for the extension handle. The case meets current FAA requirements for carry-on luggage.

Besides being lighter than traditional padded dividers, the TrekPak Divider System uses pre-installed wall sections, divider panels, locking pins, and an easy-to-use cutting tool. Simply lay your gear in the case, measure and cut the divider sections, and lock them in place with the steel U-pins. Extra divider material is included for occasions where your equipment requirements vary. The 7/16" thick divider sections are made of waterproof, closed-cell foam that is laminated to a rigid, corrugated plastic panel that resists tearing and shredding. The TrekPak is combined with a 1" bottom foam and lid foam to give your gear 360-degree protection.

In honor of B&H's 50th anniversary, Pelican presents this limited edition run, specially designed to celebrate five decades of creative partnership. This exclusive Special 50th Anniversary Edition embodies the commitment to excellence that B&H stands for. Get your hands on a piece of history with this distinctive edition.

Official B&H 50th Anniversary Edition    Watertight, Dustproof Case    Made of Ultra-High Impact Copolymer    ABS Double Throw Latches    Built-In Purge Valve    Front Large Folding Haul Handle    Large Side Folding Haul Handles    Retractable Extension Handle    Polyurethane Wheels with SS Bearings

Key Specs
ColorBlack
Carry/Transport OptionsRetractable Handle, Handle, Wheels (Built-In)
Type of ClosureLatch
Interior TypeAdjustable Dividers (Non-Hook & Loop)
Water ResistanceWaterproof
DimensionsExterior
22 x 13.8 x 9" / 55.9 x 35.1 x 22.9 cm
Interior
19.75 x 11 x 7.6" / 50.16 x 27.9 x 19.3 cm
Weight13.6 lb / 6.2 kg
Parameters
Camera CompatibilityUniversal
Carry/Transport OptionsRetractable Handle, Handle, Wheels (Built-In)
Type of ClosureLatch
Interior TypeAdjustable Dividers (Non-Hook & Loop)
Features
ATA CompliantYes
Pressure/Purge ValveYes
Security LockAccepts Padlock (Not Included)
General
Water ResistanceWaterproof
Maximum Buoyancy64.15 lb / 29.1 kg
Maximum Volume0.96 ft³ / 27184.2 cm³
Padded InteriorYes
MaterialsExterior: Polypropylene
DimensionsExterior
22 x 13.8 x 9" / 55.9 x 35.1 x 22.9 cm
Interior
19.75 x 11 x 7.6" / 50.16 x 27.9 x 19.3 cm
Weight13.6 lb / 6.2 kg
Packaging Info
Package Weight15.05 lb
Box Dimensions (LxWxH)22.4 x 14.1 x 9.3"

Unbreakable, watertight, airtight, dustproof, chemical-resistant, and corrosion-proof case

TrekPak insert with two perimeter pieces, two 15" dividers, one 23" divider, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.

Made of ultra-high impact structural copolymer that makes it extremely strong and durable

Built-in purge valve for changes in altitude or temperature

Temperature rating of 10° to 210°F

  • Front large folding haul handle
  • Large side folding haul handles
  • Retractable extension handle
  • Strong built-in polyurethane wheels with stainless steel bearings

Padlock protectors provide added strength and extra security against cutting and theft

Related Questions and Answers

Q: 1. Does this come with the TrekPack?

A: Yes, the TrekPak Divider Kit for Pelican 1510 Carry-On Protector Case, BH # TRP1510CI would be a suitable option. https://bhpho.to/3c95CHc

Q: 2. Will this case fit a Canon 500mm f/4 IS II lens? (I am worried about the diameter of the lens hood, which is 7 .)

A: Perhaps w/o the hood ...

Q: 3. Will it hold a 600mm?

A: Yes, this would hold a 600mm lens.

Q: 4. Will this case fit a DJI Phantom 2?

A: It may fit the DJI Phantom 2. What you should know and I sent a letter to Pelican about the case, is in some of the smaller planes, the case will not fit in the over head on board luggage rack. You'll have to use VIP express check it at the gate.

Q: 5. Will this case fit a DJI Phantom 3 Professional?

A: Not sure about the height. If the two legs could be removed it would fit it perfectly. I believe the width should be fine.

Q: 6. Will this case fit a Sony Alpha A7s III?

