The Eartec EVADE EVX11D-CM is a dual-channel, full-duplex wireless intercom system suitable for facilitating communication among 11 people for light industrial applications. This version of the system includes the Conference Module, a dual-channel wireless repeater, which allows for 2 completely independent crews to talk privately. In addition, the Conference Module expands the EVADE system to accommodate up to 16 users; a second Conference Module (available separately) can be added to accommodate a maximum of 32 users.

This configuration includes one dual-ear master headset for the team leader and 10 dual-ear remote headsets. The core technology necessary for operating the intercom system, including the battery, has been built into one of the headset's earcups—eliminating the need for wires or a bodypack. The headsets link automatically for transmission in the 2.4 GHz spectrum at a maximum range up to 2640', while the system's frequency-hopping technology automatically switches to a clear frequency if interference is detected on any of the channels, helping to ensure clear, reliable communication.

The microphone boom on each headset swivels up to 270°, allowing the user to wear it on the left or right side. Rotating the boom into the up position automatically mutes the microphone, and a simple five-level volume control is easily accessed on the earcup. Each headset features a rechargeable LiPo battery, which will power it for up to 8 hours. 11 rechargeable batteries, a nine-bay multi-port charger, and a large soft-side case are provided.

The lightweight Conference Module digital transceiver can be worn on a belt or placed centrally on location and is super-easy to use. Pressing the conference button on the module's face connects the entire team and tapping the button again re-separates the groups.

Intercom System for 11 People    Includes Dual-Channel Conference Module    Lets 2 Separate Crews Communicate    1 Dual-Ear Master Headset    10 Dual-Ear Remote Headsets    270º Adjustable Boom, Auto-Mutes when Up    Reliable Frequency-Hopping Technology    Up to 2640' Range, 8 Hours per Charge    11 Rechargeable Batteries    Includes 9-Bay Charger & Case

• Included dual-channel Conference Module allows 2 independent teams to communicate privately
• Conference Module supports up to 16 users at the same time
• Add a second Conference Module (available separately) to accommodate up to 32 users maximum
• Light, industrial dual-ear headsets with extra-wide padding for all day comfort
• Excellent performance at a range up to 1/2 mile
• Frequency-hopping technology automatically switches to clear channel to eliminate interference
• Radio installed inside earcup, no wires or bodypacks needed
• LiPo batteries provide continuous 8-hour operation and are field replaceable
• 270° swivel boom allows user to wear mic on left or right side
• Auto-mute boom automatically mutes mic when in UP position
• Volume control with simple up/down push-button adjustment
• Sealed for use outdoors in inclement conditions
• Use up to 9 headsets at once in single-channel mode without a base station or hub 

Related Questions and Answers

Q: 1. Can two of the headsets be used on their own without the hub? How do I make one a master and the other link to it without the hub? Instructions online show how to do this on a different model.

A: In his set up, the headset that connects to the hub with a cable is always the master headset. You would have to get a separate wireless master headset to use for a two-person set up, without a hub.

Q: 2. If both transmitters are in use, are their signals separate in the receiver?

A: The Godox MoveLink II M2 Compact 2-Person Wireless Microphone System has a two-channel receiver that can be set for mono or stereo output when using both transmitters. In mono mode, the audio from both transmitters is combined so you hear them both mixed together on the left and right channels (same audio on both sides). In stereo mode, the audio from the transmitters will be separated, so you will hear the audio from one transmitter on the left channel and the audio from the other transmitter on the right channel.

Q: 3. How does IFB work with this system?

A: To implement IFB with the Hollyland Syscom 1000T-4B Full-Duplex Intercom System with Four Beltpacks and Headsets, use the Hollyland 2/4 Wire Converter for Intercom Systems (BH #HO24WCONVERT).

Q: 4. How can I extend the 8-pin LEMO headset connection? I need a bit more reach to the base station from our switcher position.

A: Right now there is no easy way to extend the 8-Pin lemo connection for the Hollyland Syscom 1000T-4B Full-Duplex Intercom System with Four Beltpacks and Headsets.

Q: 5. I would like to use the AC / Adapter for the hub. What kind of the Volt output? 5V or 12V?

A: The voltage output of the ac adapter to the Hub mini is 5v, 1 amp.

Q: 6. Does this system have the capability to have multiple channels for communication between multiple teams?

A: No, the Hollyland Syscom 1000T-8B Full-Duplex Intercom System with Eight Beltpacks and Headsets does not have multiple channels or grouping capabilities.

Q: 7. can the auto mute be disabled and work as push to talk?

A: The "Automute" functionality of the headsets in the Eartec TCS-4000PL Wired Intercom with 4 Headsets is implemented when the microphone boom arm is oriented upwards and is not able to be disabled.

Q: 8. Does this have sidetone?

A: Yes, the Hollyland Syscom 1000T-8B Full-Duplex Intercom System with Eight Beltpacks and Headsets does provide a sidetone feature.

Q: 9. Will the TX work with a shure SM63 hand held mic or do I need phantom power? Connecting RX to Sony a7c.

A: The Shure SM63 Dynamic Microphone can be connected to the input on the wireless transmitter for the Godox MoveLink II M2 Compact 2-Person Wireless Microphone System. You can use the Kopul LMT100 Low to High Impedance Matching Transformer (B&H # KOLMT100) as an adapter to enable the connection.

Q: 10. How does this integrate with a ClearCom wired system?

A: You will need the Hollyland 2/4 Wire Converter for Intercom Systems (B&H # HO24WCONVERT) and standard XLR cables to connect the wired Clear-Com intercom system with the SYSCOM 1000T base station. The wired Clear-Com system's output will connect to the 2-wire input on the 2/4 Wire Converter and the SYSCOM 1000T connects to the 4-wire in/out.