The Magewell Pro Convert Audio DX offers extensive flexibility as an IP audio conversion and capture tool, enabling seamless audio conversion between Dante, NDI, and SRT in multiple directions. It serves as the perfect solution for bridging software, audio, and IP networks.

IP Audio Conversion and Capture    Encode Analog Audio into Dante, NDI, SRT    Decode IP Audio into Dante, NDI, SRT    Capture Audio on Computer via USB    Up to 24-Bit / 96 kHz Audio

• Encode analog audio into Dante, NDI, and SRT
• Decode IP audio streams into Dante, NDI, and SRT (analog output)
• Capture audio on your desktop or Laptop via USB
• Support for sample rates of 44.1, 48, 96 kHz, and 16-/24-bit sample depth
• 1/4"–20 screw-mounting hole

• 1 x 2-channel 3.5mm TRS unbalanced in
• 1 x 2-channel 4.4mm TRRRS balanced in
• 1 x 4-channel 24-bit/48 kHz USB Audio Class in
• Receiving 1 x 8-channel 24-bit Dante streams
• Receiving 1 x 4-channel 16-bit SRT network audio stream
• Receiving 1 x 4-channel 16-bit NDI network audio stream
• Support for PTP master/slave

• 1 x 2-channel 3.5mm TRS unbalanced out
• 1 x 2-channel 4.4mm TRRRS balanced out
• 1 x 4-channel 24-bit/48 kHz UAC out
• Encoding 1 x 8-channel 24-bit Dante streams
• Encoding 1 x 4-channel 16-bit SRT network audio stream
• Encoding 1 x 4-channel 16-bit NDI network audio stream
• Encoding 1 x 4-channel 16-bit RTSP network audio stream
• Support for PTP master/slave

Related Questions and Answers

Q: 1. Would I need to do anything special for this to support a shielded category cable?

A: Shielded and unshielded cables can plug directly into the BNC ports on the Magewell Pro Convert SDI Plus.

Q: 2. Do we still need to configure this? Or just plug and play?

A: This product is going to require some level of configuration with one of the compatible software programs that you use it with. While it should be easy to use, it will not be plug-and-play.

Q: 3. Is this product compatible with the NDI-HX protocol?

A: No this device only supports NDI. it does not support the HX version of NDI

Q: 4. Can I use an NDI app on my phone to send video to this device?

A: no this is NOT a wireless NDi device and you can not use an NDI app to send video to this device but if you have an HDMI video out from your mobile device you can connect the HDMI signal to this and it will convert the HDMI signal to NDI

Q: 5. Does this device output over hdmi 3840x2160 30 fps?

A: Yes, the Magewell Pro Convert NDI to HDMI Decoder does output 3840 x 2160 30 fps over HDMI.

Q: 6. Will the Tricaster TC1 automatically pickup the audio without routing through Dante?

A: The Vizrt TriCaster TC1 would require a Dante License in order to recognize Dante audio streams created by the Magewell Pro Convert Audio DX. The The Vizrt TriCaster TC1 would be able to natively receive an NDI audio stream created by the Magewell Pro Convert Audio DX.

Q: 7. Can someone tell me what the Network connection is at? 1gb or can it be 10g? I know on the NDI HDMI (or SDI) Magewell converters its a 1gb network connection.

A: The connector is a gigabit connector on the Magewell Pro Convert HDMI 4K Plus. Network Interfaces 10/100/1000Mbps Ethernet IEEE 802.3af PoE

Q: 8. Will it cross convert for example, NDI 1080i@59.95 to SDI 1080p@29.97?

A: Yes, the Magewell Pro Convert for NDI to SDI Decoder supports manually setting output resolution and frame rate. You will be able to select 1080p 29.97 as the output resolution.

Q: 9. Can I attach three of these to 5 port switch and still get a good quality feed? They would each be bringing a different NDI signal.

A: That will depend on the speed of the Network Switch. We recommend Gigabit network switches and higher for NDI set ups.

Q: 10. Will this pass 608/708 captions? Any way to gen lock it?

A: The manufacturer does not have any published specs defining support for caption pass through and there is no option for genlock on this device.