Designed to be versatile, the Focal Sub 600P 12" 600W Subwoofer is right at home in most surround sound or hi-fi stereo setups. A 600W Class-D amplifier drives Focal's high-power-handling Polyflex woofer to provide deep, impactful, and controlled bass. Its closed-cabinet design helps to eliminate interference and reproduce the original sound signal as faithfully as possible. With its high-gloss black front panel, brushed MDF body, and magnetic grille, the Sub 600P is a modern and discrete addition to any listening room. All Focal speaker drivers are developed and manufactured in France by Focal.

12" Polyflex Cone Woofer    600-Watt Class-D Amplifier    Closed Cabinet Design    28 to 270 Hz Frequency Response    Stereo RCA & RCA LFE Inputs    Auto Standby Mode

• 300W RMS power
• 600W dynamic power
• 0° / 180° phase inverter switch
• AutoStandby enable / disable
• Right / left (LFE) RCA input
• High-gloss black front panel
• Black brushed MDF body
• Black magnetic grille

Related Questions and Answers

Q: 1. Why are you selling this sub-flash as a separate item to bundle with the Godox V1Pro when one is already included?

A: Due to its detachable feature as well as its small size, an owner of the Godox V1 Pro may lose this accessory during one of their photoshoots. If this were to occur, a replacement is available.

Q: 2. What is the cost per 4x6 print?

A: There would be no way to find the cost, as this printer is not able to print a 4 x 6.

Q: 3. Does this printer comes with paper already loaded or you will have to buy printing paper separate?

A: You will have to purchase and load the paper yourself. The process is pretty easy though

Q: 4. Do you need a special media for matte prints? or is the printer itself creating a matte finish?

A: Hello Glanluca, The regular media for your printer will do matte or lustre. On the setup page in your computer or in the app if sending from a phone/tablet there is a check box for Matte. The default is Lustre but you can easily change the default. We change the surface based upon the voltage from the print head on the final clear coat ribbon within the printer. Please let me know if you have any additional questions and Thank You for using HiTi products Regards, L Ahlman

Q: 5. How much output does the Sub Flash push out? It's labeled as 1/1 to 1/128, but what's the Ws output at 1/1? AKA Guide Number

A: The manufacture did not provide exact information on the power of Godox Sub-Flash for V1Pro.

Q: 6. Can you change the file name from the front 4.3" touchscreen panel when scanning to a USB drive? Is a filename change easy?

A: Yes, you can easily choose your own filter name from the touchscreen on the Epson RapidReceipt RR-600W Wireless Receipt Scanner. The process is described on page 93 of this user manual: https://bhpho.to/3U6Ncd2.

Q: 7. What screw size will the rack mount holes accept?

A: The 600W Platinum Series Public Address Amplifier Bogen PS600 (BH #BOPS600), requires the Bogen PSRPK Rackmount Installation Kit for Public Address Amplifiers in the Platinum Series, which uses standard 10/32" rack screws for installation.

Q: 8. Can I print on Mylar bags with this equipment

A: Hello Nardo, Printing on any substance other than the media designated for the P910 would not be recommended and would void any service and warranty. In the printing process for dye-sublimation there is a large amount of heat generated which could melt any material not designed for the process. L Ahlman

Q: 9. Does this printer comes with paper already loaded or you will have to buy printing paper separate?

A: The paper and color roll are sold seperately in a single kit. Due to the nature of dye-sub printers, a roll of color and paper will yield exactly the listed number of prints.

Q: 10. What is the color temperature?

A: They're 3200 k tungsten