Enjoy dynamic sound from your amplifier with the Debut Reference Three-Way Floorstanding Speaker with black baffle & walnut cabinet from ELAC. The speaker features a three-way design with a 1" cloth dome tweeter, a 5.25" woven aramid-fiber cone mid-woofer, and two 5.25" woven aramid-fiber cone woofers. It produces a 42 Hz to 35 kHz frequency response and accepts up to 140W of power from your amplifier. One front- and two rear-firing dual-flared ports enhance the speaker's bass performance.

2 x 5.25" Woven Aramid-Fiber Woofers    5.25" Woven Aramid-Fiber Cone Midrange    1" Cloth Dome Tweeter    Up to 140W Power Handling    3 x Dual-Flared Ports    5-Way Binding Posts    Magnetic Fabric Grille Included

The Reference Series' waveguide and grille design enhance upper high-frequency response.

Three dual-flared ports allow for lower noise and higher bass output for improved bass dynamics.

A full-perimeter brace that joins the top and side panels significantly lessens cabinet vibrations, minimizing cabinet coloration.

Dual cast chassis woofers provide improved stiffness for both strengthening the front baffle and minimizing chassis resonances.

Oversized ceramic magnets produce high motor strength for powerful bass reproduction.

The top and bottom plates are constructed from low carbon steel for high magnetic conductivity to maximize flux density.

Related Questions and Answers

Q: 1. do you need to have a fcc?

A: Negative, these radios do not transmit over 2W so they are FRS radios that do not require an FCC license.

Q: 2. What cable(s) can I use to connect my Nord C2D to this speaker? Besides the expensive 11-pin cable...

A: The 11-pin cable seems ideal for connecting your Nord C2D to the Hammond 3300 Leslie Rotary Portable Speaker (Red Walnut), however as an alternative you could connect the L/R 1/4" outputs of your Nord to the 1/4" line input of the Hammond. A cable such as BH #MOSRC1421412 Mogami 1/4" TRS to Dual 1/4" TS Gold Send/Return Cable (12') would be appropriate.

Q: 3. does it have a headphone plug ?

A: there is a headset connection on the LXT500VP3 and is compatible with 2 prong Midland headsets. a href= http://bhpho.to/1uo7Qk2 target= _blank http://bhpho.to/1uo7Qk2/a

Q: 4. How do the headsets work? I will be using this in a retail setting.

A: They work great

Q: 5. Does this come with the Sumiko Ranier cartridge?

A: According to the Pro-Ject site, the Debut Carbon Evo model comes with a MM-Cartridge Ortofon 2M Red. https://www.project-audio.com/en/product/debut-carbon-evo/#specs

Q: 6. what are the exterior dimensions?

A: The exterior dimensions of each speaker are: 6.9 x 10.2 x 9.3 inches, or 17.5 x 25.9 x 23.6 cm .

Q: 7. What is the load capacity?

A: I purchased a pair of these from B&H. They arrived damaged. They are absolute junk. i returned them immediately. I would not recommend them to anyone.

Q: 8. CAN I USE ELAC 2.0 A4.2 HAS REAR ATMOS SPEAKERS FOR dobby speaakers?

A: The ELAC Debut 2.0 A4.2 Atmos Add-On Speakers (Pair), BH # ELDA42BK, may be used for the Dolby Atmos channels.

Q: 9. Exactly what are the frequencies of these 50 channels, and what is the FCC license needed to legally operate this radio?

A: Frequency Band 462.550 - 467.7125 MHz Weather Alert 162.400 - 163.275MHz Channel Frequency (MHz) Notes1 462.5625 Shared with GMRS2 462.5875 Shared with GMRS3 462.6125 Shared with GMRS4 462.6375 Shared with GMRS5 462.6625 Shared with GMRS6 462.6875 Shared with GMRS7 462.7125 Shared with GMRS8 467.5625 FRS use only9 467.5875 FRS use only10 467.6125 FRS use only11 467.6375 FRS use only12 467.6625 FRS use only13 467.6875 FRS use only14 467.7125 FRS use only

Q: 10. where is the power switch for the leslie?

A: In back on the bottom where the speed control and everything else is.