Made for rifles, carbines, and other long-gun applications, this HS530C Titanium Solar Micro Sight from Holosun features a green, circle-dot reticle, a 30mm diameter sight window, and a multicoated lens for clear and unobstructed targeting at close and long ranges. Built with a grade 5 titanium housing, the sight comes with two mounts, including a QD, 1.41" absolute co-witness mount for added compatibility. The multiple reticle system has three options: a 2 MOA dot, a 65 MOA circle, and a combined reticle. The sight's circle-dot Super LED has ten daylight brightness levels and two night-vision settings. It is powered by a CR2032 battery for 50,000 hours of battery life. The battery is backed up by Holosun's Solar Failsafe technology, which uses solar power to keep the sight working after the battery fails.

For Rifles, Carbines & Other Long Guns    30mm Diameter Sight Window    Green Super-LED Circle-Dot Reticle    2 MOA Dot, 65 MOA Circle    1x Magnification, Parallax-Free    Self-Adjusting Brightness with Override    50K Hours of Battery with Solar Failsafe    Grade 5 Titanium Housing

• 1x magnification is ideal for close-quarters engagement
• Unlimited eye relief when using both-eyes-open shooting techniques allows for complete situational awareness
• 30mm diameter sight window with multiple layers of antireflective coating on all optics to ensure bright and clear views

• Multi-Reticle System features three reticle options in circle/dot configuration
• 65 MOA ring for longer distance targets
• 2 MOA aiming dot for close-range shooting
• 12 brightness settings, including two suitable for night vision gear
• Shake Awake technology with last setting recall
• Solar Failsafe technology powers reticle after battery failure

• .5 MOA adjustment per click impact point correction
• +/- 50 MOA windage and elevation adjustments

• Complete grade 5 titanium housing
• IP68-rated shock, fog, and water resistant
• Included 1.41" QD absolute co-witness mount
• Runs on one included CR2032 battery

Related Questions and Answers

Q: 1. Will all the features work on a Fuji X Pro 1?

A: limited features are applicable on FUJIFILM X-Pro1. Full features on the following pro bodies. FUJIFILM X-Pro2 FUJIFILM X-Pro3

Q: 2. Does this include a tray to actually place a filter inside it? Or do I have to purchase the dual filter slot with it?

A: The filter tray is sold separately. The link below is the tray you will need: https://www.bhphotovideo.com/c/product/1672670-REG/tilta_mb_t16_dcf_dual_circular_filter_tray.html?sts=pi&pim=Y

Q: 3. Does it show the aperture onscreen when mounted in a Sony A6000?

A: Yes, the TTArtisan 27mm f/2.8 Lens (Sony E, Black) will display the aperture (F-number) on the screen of the Sony A6000 camera.

Q: 4. Is there a lens setting which will automatically set the aperture when used with an X-E1?

A: TTArtisan 27mm f/2.8 Lens (FUJIFILM X, Black) has an A for auto mode next to f/16. When the aperture is set to A, you can control the lens aperture on the camera or set up semi manual or auto modes on your fujifilm X-mount cameras.

Q: 5. Is this compatible with Fujifilm X-S20 Camera ?

A: This Leofoto Universal Titanium L plate is too big for Fujifilm X-S20 Camera. Leofoto's other L plates are also too big for this camera.

Q: 6. Will this adapter allow a Krasnogorsk screw mount lens to be affixed to a Blackmagic pocket cinema camera?

A: As long as the Krasnogorsk lens you have has the M42 screw mount, and not the Russian Bayonet mount, you could use the Dot Line Micro Four Thirds Adapter for Pentax M42 Lenses to attach your lens to the Blackmagic Pocket Cinema Camera

Q: 7. Is this lens "focus by wire" when using manual focus?

A: Yes, the TTArtisan 27mm f/2.8 Lens for FUJIFILM X (Black) in manual and autofocus is focus by wire.

Q: 8. will this work to connect a Mamiya 55mm 1.8 lens M42 to an Olympus OMD EM1?

A: If you are referring to the Mamiya Auto Mamiya/Sekor 55mm f/1.8 (M42) lens, yes, the Dot Line Micro Four Thirds Adapter for Pentax M42 Lenses would allow you to connect the lens to the Olympus OM-D Mirrorless Digital Camera.

Q: 9. will a canon 50mm f/1.4 fit this adapter?

A: Yes, all Canon EF mount lenses are compatible with the Dot Line Tilting Lens Mount Adapter for Canon EF Mount Lens to Micro Four Thirds Camera.

Q: 10. will it improve crop factor?

A: The Tilting Lens Mount Adapter for Canon EF Mount Lens to Micro Four Thirds Camera will have no effect on crop factor.