A: This case has more than enough space to fit an A7SIII with several lenses and accessories.

Q: 7. What's the difference between 1510TP vs 1510TPF?

A: The TPF is a hybrid case, it utilizes a combo of foam and the trek pak dividers.

Q: 8. Photos show all the options. Just what is it that this case comes with? I see the TrekPak with mesh pockets in the top and TrekPak with egg carton foam in the top. Which is it for the 1510TP with Trekak Divider System?

A: The foam under the top lid of the 1510TP is the standard foam included with Pelican cases along with the included TrekPak inserts.

Q: 9. For anyone with experience using this case as a carry-on for a flight, do you need to take everything out of the case to send through security? Or will they allow everything to remain contained?

A: No when you go through security, I have never had to take everything out of the case and send them through individually. They may ask to open it up after scan to look inside, but I have never had them ask to take everything out individually for the scan.

Q: 10. Is the slide out handle long enough for a tall person? It's a pain hunching over while bulling a carry-on case. About the same as your run-of-the-mill roller bag? thx

A: Yes

16/08/2024

Great case for transporting camera equipment, sturdy, easy to get around with, LOTS of room, and most important, keeps all your equipment safe. Use it here for all weddings and events we shoot as well as when we travel abroad for destination weddings. As someone mentioned before, spending $ to keep $10k safe, well worth it.

5
07/08/2024

We're wedding videographers and this fit pretty much all of our video gear (11 lenses, 3 DSLR bodies, batteries, chargers, 2 LCDVF's, filters, Rocket Air), some of our audio equipment (2 Rode video mics, 1 Sony handheld Mic (UWP-V2), and even our two Midland walkies + security headsets. The case is sturdy, looks good, rolls great, and is just simply put: exactly what we needed! I think this would almost certainly fit in the overhead compartment of larger 737+ aircraft too...

5
03/08/2024

Great product.... definitely i will buy another in the future...

5
11/07/2024

Legendary build and made right here in the U.S.A. The case has a lot of space and the padded dividers allow you change your layout on a whim if needed. I use mine top carry a Bronica ETRSI, a Polaroid back and spacer, film, 3 prisms, 5 Film backs, 5 lenses with shades and still have room left for smaller items and at least two more lenses if needed.

5
15/06/2024

Store almost all my Camera equipment/laptop in it.

5
28/05/2024

Pelican is an industry standard, and the 1560 Roller with Dividers is an essential in my everyday life! It houses perfectly a full 35mm support rig including mattebox, x2monitors, Anton Bauers, followfocus, shoulder support, and endless accessories. The paddeded removable dividers allow endless configurations, from lenses and bodys, to director monitors. B+H has by far the BEST price on this case, I would have paid twice at my local camera shop. Highly recommended.

5
07/04/2024

I've had the normal soft cases for a few years, but as the dollar ammount I've invested in my equipment has grown, I've noticed my protection and storage of that equipment has lagged behind. Not anymore with the Pelican 1564!! This thing is a tank! We use them at my fire station to protect our technical dive equipment and i've seen the cases take a beating, yet our gear inside remains perfectly safe. So the Pelican box was a no brainer for my photography gear. Plenty of room for 3 bodies, zooms, primes, flashes, and all the accessories. I've still got room to spare. The organizer works great and can be arraigned in any way you can imagine. The pull out handle is great for moving it around like a suitcase. It has been everything I thought it would be and more as far as protecting my gear, and if you are on the fence about this case or any other sized Pelican box, I assure you, buy it, try it, and you'll love it!! I sleep soundly knowing my gear is safe in a Pelican case!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Atomos Carry Case For Neon 17 Monitor

$507.00 $725.01

Atomos Carry Case For Neon 24 Monitor

$750.00 $1,012.50

Nomatic Method Luggage Carry-on Case (gray, 39l)

$1,049.97 $1,259.96

Odyssey Wheeled Utility Case

$647.85 $829.25

Beta Shell 5.260 Lens Case

$234.00 $351.00

Nanuk 905 Hard Case (olive, 6.3l)

$194.85 $280.58

Antec Dp505 Mid-tower Gaming Case (white)

$539.97 $723.56

Products You May Like

Portabrace Cba-hm700 Camera Body Armor

$882.96 $1,377.42